[Pacemaker] cluster heartbeat is not used

[Michael Schwartzkopff]

Am Montag, 9. Dezember 2013, 15:53:59 schrieb Dvorak Andreas:
> Hi
> 
> Here it is
> cat /proc/net/bonding/bond0
> Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
> 
> Bonding Mode: fault-tolerance (active-backup)
> Primary Slave: None
> Currently Active Slave: em3
> MII Status: up
> MII Polling Interval (ms): 100
> Up Delay (ms): 0
> Down Delay (ms): 0
> 
> Slave Interface: em3
> MII Status: up
> Speed: 1000 Mbps
> Duplex: full
> Link Failure Count: 0
> Permanent HW addr: c8:1f:66:d7:3b:fe
> Slave queue ID: 0
> 
> Slave Interface: p3p3
> MII Status: up
> Speed: 1000 Mbps
> Duplex: full
> Link Failure Count: 0
> Permanent HW addr: 00:0a:f7:3e:ca:8e
> Slave queue ID: 0
> 
> Andreas

You see that the MII Status is up.

So it seems that the bond does not catch the interface status from your device 
drivers corectly. Please optimize the bond configuration so that the bond 
interface really catches the status of the interfaces. If everything else 
fails you can fall back to miimon process sending out arps on the interfaces.

See the https://www.kernel.org/doc/Documentation/networking/bonding.txt
for details.

-- 
Mit freundlichen Grüßen,

Michael Schwartzkopff

-- 
[*] sys4 AG

http://sys4.de, +49 (89) 30 90 46 64, +49 (162) 165 0044
Franziskanerstraße 15, 81669 München

Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer
Aufsichtsratsvorsitzender: Florian Kirstein
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 230 bytes
Desc: This is a digitally signed message part.
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20131209/3cf435ba/attachment-0003.sig>