[Pacemaker] Segfault on monitor resource

Tue Jan 27 14:18:13 UTC 2015

 Hi,

I've checked the resource graphs I have, and the resources were fine, so I
think it's not a problem due to a high use of memory or something like that.
And unfortunately I don't have a core dump to analize(I'll enable it for a
future case) so the only thing I have are the logs.

For the line below, I though that was the process in charge to monitore
nginx what was killed due to a segfault:

RA output: (Nginx-rsc:monitor:stderr) Segmentation fault

I've checked the Nginx logs, and there is nothing worth there, actually
there is no activity, so I think it has to be something internal what
caused the failure.
I'll enable coredumps, it's the only thing I can do for now.

Thank you very much

Oscar

2015-01-27 10:39 GMT+01:00 Dejan Muhamedagic <dejanmm at fastmail.fm>:

> Hi,
>
> On Mon, Jan 26, 2015 at 06:20:35PM +0100, Oscar Salvador wrote:
> > Hi!
> >
> > I'm writing here because two days ago I experienced a strange problem in
> my
> > Pacemaker Cluster.
> > Everything was working fine, till suddenly a Segfault in Nginx monitor
> > resource happened:
> >
> > Jan 25 03:55:24 lb02 crmd: [9975]: notice: run_graph: ==== Transition
> 7551
> > (Complete=0, Pending=0, Fired=0, Skipped=0, Incomplete=0,
> > Source=/var/lib/pengine/pe-input-90.bz2): Complete
> > Jan 25 03:55:24 lb02 crmd: [9975]: notice: do_state_transition: State
> > transition S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS
> > cause=C_FSA_INTERNAL origin=notify_crmd ]
> > Jan 25 04:00:08 lb02 cib: [9971]: info: cib_stats: Processed 1 operations
> > (0.00us average, 0% utilization) in the last 10min
> > Jan 25 04:10:24 lb02 crmd: [9975]: info: crm_timer_popped: PEngine
> Recheck
> > Timer (I_PE_CALC) just popped (900000ms)
> > Jan 25 04:10:24 lb02 crmd: [9975]: notice: do_state_transition: State
> > transition S_IDLE -> S_POLICY_ENGINE [ input=I_PE_CALC
> cause=C_TIMER_POPPED
> > origin=crm_timer_popped ]
> > Jan 25 04:10:24 lb02 crmd: [9975]: info: do_state_transition: Progressed
> to
> > state S_POLICY_ENGINE after C_TIMER_POPPED
> > Jan 25 04:10:24 lb02 pengine: [10028]: WARN: unpack_rsc_op: Processing
> > failed op Ldirector-rsc_last_failure_0 on lb02: not running (7)
> > Jan 25 04:10:24 lb02 pengine: [10028]: notice: common_apply_stickiness:
> > Ldirector-rsc can fail 999997 more times on lb02 before being forced off
> > Jan 25 04:10:24 lb02 crmd: [9975]: notice: do_state_transition: State
> > transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
> > cause=C_IPC_MESSAGE origin=handle_response ]
> > Jan 25 04:10:24 lb02 pengine: [10028]: notice: process_pe_message:
> > Transition 7552: PEngine Input stored in:
> /var/lib/pengine/pe-input-90.bz2
> > Jan 25 04:10:24 lb02 crmd: [9975]: info: do_te_invoke: Processing graph
> > 7552 (ref=pe_calc-dc-1422155424-7644) derived from
> > /var/lib/pengine/pe-input-90.bz2
> > Jan 25 04:10:24 lb02 crmd: [9975]: notice: run_graph: ==== Transition
> 7552
> > (Complete=0, Pending=0, Fired=0, Skipped=0, Incomplete=0,
> > Source=/var/lib/pengine/pe-input-90.bz2): Complete
> > Jan 25 04:10:24 lb02 crmd: [9975]: notice: do_state_transition: State
> > transition S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS
