[Pacemaker] Segfault on monitor resource

Mon Jan 26 17:20:35 UTC 2015

Hi!

I'm writing here because two days ago I experienced a strange problem in my
Pacemaker Cluster.
Everything was working fine, till suddenly a Segfault in Nginx monitor
resource happened:

Jan 25 03:55:24 lb02 crmd: [9975]: notice: run_graph: ==== Transition 7551
(Complete=0, Pending=0, Fired=0, Skipped=0, Incomplete=0,
Source=/var/lib/pengine/pe-input-90.bz2): Complete
Jan 25 03:55:24 lb02 crmd: [9975]: notice: do_state_transition: State
transition S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS
cause=C_FSA_INTERNAL origin=notify_crmd ]
Jan 25 04:00:08 lb02 cib: [9971]: info: cib_stats: Processed 1 operations
(0.00us average, 0% utilization) in the last 10min
Jan 25 04:10:24 lb02 crmd: [9975]: info: crm_timer_popped: PEngine Recheck
Timer (I_PE_CALC) just popped (900000ms)
Jan 25 04:10:24 lb02 crmd: [9975]: notice: do_state_transition: State
transition S_IDLE -> S_POLICY_ENGINE [ input=I_PE_CALC cause=C_TIMER_POPPED
origin=crm_timer_popped ]
Jan 25 04:10:24 lb02 crmd: [9975]: info: do_state_transition: Progressed to
state S_POLICY_ENGINE after C_TIMER_POPPED
Jan 25 04:10:24 lb02 pengine: [10028]: WARN: unpack_rsc_op: Processing
failed op Ldirector-rsc_last_failure_0 on lb02: not running (7)
Jan 25 04:10:24 lb02 pengine: [10028]: notice: common_apply_stickiness:
Ldirector-rsc can fail 999997 more times on lb02 before being forced off
Jan 25 04:10:24 lb02 crmd: [9975]: notice: do_state_transition: State
transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
cause=C_IPC_MESSAGE origin=handle_response ]
Jan 25 04:10:24 lb02 pengine: [10028]: notice: process_pe_message:
Transition 7552: PEngine Input stored in: /var/lib/pengine/pe-input-90.bz2
Jan 25 04:10:24 lb02 crmd: [9975]: info: do_te_invoke: Processing graph
7552 (ref=pe_calc-dc-1422155424-7644) derived from
/var/lib/pengine/pe-input-90.bz2
Jan 25 04:10:24 lb02 crmd: [9975]: notice: run_graph: ==== Transition 7552
(Complete=0, Pending=0, Fired=0, Skipped=0, Incomplete=0,
Source=/var/lib/pengine/pe-input-90.bz2): Complete
Jan 25 04:10:24 lb02 crmd: [9975]: notice: do_state_transition: State
transition S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS
cause=C_FSA_INTERNAL origin=notify_crmd ]

Jan 25 04:10:30 lb02 lrmd: [9972]: info: RA output:
(Nginx-rsc:monitor:stderr) Segmentation fault   ******* here it starts

As you can see, the last line.
And then:

Jan 25 04:10:30 lb02 lrmd: [9972]: info: RA output:
(Nginx-rsc:monitor:stderr) Killed
/usr/lib/ocf/resource.d//heartbeat/nginx: 910:
/usr/lib/ocf/resource.d//heartbeat/nginx: Cannot fork

I guess here Nginx was killed.

And then I have some others errors till Pacemaker decide to move the
resources to the node:

Jan 25 04:10:30 lb02 crmd: [9975]: info: process_lrm_event: LRM operation
Nginx-rsc_monitor_10000 (call=52, rc=2, cib-update=7633, confirmed=false)
invalid parameter
Jan 25 04:10:30 lb02 crmd: [9975]: info: process_graph_event: Detected
action Nginx-rsc_monitor_10000 from a different transition: 5739 vs. 7552
Jan 25 04:10:30 lb02 crmd: [9975]: info: abort_transition_graph:
process_graph_event:476 - Triggered transition abort (complete=1,
tag=lrm_rsc_op, id=Nginx-rsc_last_failure_0,
magic=0:2;4:5739:0:42d1ed53-9686-4174-84e7-d2c230ed8832, cib=
3.14.40) : Old event
Jan 25 04:10:30 lb02 crmd: [9975]: WARN: update_failcount: Updating
failcount for Nginx-rsc on lb02 after failed monitor: rc=2 (update=value++,
time=1422155430)
Jan 25 04:10:30 lb02 crmd: [9975]: notice: do_state_transition: State
transition S_IDLE -> S_POLICY_ENGINE [ input=I_PE_CALC cause=C_FSA_INTERNAL
origin=abort_transition_graph ]
Jan 25 04:10:30 lb02 attrd: [9974]: info: log-rotate detected on logfile
/var/log/ha-log
Jan 25 04:10:30 lb02 attrd: [9974]: notice: attrd_trigger_update: Sending
flush op to all hosts for: fail-count-Nginx-rsc (1)
Jan 25 04:10:30 lb02 pengine: [10028]: ERROR: unpack_rsc_op: Preventing
Nginx-rsc from re-starting on lb02: operation monitor failed 'invalid
parameter' (rc=2)
Jan 25 04:10:30 lb02 pengine: [10028]: WARN: unpack_rsc_op: Processing
failed op Nginx-rsc_last_failure_0 on lb02: invalid parameter (2)
Jan 25 04:10:30 lb02 pengine: [10028]: WARN: unpack_rsc_op: Processing
failed op Ldirector-rsc_last_failure_0 on lb02: not running (7)
Jan 25 04:10:30 lb02 pengine: [10028]: notice: common_apply_stickiness:
Ldirector-rsc can fail 999997 more times on lb02 before being forced off
Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
 IP-rsc_mysql (lb02)
Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
 IP-rsc_nginx (lb02)
Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
 IP-rsc_nginx6        (lb02)
Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Stop
 IP-rsc_elasticsearch (lb02)
Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Move
 Ldirector-rsc        (Started lb02 -> lb01)
Jan 25 04:10:30 lb02 pengine: [10028]: notice: LogActions: Move
 Nginx-rsc    (Started lb02 -> lb01)
Jan 25 04:10:30 lb02 attrd: [9974]: notice: attrd_perform_update: Sent
update 23: fail-count-Nginx-rsc=1
Jan 25 04:10:30 lb02 attrd: [9974]: notice: attrd_trigger_update: Sending
flush op to all hosts for: last-failure-Nginx-rsc (1422155430)

