[Pacemaker] stonith q

[Digimer]

On 01/11/14 06:27 PM, Alex Samad - Yieldbroker wrote:
> Hi
>
> 2 node cluster, running under vmware
>
> Centos 6.5
>
> pacemaker-libs-1.1.10-14.el6_5.3.x86_64
> pacemaker-cluster-libs-1.1.10-14.el6_5.3.x86_64
> pacemaker-cli-1.1.10-14.el6_5.3.x86_64
> pacemaker-1.1.10-14.el6_5.3.x86_64
>
>
> this is what I have in /etc/cluster/cluster.conf
>
>    <fencedevices>
>      <fencedevice agent="fence_pcmk" name="pcmk"/>
>    </fencedevices>
>
>
> And pcs config
> stonith-enabled: false
>
> How do I configure stonith to do a os reboot if I want to use that.
>
> I found some suse documentation to a suicide drive
> http://doc.opensuse.org/products/draft/SLE-HA/SLE-ha-guide_sd_draft/cha.ha.fencing.html
>
> but I am guess that is something deprecated or suse specific
>
> Alex

In cman's cluster.conf, you configure the fence device 'fence_pcmk', as 
you have. That is a dummy/hook fence agent that simply passes fence 
requests up to pacemaker to actually perform. Pacemaker will then tell 
cman whether the fence succeeded or failed.

To make sure you have cluster.conf configured properly, it should look 
something like this;

====
ccs -f /etc/cluster/cluster.conf --createcluster an-anvil-04
ccs -f /etc/cluster/cluster.conf --setcman two_node="1" expected_votes="1"
ccs -f /etc/cluster/cluster.conf --addnode an-a04n01.alteeve.ca
ccs -f /etc/cluster/cluster.conf --addnode an-a04n02.alteeve.ca
ccs -f /etc/cluster/cluster.conf --addfencedev pcmk agent=fence_pcmk
ccs -f /etc/cluster/cluster.conf --addmethod pcmk-redirect 
an-a04n01.alteeve.ca
ccs -f /etc/cluster/cluster.conf --addmethod pcmk-redirect 
an-a04n02.alteeve.ca
ccs -f /etc/cluster/cluster.conf --addfenceinst pcmk 
an-a04n01.alteeve.ca pcmk-redirect port=an-a04n01.alteeve.ca
ccs -f /etc/cluster/cluster.conf --addfenceinst pcmk 
an-a04n02.alteeve.ca pcmk-redirect port=an-a04n02.alteeve.ca
ccs -f /etc/cluster/cluster.conf --setfencedaemon post_join_delay="30"
cat /etc/cluster/cluster.conf
====
<cluster config_version="10" name="an-anvil-04">
   <fence_daemon post_join_delay="30"/>
   <clusternodes>
     <clusternode name="an-a04n01.alteeve.ca" nodeid="1">
       <fence>
         <method name="pcmk-redirect">
           <device name="pcmk" port="an-a04n01.alteeve.ca"/>
         </method>
       </fence>
     </clusternode>
     <clusternode name="an-a04n02.alteeve.ca" nodeid="2">
       <fence>
         <method name="pcmk-redirect">
           <device name="pcmk" port="an-a04n02.alteeve.ca"/>
         </method>
       </fence>
     </clusternode>
   </clusternodes>
   <cman expected_votes="1" two_node="1"/>
   <fencedevices>
     <fencedevice agent="fence_pcmk" name="pcmk"/>
   </fencedevices>
   <rm>
     <failoverdomains/>
     <resources/>
   </rm>
</cluster>
====

Then you move over to pacemaker and configure stonith there. How you do 
this will vary a bit for your fence agent. I use IPMI fencing, which 
looks like this:

====
pcs cluster cib stonith_cfg
pcs -f stonith_cfg stonith create fence_n01_ipmi fence_ipmilan 
pcmk_host_list="an-a04n01.alteeve.ca" ipaddr="an-a04n01.ipmi" 
action="reboot" login="admin" passwd="Initial1" delay=15 op monitor 
interval=10s
pcs -f stonith_cfg stonith create fence_n02_ipmi fence_ipmilan 
pcmk_host_list="an-a04n02.alteeve.ca" ipaddr="an-a04n02.ipmi" 
action="reboot" login="admin" passwd="Initial1" op monitor interval=10s
pcs cluster cib-push stonith_cfg
pcs property set stonith-enabled=true
====

Hope this helps.

-- 
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without 
access to education?