[Pacemaker] Pacemaker/corosync freeze
Attila Megyeri
amegyeri at minerva-soft.com
Tue Mar 11 14:54:06 UTC 2014
> -----Original Message-----
> From: Andrew Beekhof [mailto:andrew at beekhof.net]
> Sent: Tuesday, March 11, 2014 12:48 AM
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] Pacemaker/corosync freeze
>
>
> On 7 Mar 2014, at 5:54 pm, Attila Megyeri <amegyeri at minerva-soft.com>
> wrote:
>
> > Thanks for the quick response!
> >
> >> -----Original Message-----
> >> From: Andrew Beekhof [mailto:andrew at beekhof.net]
> >> Sent: Friday, March 07, 2014 3:48 AM
> >> To: The Pacemaker cluster resource manager
> >> Subject: Re: [Pacemaker] Pacemaker/corosync freeze
> >>
> >>
> >> On 7 Mar 2014, at 5:31 am, Attila Megyeri <amegyeri at minerva-soft.com>
> >> wrote:
> >>
> >>> Hello,
> >>>
> >>> We have a strange issue with Corosync/Pacemaker.
> >>> From time to time, something unexpected happens and suddenly the
> >> crm_mon output remains static.
> >>> When I check the cpu usage, I see that one of the cores uses 100%
> >>> cpu, but
> >> cannot actually match it to either the corosync or one of the
> >> pacemaker processes.
> >>>
> >>> In such a case, this high CPU usage is happening on all 7 nodes.
> >>> I have to manually go to each node, stop pacemaker, restart
> >>> corosync, then
> >> start pacemeker. Stoping pacemaker and corosync does not work in most
> >> of the cases, usually a kill -9 is needed.
> >>>
> >>> Using corosync 2.3.0, pacemaker 1.1.10 on Ubuntu trusty.
> >>>
> >>> Using udpu as transport, two rings on Gigabit ETH, rro_mode passive.
> >>>
> >>> Logs are usually flooded with CPG related messages, such as:
> >>>
> >>> Mar 06 18:10:49 [1316] ctsip1 crmd: info: crm_cs_flush: Sent 0
> CPG
> >> messages (1 remaining, last=8): Try again (6)
> >>> Mar 06 18:10:49 [1316] ctsip1 crmd: info: crm_cs_flush: Sent 0
> CPG
> >> messages (1 remaining, last=8): Try again (6)
> >>> Mar 06 18:10:50 [1316] ctsip1 crmd: info: crm_cs_flush: Sent 0
> CPG
> >> messages (1 remaining, last=8): Try again (6)
> >>> Mar 06 18:10:50 [1316] ctsip1 crmd: info: crm_cs_flush: Sent 0
> CPG
> >> messages (1 remaining, last=8): Try again (6)
> >>>
> >>> OR
> >>>
> >>> Mar 06 17:46:24 [1341] ctdb1 cib: info: crm_cs_flush: Sent 0 CPG
> >> messages (1 remaining, last=10933): Try again (
> >>> Mar 06 17:46:24 [1341] ctdb1 cib: info: crm_cs_flush: Sent 0 CPG
> >> messages (1 remaining, last=10933): Try again (
> >>> Mar 06 17:46:24 [1341] ctdb1 cib: info: crm_cs_flush: Sent 0 CPG
> >> messages (1 remaining, last=10933): Try again (
> >>
> >> That is usually a symptom of corosync getting into a horribly confused
> state.
> >> Version? Distro? Have you checked for an update?
> >> Odd that the user of all that CPU isn't showing up though.
> >>
> >>>
> >
> > As I wrote I use Ubuntu trusty, the exact package versions are:
> >
> > corosync 2.3.0-1ubuntu5
> > pacemaker 1.1.10+git20130802-1ubuntu2
>
> Ah sorry, I seem to have missed that part.
>
> >
> > There are no updates available. The only option is to install from sources,
> but that would be very difficult to maintain and I'm not sure I would get rid of
> this issue.
> >
> > What do you recommend?
>
> The same thing as Lars, or switch to a distro that stays current with upstream
> (git shows 5 newer releases for that branch since it was released 3 years
> ago).
> If you do build from source, its probably best to go with v1.4.6
Hm, I am a bit confused here. We are using 2.3.0, which was released approx. a year ago (you mention 3 years) and you recommend 1.4.6, which is a rather old version.
Could you please clarify a bit? :)
Lars recommends 2.3.3 git tree.
I might end up trying both, but just want to make sure I am not misunderstanding something badly.
Thank you!
