[Pacemaker] cluster heartbeat is not used
emmanuel segura
emi2fast at gmail.com
Mon Dec 9 15:33:41 UTC 2013
the ip is ok, but if you are using cman, you need to edit
/etc/cluster/cluster.conf, that's what i think
2013/12/9 Dvorak Andreas <Andreas.Dvorak at baaderbank.de>
> Hi,
>
>
>
> thank you for the quick answers.
>
> I thought I would need to edit the corosync.conf file. So I do not need to?
>
> Where should I configure the heartbeat interconnect interfaces?
>
>
>
> With corosync-cfgtool –s it shows the wrong ip? But where does that come
> from?
>
>
>
> Andreas
>
>
>
> *Von:* emmanuel segura [mailto:emi2fast at gmail.com]
> *Gesendet:* Montag, 9. Dezember 2013 16:05
>
> *An:* The Pacemaker cluster resource manager
> *Betreff:* Re: [Pacemaker] cluster heartbeat is not used
>
>
>
> because in your corosync-cfgtool -s you are using bonding address
>
>
>
> 2013/12/9 Dvorak Andreas <Andreas.Dvorak at baaderbank.de>
>
> Hi
>
>
>
> Here it is
>
> cat /proc/net/bonding/bond0
>
> Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
>
>
>
> Bonding Mode: fault-tolerance (active-backup)
>
> Primary Slave: None
>
> Currently Active Slave: em3
>
> MII Status: up
>
> MII Polling Interval (ms): 100
>
> Up Delay (ms): 0
>
> Down Delay (ms): 0
>
>
>
> Slave Interface: em3
>
> MII Status: up
>
> Speed: 1000 Mbps
>
> Duplex: full
>
> Link Failure Count: 0
>
> Permanent HW addr: c8:1f:66:d7:3b:fe
>
> Slave queue ID: 0
>
>
>
> Slave Interface: p3p3
>
> MII Status: up
>
> Speed: 1000 Mbps
>
> Duplex: full
>
> Link Failure Count: 0
>
> Permanent HW addr: 00:0a:f7:3e:ca:8e
>
> Slave queue ID: 0
>
>
>
> Andreas
>
>
>
> *Von:* emmanuel segura [mailto:emi2fast at gmail.com]
> *Gesendet:* Montag, 9. Dezember 2013 15:50
> *An:* The Pacemaker cluster resource manager
> *Betreff:* Re: [Pacemaker] cluster heartbeat is not used
>
>
>
> show cat /proc/net/bonding/bond0
>
>
>
> 2013/12/9 Dvorak Andreas <Andreas.Dvorak at baaderbank.de>
>
> Dear all,
>
>
>
> during failover tests I found out that I can put down the heartbeat
> interfaces and the cluster ignores that. But if I put down bond0 the
> fencing is running.
>
> Can please somebody help me?
>
>
>
> bond0 Link encap:Ethernet HWaddr C8:1F:66:D7:3B:FE
>
> inet addr:10.15.28.36 Bcast:10.15.255.255 Mask:255.255.0.0
>
> inet6 addr: fe80::ca1f:66ff:fed7:3bfe/64 Scope:Link
>
> UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
>
>
>
> em4 Link encap:Ethernet HWaddr C8:1F:66:D7:3B:FF
>
> inet addr:192.168.2.36 Bcast:192.168.2.255 Mask:255.255.255.0
>
> inet6 addr: fe80::ca1f:66ff:fed7:3bff/64 Scope:Link
>
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>
>
>
> p3p4 Link encap:Ethernet HWaddr 00:0A:F7:3E:CA:8F
>
> inet addr:192.168.3.36 Bcast:192.168.3.255 Mask:255.255.255.0
>
> inet6 addr: fe80::20a:f7ff:fe3e:ca8f/64 Scope:Link
>
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>
>
>
> I have the following corosync.conf
>
> # Please read the corosync.conf.5 manual page
>
> compatibility: whitetank
>
> totem {
>
> version: 2
>
> secauth: off
>
> threads: 0
>
> interface {
>
> ringnumber: 0
>
> bindnetaddr: 192.168.2.0
>
> mcastaddr: 226.94.1.1
>
> mcastport: 5405
>
> ttl: 1
>
> }
>
> interface {
>
> ringnumber: 1
>
> bindnetaddr: 192.168.3.0
>
> mcastaddr: 226.94.1.2
>
> mcastport: 5407
>
> ttl: 1
>
> }
>
> }
>
> logging {
>
> fileline: off
>
> to_stderr: no
>
> to_logfile: yes
>
> to_syslog: yes
>
> logfile: /var/log/cluster/corosync.log
>
> debug: off
>
> timestamp: on
>
> logger_subsys {
>
> subsys: AMF
>
> debug: off
>
> }
>
> }
>
> amf {
>
> mode: disabled
>
> }
>
>
>
> I have installed
>
> cluster-glue-libs.1.0.5.x86_64.CentOS
>
> corosynclib.1.4.1.x86_64.CentOS
>
> openais.1.1.1.x86_64.CentOS
>
> cman.3.0.12.1.x86_64.CentOS
>
> pacemaker-libs.1.1.8.x86_64.CentOS
>
> resource-agents.3.9.2.x86_64.CentOS
>
> corosync.1.4.1.x86_64.CentOS
>
> modcluster.0.16.2.x86_64.CentOS
>
> openaislib.1.1.1.x86_64.CentOS
>
> pacemaker-cluster-libs.1.1.8.x86_64.CentOS
>
> pacemaker.1.1.8.x86_64.CentOS
>
> pcs.0.9.26.noarch.CentOS
>
> libqb.0.14.2.x86_64.CentOS
>
> clusterlib.3.0.12.1.x86_64.CentOS
>
> ricci.0.16.2.x86_64.CentOS
>
> pacemaker-cli.1.1.8.x86_64.CentOS
>
> fence-virt.0.2.3.x86_64.CentOS
>
> ccs.0.16.2.x86_64.CentOS
>
>
>
> # corosync-cfgtool -s
>
> Printing ring status.
>
> Local node ID 1
>
> RING ID 0
>
> id = 10.15.28.36
>
> status = ring 0 active with no faults
>
> # pcs status corosync
>
> Nodeid Name
>
> 1 sv2836.muc.baag
>
> 2 sv2837.muc.baag
>
>
>
> # crm_mon --one-shot -V
>
> Last updated: Mon Dec 9 14:56:32 2013
>
> Last change: Mon Dec 9 14:07:03 2013 via cibadmin on sv2836
>
> Stack: cman
>
> Current DC: sv2836 - partition with quorum
>
> Version: 1.1.10-1.el6_4.4-368c726
>
> 2 Nodes configured
>
> 4 Resources configured
>
>
>
> Online: [ sv2836 sv2837 ]
>
>
>
> ClusterIP (ocf::heartbeat:IPaddr2): Started sv2836
>
> FIXRoute (ocf::baader:FIXRoute): Started sv2836
>
> ipmi-fencing-sv2837 (stonith:fence_ipmilan): Started sv2836
>
> ipmi-fencing-sv2836 (stonith:fence_ipmilan): Started sv2837
>
>
>
> Best regards
>
> Andreas Dvorak
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>
>
>
> --
> esta es mi vida e me la vivo hasta que dios quiera
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>
>
>
> --
> esta es mi vida e me la vivo hasta que dios quiera
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>
--
esta es mi vida e me la vivo hasta que dios quiera
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20131209/89e514e7/attachment.htm>
More information about the Pacemaker
mailing list