> > cause=C_FSA_INTERNAL origin=notify_crmd ]
> >
> >
> > Jan 25 04:10:30 lb02 lrmd: [9972]: info: RA output:
> > (Nginx-rsc:monitor:stderr) Segmentation fault   ******* here it starts
>
> What exactly did segfault? Do you have a core dump to examine?
>
> > As you can see, the last line.
> > And then:
> >
> > Jan 25 04:10:30 lb02 lrmd: [9972]: info: RA output:
> > (Nginx-rsc:monitor:stderr) Killed
> > /usr/lib/ocf/resource.d//heartbeat/nginx: 910:
> > /usr/lib/ocf/resource.d//heartbeat/nginx: Cannot fork
>
> This could be related to the segfault, or due to other serious
> system error.
>
> > I guess here Nginx was killed.
> >
> > And then I have some others errors till Pacemaker decide to move the
> > resources to the node:
> >
> > Jan 25 04:10:30 lb02 crmd: [9975]: info: process_lrm_event: LRM operation
> > Nginx-rsc_monitor_10000 (call=52, rc=2, cib-update=7633, confirmed=false)
> > invalid parameter
> > Jan 25 04:10:30 lb02 crmd: [9975]: info: process_graph_event: Detected
> > action Nginx-rsc_monitor_10000 from a different transition: 5739 vs. 7552
> > Jan 25 04:10:30 lb02 crmd: [9975]: info: abort_transition_graph:
> > process_graph_event:476 - Triggered transition abort (complete=1,
> > tag=lrm_rsc_op, id=Nginx-rsc_last_failure_0,
> > magic=0:2;4:5739:0:42d1ed53-9686-4174-84e7-d2c230ed8832, cib=
> > 3.14.40) : Old event
> > Jan 25 04:10:30 lb02 crmd: [9975]: WARN: update_failcount: Updating
> > failcount for Nginx-rsc on lb02 after failed monitor: rc=2
> (update=value++,
> > time=1422155430)
> > Jan 25 04:10:30 lb02 crmd: [9975]: notice: do_state_transition: State
> > transition S_IDLE -> S_POLICY_ENGINE [ input=I_PE_CALC
> cause=C_FSA_INTERNAL
> > origin=abort_transition_graph ]
> > Jan 25 04:10:30 lb02 attrd: [9974]: info: log-rotate detected on logfile
> > /var/log/ha-log
> > Jan 25 04:10:30 lb02 attrd: [9974]: notice: attrd_trigger_update: Sending
> > flush op to all hosts for: fail-count-Nginx-rsc (1)
> > Jan 25 04:10:30 lb02 pengine: [10028]: ERROR: unpack_rsc_op: Preventing
> > Nginx-rsc from re-starting on lb02: operation monitor failed 'invalid
> > parameter' (rc=2)
> > Jan 25 04:10:30 lb02 pengine: [10028]: WARN: unpack_rsc_op: Processing
> > failed op Nginx-rsc_last_failure_0 on lb02: invalid parameter (2)
> > Jan 25 04:10:30 lb02 pengine: [10028]: WARN: unpack_rsc_op: Processing
> > failed op Ldirector-rsc_last_failure_0 on lb02: not running (7)
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: common_apply_stickiness:
> > Ldirector-rsc can fail 999997 more times on lb02 before being forced off
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
> >  IP-rsc_mysql (lb02)
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
> >  IP-rsc_nginx (lb02)
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
> >  IP-rsc_nginx6        (lb02)
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
> >  IP-rsc_elasticsearch (lb02)
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Move
> >  Ldirector-rsc        (Started lb02 -> lb01)
> > Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Move
> >  Nginx-rsc    (Started lb02 -> lb01)
> > Jan 25 04:10:30 lb02 attrd: [9974]: notice: attrd_perform_update: Sent
> > update 23: fail-count-Nginx-rsc=1
> > Jan 25 04:10:30 lb02 attrd: [9974]: notice: attrd_trigger_update: Sending
