[Pacemaker] How to gang multiple APC AP7901 outlets together under the same name

Dejan Muhamedagic dejanmm at fastmail.fm
Thu Oct 11 05:33:05 EDT 2012


On Thu, Oct 11, 2012 at 11:34:20AM +1100, Andrew Beekhof wrote:
> Nice guide. You should consider adding it to the wiki.

Indeed. You can apply for an account at
http://www.linux-ha.org/wiki

Cheers,

Dejan

> On Thu, Oct 4, 2012 at 12:20 AM, Epps, Josh <josh.epps at viasat.com> wrote:
> > Procedure: How to gang multiple APC AP7901 outlets together under the same
> > name
> >
> >
> >
> > Note:    Do not include any quote marks. They are used below just to
> > indicate verbatim strings.
> >
> >          It may take perhaps 10 seconds for any changes to reflect so be
> > patient (like after clicking Apply or Next)
> >
> >
> >
> > Here is the crm config that worked for this example (yours may be
> > different). It worked out-of-box with no other configuration to the AP 7901.
> >
> >     primitive scc-stonith stonith:external/rackpdu \
> >
> >         meta target-role="Started" \
> >
> >         operations $id="scc-stonith-operations" \
> >
> >         op monitor interval="3600" timeout="200" start-delay="15" \
> >
> >         params hostlist="scc-pri" pduip="10.1.1.50" community="private"
> >
> >
> >
> > === Procedure ===
> >
> > Launch a web browser and key in the IP address of the AP 7901 as the URL. In
> > this example 10.1.1.50 is the ipaddr for our AP 7901.
> >
> >
> >
> > Here we will gang together outlets 1 and 2 under a common name "srvr-one"
> >
> >
> >
> > From within the APC web page, select the Device Manger tab
> >
> >
> >
> > Click Configuration in the left pane
> >
> >
> >
> > In the right pane, click the outlet #1 name (underlined as a link) and
> > change its name to "srvr-one"
> >
> > The external link can be any non-blank string so you can leave it as
> > "http://www.apc.com"
> >
> > Set power on delay, power off delay, and reboot duration to what you need
> >
> > Click apply
> >
> >
> >
> > In the right pane, click the outlet #2 name (underlined as a link) and
> > change its name to "srvr-one" also
> >
> > Set power on delay, power off delay, and reboot duration to match those of
> > outlet 1
> >
> > Click apply
> >
> >
> >
> > Under "Outlet Groups" in the left pane, select Information
> >
> >
> >
> > In the right pane, click the button "Create Local Outlet Group"
> >
> >
> >
> > Change the Outlet Group Name to "srvr-one" -- which is the same name as both
> > of the outlets
> >
> > Check (i.e. select) the first two outlets which are now both named
> > "srvr-one"
> >
> > Click Apply
> >
> >
> >
> > Click Next to procede to the "Select the Global Outlet for this Outlet
> > Group" window
> >
> >
> >
> > Check (i.e. select) only the first outlet of the two now named srvr-one
> >
> > Click Apply.
> >
> >
> >
> > You should notice " G1  srvr-one    1,2 " under the Group Name with its
> > associated IP address
> >
> >
> >
> > === Test the configuration ===
> >
> > In the left window pane the Device Manger tab click Control. You will see
> > the On/Off status of all eight outlets.
> >
> >
> >
> > Paste this into the command console to turn the two srvr-one outlets off
> > (assuming that they are both currently on):
> >
> > stonith -t external/rackpdu hostlist=srvr-one pduip=10.1.1.50
> > community=private -T off srvr-one
> >
> >
> >
> > Refresh the web page (F5) and verify that both outlets are off. It may take
> > 10 seconds for it to take.
> >
> >
> >
> > Paste this into the command console to turn the two srvr-one outlets on
> > (assuming that they are both currently off):
> >
> > stonith -t external/rackpdu hostlist=srvr-one pduip=10.1.1.50
> > community=private -T on srvr-one
> >
> >
> >
> > Refresh the web page (F5) and verify that both outlets are on.
> >
> >
> >
> > === end of test ====
> >
> >
> >
> >
> >
> > Josh Epps
> >
> >
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
> >
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org




More information about the Pacemaker mailing list