I see that Pacemaker is complaining about some errors like "invalid
paraemter", for example in these lines:

Jan 25 04:10:30 lb02 crmd: [9975]: info: process_lrm_event: LRM operation
Nginx-rsc_monitor_10000 (call=52, rc=2, cib-update=7633, confirmed=false)
invalid parameter

Jan 25 04:10:30 lb02 pengine: [10028]: ERROR: unpack_rsc_op: Preventing
Nginx-rsc from re-starting on lb02: operation monitor failed 'invalid
parameter' (rc=2)

It sounds(for me) like a syntax problem defining the resources, but I've
checked the confic with crm_verify and there is no error:

root# (S) crm_verify -LVV
root# (S)

So I'm just wondering why pacemaker is complaining about an invalid
parameter.

This is my CIB objetcs:

node $id="43b2c5a1-9552-4438-962b-6e98a2dd67c7" lb01
node $id="68328520-68e0-42fd-9adf-062655691643" lb02
primitive IP-rsc_elasticsearch ocf:heartbeat:IPaddr2 \
params ip="xx.xx.xx.xx" nic="eth0" cidr_netmask="255.255.255.224"
primitive IP-rsc_elasticsearch6 ocf:heartbeat:IPv6addr \
params ipv6addr="xxxxxxxxxxxxxxxx" \
op monitor interval="10s"
primitive IP-rsc_mysql ocf:heartbeat:IPaddr2 \
params ip="xx.xx.xx.xx" nic="eth0" cidr_netmask="255.255.255.224"
primitive IP-rsc_mysql6 ocf:heartbeat:IPv6addr \
params ipv6addr="xxxxxxxxxxxxxx" \
op monitor interval="10s"
primitive IP-rsc_nginx ocf:heartbeat:IPaddr2 \
params ip="xx.xx.xx.xx" nic="eth0" cidr_netmask="255.255.255.224"
primitive IP-rsc_nginx6 ocf:heartbeat:IPv6addr \
params ipv6addr="xxxxxxxxxxxxxx" \
op monitor interval="10s"
primitive Ldirector-rsc ocf:heartbeat:ldirectord \
op monitor interval="10s" timeout="30s"
primitive Nginx-rsc ocf:heartbeat:nginx \
op monitor interval="10s" timeout="30s"
location cli-standby-IP-rsc_elasticsearch6 IP-rsc_elasticsearch6 \
rule $id="cli-standby-rule-IP-rsc_elasticsearch6" -inf: #uname eq lb01
location cli-standby-IP-rsc_mysql IP-rsc_mysql \
rule $id="cli-standby-rule-IP-rsc_mysql" -inf: #uname eq lb01
location cli-standby-IP-rsc_mysql6 IP-rsc_mysql6 \
rule $id="cli-standby-rule-IP-rsc_mysql6" -inf: #uname eq lb01
location cli-standby-IP-rsc_nginx IP-rsc_nginx \
rule $id="cli-standby-rule-IP-rsc_nginx" -inf: #uname eq lb01
location cli-standby-IP-rsc_nginx6 IP-rsc_nginx6 \
rule $id="cli-standby-rule-IP-rsc_nginx6" -inf: #uname eq lb01
colocation hcu_c inf: Nginx-rsc Ldirector-rsc IP-rsc_mysql IP-rsc_nginx
IP-rsc_nginx6 IP-rsc_elasticsearch
order hcu_o inf: IP-rsc_nginx IP-rsc_nginx6 IP-rsc_mysql Ldirector-rsc
Nginx-rsc IP-rsc_elasticsearch
property $id="cib-bootstrap-options" \
dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \
cluster-infrastructure="Heartbeat" \
stonith-enabled="false

Do you have some hints that I can follow?

Thanks in advance!

Oscar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20150126/d4dc31cd/attachment-0003.html>