> > flush op to all hosts for: last-failure-Nginx-rsc (1422155430)
> >
> > I see that Pacemaker is complaining about some errors like "invalid
> > paraemter", for example in these lines:
>
> That error code is what the nginx RA exited with. It's unusual,
> but perhaps also due to the segfault.
>
> Thanks,
>
> Dejan
>
> > Jan 25 04:10:30 lb02 crmd: [9975]: info: process_lrm_event: LRM operation
> > Nginx-rsc_monitor_10000 (call=52, rc=2, cib-update=7633, confirmed=false)
> > invalid parameter
> >
> > Jan 25 04:10:30 lb02 pengine: [10028]: ERROR: unpack_rsc_op: Preventing
> > Nginx-rsc from re-starting on lb02: operation monitor failed 'invalid
> > parameter' (rc=2)
> >
> > It sounds(for me) like a syntax problem defining the resources, but I've
> > checked the confic with crm_verify and there is no error:
> >
> > root# (S) crm_verify -LVV
> > root# (S)
> >
> > So I'm just wondering why pacemaker is complaining about an invalid
> > parameter.
> >
> > This is my CIB objetcs:
> >
> > node $id="43b2c5a1-9552-4438-962b-6e98a2dd67c7" lb01
> > node $id="68328520-68e0-42fd-9adf-062655691643" lb02
> > primitive IP-rsc_elasticsearch ocf:heartbeat:IPaddr2 \
> > params ip="xx.xx.xx.xx" nic="eth0" cidr_netmask="255.255.255.224"
> > primitive IP-rsc_elasticsearch6 ocf:heartbeat:IPv6addr \
> > params ipv6addr="xxxxxxxxxxxxxxxx" \
> > op monitor interval="10s"
> > primitive IP-rsc_mysql ocf:heartbeat:IPaddr2 \
> > params ip="xx.xx.xx.xx" nic="eth0" cidr_netmask="255.255.255.224"
> > primitive IP-rsc_mysql6 ocf:heartbeat:IPv6addr \
> > params ipv6addr="xxxxxxxxxxxxxx" \
> > op monitor interval="10s"
> > primitive IP-rsc_nginx ocf:heartbeat:IPaddr2 \
> > params ip="xx.xx.xx.xx" nic="eth0" cidr_netmask="255.255.255.224"
> > primitive IP-rsc_nginx6 ocf:heartbeat:IPv6addr \
> > params ipv6addr="xxxxxxxxxxxxxx" \
> > op monitor interval="10s"
> > primitive Ldirector-rsc ocf:heartbeat:ldirectord \
> > op monitor interval="10s" timeout="30s"
> > primitive Nginx-rsc ocf:heartbeat:nginx \
> > op monitor interval="10s" timeout="30s"
> > location cli-standby-IP-rsc_elasticsearch6 IP-rsc_elasticsearch6 \
> > rule $id="cli-standby-rule-IP-rsc_elasticsearch6" -inf: #uname eq lb01
> > location cli-standby-IP-rsc_mysql IP-rsc_mysql \
> > rule $id="cli-standby-rule-IP-rsc_mysql" -inf: #uname eq lb01
> > location cli-standby-IP-rsc_mysql6 IP-rsc_mysql6 \
> > rule $id="cli-standby-rule-IP-rsc_mysql6" -inf: #uname eq lb01
> > location cli-standby-IP-rsc_nginx IP-rsc_nginx \
> > rule $id="cli-standby-rule-IP-rsc_nginx" -inf: #uname eq lb01
> > location cli-standby-IP-rsc_nginx6 IP-rsc_nginx6 \
> > rule $id="cli-standby-rule-IP-rsc_nginx6" -inf: #uname eq lb01
> > colocation hcu_c inf: Nginx-rsc Ldirector-rsc IP-rsc_mysql IP-rsc_nginx
> > IP-rsc_nginx6 IP-rsc_elasticsearch
> > order hcu_o inf: IP-rsc_nginx IP-rsc_nginx6 IP-rsc_mysql Ldirector-rsc
> > Nginx-rsc IP-rsc_elasticsearch
> > property $id="cib-bootstrap-options" \
> > dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \
> > cluster-infrastructure="Heartbeat" \
> > stonith-enabled="false
> >
> >
> > Do you have some hints that I can follow?
> >
> > Thanks in advance!
> >
> > Oscar
>
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20150127/10e22d1a/attachment.htm>