[Pacemaker] stonith q

[Alex Samad - Yieldbroker]

> -----Original Message-----
> From: Digimer [mailto:lists at alteeve.ca]
> Sent: Sunday, 2 November 2014 9:49 AM
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] stonith q
> 
> On 01/11/14 06:27 PM, Alex Samad - Yieldbroker wrote:
> > Hi
> >
> > 2 node cluster, running under vmware
{snip}
> >
> > Alex
> 
> In cman's cluster.conf, you configure the fence device 'fence_pcmk', as you
> have. That is a dummy/hook fence agent that simply passes fence requests
> up to pacemaker to actually perform. Pacemaker will then tell cman whether
> the fence succeeded or failed.
> 
> To make sure you have cluster.conf configured properly, it should look
> something like this;
> 
> ====
> ccs -f /etc/cluster/cluster.conf --createcluster an-anvil-04 ccs -f
> /etc/cluster/cluster.conf --setcman two_node="1" expected_votes="1"
> ccs -f /etc/cluster/cluster.conf --addnode an-a04n01.alteeve.ca ccs -f
> /etc/cluster/cluster.conf --addnode an-a04n02.alteeve.ca ccs -f
> /etc/cluster/cluster.conf --addfencedev pcmk agent=fence_pcmk ccs -f
> /etc/cluster/cluster.conf --addmethod pcmk-redirect an-a04n01.alteeve.ca
> ccs -f /etc/cluster/cluster.conf --addmethod pcmk-redirect an-
> a04n02.alteeve.ca ccs -f /etc/cluster/cluster.conf --addfenceinst pcmk an-
> a04n01.alteeve.ca pcmk-redirect port=an-a04n01.alteeve.ca ccs -f
> /etc/cluster/cluster.conf --addfenceinst pcmk an-a04n02.alteeve.ca pcmk-
> redirect port=an-a04n02.alteeve.ca ccs -f /etc/cluster/cluster.conf --
> setfencedaemon post_join_delay="30"
> cat /etc/cluster/cluster.conf
> ====
> <cluster config_version="10" name="an-anvil-04">
>    <fence_daemon post_join_delay="30"/>
>    <clusternodes>
>      <clusternode name="an-a04n01.alteeve.ca" nodeid="1">
>        <fence>
>          <method name="pcmk-redirect">
>            <device name="pcmk" port="an-a04n01.alteeve.ca"/>
>          </method>
>        </fence>
>      </clusternode>
>      <clusternode name="an-a04n02.alteeve.ca" nodeid="2">
>        <fence>
>          <method name="pcmk-redirect">
>            <device name="pcmk" port="an-a04n02.alteeve.ca"/>
>          </method>
>        </fence>
>      </clusternode>
>    </clusternodes>
>    <cman expected_votes="1" two_node="1"/>
>    <fencedevices>
>      <fencedevice agent="fence_pcmk" name="pcmk"/>
>    </fencedevices>
>    <rm>
>      <failoverdomains/>
>      <resources/>
>    </rm>
> </cluster>
> ====

[Alex Samad - Yieldbroker] 
Actually I do, I just put the initial bit in there.

> 
> Then you move over to pacemaker and configure stonith there. How you do
> this will vary a bit for your fence agent. I use IPMI fencing, which looks like
> this:
> 
> ====
> pcs cluster cib stonith_cfg
> pcs -f stonith_cfg stonith create fence_n01_ipmi fence_ipmilan
> pcmk_host_list="an-a04n01.alteeve.ca" ipaddr="an-a04n01.ipmi"
> action="reboot" login="admin" passwd="Initial1" delay=15 op monitor
> interval=10s pcs -f stonith_cfg stonith create fence_n02_ipmi fence_ipmilan
> pcmk_host_list="an-a04n02.alteeve.ca" ipaddr="an-a04n02.ipmi"
> action="reboot" login="admin" passwd="Initial1" op monitor interval=10s
> pcs cluster cib-push stonith_cfg pcs property set stonith-enabled=true ====
[Alex Samad - Yieldbroker] 

Problem is that uses ipmi I don't want to use that.

I would like to translater a stonight shutdown/reboot into a OS reboot commend.

Thanks