>
> >
> >
> >>>
> >>> HTOP show something like this (sorted by TIME+ descending):
> >>>
> >>>
> >>>
> >>> 1 [||||||||||||||||||||||||||||||||||||||||100.0%] Tasks: 59, 4
> >> thr; 2 running
> >>> 2 [| 0.7%] Load average: 1.00 0.99 1.02
> >>> Mem[|||||||||||||||||||||||||||||||| 165/994MB] Uptime: 1
> >> day, 10:22:03
> >>> Swp[ 0/509MB]
> >>>
> >>> PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command
> >>> 921 root 20 0 188M 49220 33856 R 0.0 4.8 3h33:58
> /usr/sbin/corosync
> >>> 1277 snmp 20 0 45708 4248 1472 S 0.0 0.4 1:33.07 /usr/sbin/snmpd
> -
> >> Lsd -Lf /dev/null -u snmp -g snm
> >>> 1311 hacluster 20 0 109M 16160 9640 S 0.0 1.6 1:12.71
> >> /usr/lib/pacemaker/cib
> >>> 1312 root 20 0 104M 7484 3780 S 0.0 0.7 0:38.06
> >> /usr/lib/pacemaker/stonithd
> >>> 1611 root -2 0 4408 2356 2000 S 0.0 0.2 0:24.15 /usr/sbin/watchdog
> >>> 1316 hacluster 20 0 122M 9756 5924 S 0.0 1.0 0:22.62
> >> /usr/lib/pacemaker/crmd
> >>> 1313 root 20 0 81784 3800 2876 S 0.0 0.4 0:18.64
> >> /usr/lib/pacemaker/lrmd
> >>> 1314 hacluster 20 0 96616 4132 2604 S 0.0 0.4 0:16.01
> >> /usr/lib/pacemaker/attrd
> >>> 1309 root 20 0 104M 4804 2580 S 0.0 0.5 0:15.56 pacemakerd
> >>> 1250 root 20 0 33000 1192 928 S 0.0 0.1 0:13.59 ha_logd: read
> process
> >>> 1315 hacluster 20 0 73892 2652 1952 S 0.0 0.3 0:13.25
> >> /usr/lib/pacemaker/pengine
> >>> 1252 root 20 0 33000 712 456 S 0.0 0.1 0:13.03 ha_logd: write
> process
> >>> 1835 ntp 20 0 27216 1980 1408 S 0.0 0.2 0:11.80 /usr/sbin/ntpd -p
> >> /var/run/ntpd.pid -g -u 105:112
> >>> 899 root 20 0 19168 700 488 S 0.0 0.1 0:09.75 /usr/sbin/irqbalance
> >>> 1642 root 20 0 30696 1556 912 S 0.0 0.2 0:06.49 /usr/bin/monit -c
> >> /etc/monit/monitrc
> >>> 4374 kamailio 20 0 291M 7272 2188 S 0.0 0.7 0:02.77
> >> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
> >>> 3079 root 0 -20 16864 4592 3508 S 0.0 0.5 0:01.51 /usr/bin/atop -a -
> w
> >> /var/log/atop/atop_20140306 6
> >>> 445 syslog 20 0 249M 6276 976 S 0.0 0.6 0:01.16 rsyslogd
> >>> 4373 kamailio 20 0 291M 7492 2396 S 0.0 0.7 0:01.03
> >> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
> >>> 1 root 20 0 33376 2632 1404 S 0.0 0.3 0:00.63 /sbin/init
> >>> 453 syslog 20 0 249M 6276 976 S 0.0 0.6 0:00.63 rsyslogd
> >>> 451 syslog 20 0 249M 6276 976 S 0.0 0.6 0:00.53 rsyslogd
> >>> 4379 kamailio 20 0 291M 6224 1132 S 0.0 0.6 0:00.38
> >> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
> >>> 4380 kamailio 20 0 291M 8516 3084 S 0.0 0.8 0:00.38
> >> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
> >>> 4381 kamailio 20 0 291M 8252 2828 S 0.0 0.8 0:00.37
> >> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
> >>> 23315 root 20 0 24872 2476 1412 R 0.7 0.2 0:00.37 htop
> >>> 4367 kamailio 20 0 291M 10000 4864 S 0.0 1.0 0:00.36
> >> /usr/local/sbin/kamailio -f /etc/kamailio/kamaili
> >>>
> >>>
> >>> My questions:
> >>> - Is this a cororync or pacameker issue?
> >>> - What are the CPG messages? Is it possible that we have a firewall
> issue?
> >>>
> >>>
> >>> Any hints would be great!
> >>>
> >>> Thanks,
> >>> Attila
> >>> _______________________________________________
> >>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> >>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >>>
> >>> Project Home: http://www.clusterlabs.org Getting started:
> >>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> >>> Bugs: http://bugs.clusterlabs.org
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
More information about the Pacemaker
mailing list