[Pacemaker] Could not connect to the CIB service: connection failed
Brett Delle Grazie
brett.dellegrazie at intact-is.com
Thu Aug 19 23:01:33 UTC 2010
Hi,
On Wed, 2010-08-18 at 21:33 +0200, Dejan Muhamedagic wrote:
> Hi,
>
> On Wed, Aug 18, 2010 at 04:33:27PM +0100, Brett Delle Grazie wrote:
> > Hi,
> >
> > I don't know if it is just my versions or my configuration but
> > use_mgmtd and/or use_logd cause pacemaker to fail to start with
> > the following configurations and RPMs (I'm running RHEL 5.5
> > with clusterlabs repo)
> > Let me know if you spot something amiss
>
> Nothing grave. But if really commenting out one of those two
> "fixes" starting corosync, then something's really wrong there.
> Do you have logd running? It seems like mgmtd is not installed,
> right? Though neither of these should prevent the stack running.
> Can you please post the logs somewhere.
I have logd running but starting corosync is fairly explicit about why
it doesn't work:
[root@####### service.d]# corosync -f
corosync [MAIN ] Corosync Cluster Engine ('1.2.7'): started and ready
to provide service.
corosync [MAIN ] Corosync built-in features: nss rdma
corosync [MAIN ] service: Only name and ver are allowed items
corosync [MAIN ] Corosync Cluster Engine exiting with status 8 at
main.c:1376.
Only name and ver are allowed for services.
Hope this helps.
>
> Thanks,
>
> Dejan
>
> > Thanks,
> >
> > Brett
> >
> >
> > RPMS:
> > corosync-1.2.7-1.1.el5
> > corosync-libs-1.2.7-1.1.el5
> > cluster-glue-1.0.6-1.6.el5
> > cluster-glue-libs-1.0.6-1.6.el5
> > heartbeat-3.0.3-2.el5.x86_64.rpm
> > heartbeat-libs-3.0.3-2.el5.x86_64.rpm
> > openais-1.1.3-1.6.el5.x86_64.rpm
> > openaislib-1.1.3-1.6.el5.x86_64.rpm
> > pacemaker-1.0.9.1-1.15.el5
> > pacemaker-libs-1.0.9.1-1.15.el5
> > resource-agents-1.0.3-2.6.el5
> >
> > Configuration:
> > /etc/corosync/corosync.conf:
> > compatibility: none
> > aisexec {
> > user: root
> > group: root
> > }
> >
> > totem {
> > version: 2
> >
> > # How long before declaring a token lost (ms)
> > token: 5000
> >
> > # How many token retransmits before forming a new configuration
> > token_retransmits_before_loss_const: 20
> >
> > # How long to wait for join messages in the membership protocol (ms)
> > join: 1000
> >
> > # How long to wait for consensus to be achieved before starting a new round of membership configuration (ms)
> > consensus: 7500
> >
> > # Turn off the virtual synchrony filter
> > vsftype: none
> >
> > # Number of messages that may be sent by one processor on receipt of the token
> > max_messages: 20
> >
> > # Disable encryption
> > secauth: off
> >
> > # How many threads to use for encryption/decryption
> > threads: 0
> >
> > # Limit generated nodeids to 31-bits (positive signed integers)
> > clear_node_high_bit: yes
> >
> > # Optionally assign a fixed node id (integer)
> > # nodeid: 1234
> >
> > interface {
> > ringnumber: 0
> > bindnetaddr: 10.16.2.0
> > mcastaddr: 239.255.5.2
> > mcastport: 694
> > }
> > }
> >
> > logging {
> > fileline: off
> > to_stderr: no
> > to_logfile: yes
> > to_syslog: no
> > logfile: /var/log/corosync.log
> > debug: off
> > timestamp: on
> > logger_subsys {
> > subsys: AMF
> > debug: off
> > }
> > }
> >
> > amf {
> > mode: disabled
> > }
> >
> > --END--
> >
> > /etc/corosync/service.d/pcmk:
> > service {
> > # Load the Pacemaker Cluster Resource Manager
> > name: pacemaker
> > ver: 0
> > # Either of these causes pacemaker to fail to start
> > #use_mgmtd: yes
> > #use_logd: yes
> > }
> >
> > --END--
> >
> > -----Original Message-----
> > From: Dejan Muhamedagic [mailto:dejanmm at fastmail.fm]
> > Sent: Tue 17/08/2010 13:01
> > To: The Pacemaker cluster resource manager
> > Subject: Re: [Pacemaker] Could not connect to the CIB service: connection failed
> >
> > Hi,
> >
> > On Tue, Aug 17, 2010 at 10:28:01AM +0100, Brett Delle Grazie wrote:
> > > Hi,
> > >
> > > Are you using backports or the madkis repository?
> > > For lenny you should be using backports.
> > >
> > > I had a similar problem, remove the 'use_logd' and 'use_mgmtd' lines from your
> > > service entry for pacemaker. Try just removing the use_logd first.
> > >
> > > I think the current version(s) of pacemaker no longer use logd or the service
> > > definition in corosync no longer supports it.
> >
> > Really? Hmm, nobody told me. At any rate, that'd be a serious
> > regression and would break some existing installations.
> > Otherwise, it could be that it's unintentionally broken. If so,
> > then the packages need to be fixed.
> >
> > > btw, my service definition for pacemaker is in a separate file in /etc/corosync/services.d/
> > >
> > > (or some similar directory - I can't quite remember and I'm not at my system at the moment).
> >
> > /etc/corosync/service.d
> >
> > Thanks,
> >
> > Dejan
> >
> > >
> > > Hope this helps.
> > >
> > > Brett
> > >
> > >
> > > -----Original Message-----
> > > From: Bastian Schern [mailto:ml04 at reventix.de]
> > > Sent: Tue 17/08/2010 10:08
> > > To: The Pacemaker cluster resource manager
> > > Subject: [Pacemaker] Could not connect to the CIB service: connection failed
> > >
> > > Hallo,
> > >
> > > I tried to install Pacemaker with Corosync on Debian Lenny based on the
> > > HowTo: http://www.clusterlabs.org/wiki/Debian_Lenny_HowTo
> > >
> > > Some month ago I already set up my first working Cluster on Lenny
> > > without any problems.
> > >
> > > But now on two new hosts I'm not able to get the CRM working. Corosync
> > > itself seems to work.
> > >
> > > I attached my corosync.conf and the corresponding log lines.
> > >
> > > Does anybody know what's going wrong?
> > >
> > > Thanks
> > > Bastian
> > >
> >
> > ______________________________________________________________________
> > This email has been scanned by the MessageLabs Email Security System.
> > For more information please visit http://www.messagelabs.com/email
> > ______________________________________________________________________
>
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>
>
>
--
Best Regards,
Brett Delle Grazie
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
More information about the Pacemaker
mailing list