[Pacemaker] Could not connect to the CIB service: connection failed
Dejan Muhamedagic
dejanmm at fastmail.fm
Wed Aug 18 19:33:47 UTC 2010
Hi,
On Wed, Aug 18, 2010 at 04:33:27PM +0100, Brett Delle Grazie wrote:
> Hi,
>
> I don't know if it is just my versions or my configuration but
> use_mgmtd and/or use_logd cause pacemaker to fail to start with
> the following configurations and RPMs (I'm running RHEL 5.5
> with clusterlabs repo)
> Let me know if you spot something amiss
Nothing grave. But if really commenting out one of those two
"fixes" starting corosync, then something's really wrong there.
Do you have logd running? It seems like mgmtd is not installed,
right? Though neither of these should prevent the stack running.
Can you please post the logs somewhere.
Thanks,
Dejan
> Thanks,
>
> Brett
>
>
> RPMS:
> corosync-1.2.7-1.1.el5
> corosync-libs-1.2.7-1.1.el5
> cluster-glue-1.0.6-1.6.el5
> cluster-glue-libs-1.0.6-1.6.el5
> heartbeat-3.0.3-2.el5.x86_64.rpm
> heartbeat-libs-3.0.3-2.el5.x86_64.rpm
> openais-1.1.3-1.6.el5.x86_64.rpm
> openaislib-1.1.3-1.6.el5.x86_64.rpm
> pacemaker-1.0.9.1-1.15.el5
> pacemaker-libs-1.0.9.1-1.15.el5
> resource-agents-1.0.3-2.6.el5
>
> Configuration:
> /etc/corosync/corosync.conf:
> compatibility: none
> aisexec {
> user: root
> group: root
> }
>
> totem {
> version: 2
>
> # How long before declaring a token lost (ms)
> token: 5000
>
> # How many token retransmits before forming a new configuration
> token_retransmits_before_loss_const: 20
>
> # How long to wait for join messages in the membership protocol (ms)
> join: 1000
>
> # How long to wait for consensus to be achieved before starting a new round of membership configuration (ms)
> consensus: 7500
>
> # Turn off the virtual synchrony filter
> vsftype: none
>
> # Number of messages that may be sent by one processor on receipt of the token
> max_messages: 20
>
> # Disable encryption
> secauth: off
>
> # How many threads to use for encryption/decryption
> threads: 0
>
> # Limit generated nodeids to 31-bits (positive signed integers)
> clear_node_high_bit: yes
>
> # Optionally assign a fixed node id (integer)
> # nodeid: 1234
>
> interface {
> ringnumber: 0
> bindnetaddr: 10.16.2.0
> mcastaddr: 239.255.5.2
> mcastport: 694
> }
> }
>
> logging {
> fileline: off
> to_stderr: no
> to_logfile: yes
> to_syslog: no
> logfile: /var/log/corosync.log
> debug: off
> timestamp: on
> logger_subsys {
> subsys: AMF
> debug: off
> }
> }
>
> amf {
> mode: disabled
> }
>
> --END--
>
> /etc/corosync/service.d/pcmk:
> service {
> # Load the Pacemaker Cluster Resource Manager
> name: pacemaker
> ver: 0
> # Either of these causes pacemaker to fail to start
> #use_mgmtd: yes
> #use_logd: yes
> }
>
> --END--
>
> -----Original Message-----
> From: Dejan Muhamedagic [mailto:dejanmm at fastmail.fm]
> Sent: Tue 17/08/2010 13:01
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] Could not connect to the CIB service: connection failed
>
> Hi,
>
> On Tue, Aug 17, 2010 at 10:28:01AM +0100, Brett Delle Grazie wrote:
> > Hi,
> >
> > Are you using backports or the madkis repository?
> > For lenny you should be using backports.
> >
> > I had a similar problem, remove the 'use_logd' and 'use_mgmtd' lines from your
> > service entry for pacemaker. Try just removing the use_logd first.
> >
> > I think the current version(s) of pacemaker no longer use logd or the service
> > definition in corosync no longer supports it.
>
> Really? Hmm, nobody told me. At any rate, that'd be a serious
> regression and would break some existing installations.
> Otherwise, it could be that it's unintentionally broken. If so,
> then the packages need to be fixed.
>
> > btw, my service definition for pacemaker is in a separate file in /etc/corosync/services.d/
> >
> > (or some similar directory - I can't quite remember and I'm not at my system at the moment).
>
> /etc/corosync/service.d
>
> Thanks,
>
> Dejan
>
> >
> > Hope this helps.
> >
> > Brett
> >
> >
> > -----Original Message-----
> > From: Bastian Schern [mailto:ml04 at reventix.de]
> > Sent: Tue 17/08/2010 10:08
> > To: The Pacemaker cluster resource manager
> > Subject: [Pacemaker] Could not connect to the CIB service: connection failed
> >
> > Hallo,
> >
> > I tried to install Pacemaker with Corosync on Debian Lenny based on the
> > HowTo: http://www.clusterlabs.org/wiki/Debian_Lenny_HowTo
> >
> > Some month ago I already set up my first working Cluster on Lenny
> > without any problems.
> >
> > But now on two new hosts I'm not able to get the CRM working. Corosync
> > itself seems to work.
> >
> > I attached my corosync.conf and the corresponding log lines.
> >
> > Does anybody know what's going wrong?
> >
> > Thanks
> > Bastian
> >
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
More information about the Pacemaker
mailing list