[Pacemaker] failure handling on a cloned resource
Johan Huysmans
johan.huysmans at inuits.be
Wed May 15 14:45:55 UTC 2013
Hi Andrew,
Thx!
I tested your github pacemaker repository by building an rpm from it and
installing it on my testsetup.
Before I could build the rpm I had to change 2 things in the GNUmakefile:
* --without=doc should be --without doc
* --target i686 was missing
If I didn't make these modification the rpmbuild command failed (on CentOS6)
I performed the test which failed before and everything seems OK.
Once the failing resource was restored the depending resources were
automatically started.
Thanks for this fast fix!
I which release can I expect this fix? and when is it planned?
I will currently use the head build I created. This is ok for my testsetup
but I don't want to run this version in production
Greetings,
Johan Huysmans
On 2013-05-10 06:55, Andrew Beekhof wrote:
> Fixed!
>
> https://github.com/beekhof/pacemaker/commit/d87de1b
>
> On 10/05/2013, at 11:59 AM, Andrew Beekhof <andrew at beekhof.net> wrote:
>
>> On 07/05/2013, at 5:15 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>>
>>> Hi,
>>>
>>> I only keep a couple of pe-input file, and that pe-inpurt-1 version was already overwritten.
>>> I redid my tests as describe in my previous mails.
>>>
>>> At the end of the test it was again written to pe-input1, which is included as attachment.
>> Perfect.
>> Basically the PE doesn't know how to correctly recognise that d_tomcat_monitor_15000 needs to be processed after d_tomcat_last_failure_0:
>>
>> <lrm_rsc_op id="d_tomcat_monitor_15000" operation_key="d_tomcat_monitor_15000" operation="monitor" crm-debug-origin="do_update_resource" crm_feature_set="3.0.7" transition-key="18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" transition-magic="0:0;18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" call-id="44" rc-code="0" op-status="0" interval="15000" last-rc-change="1367910303" exec-time="0" queue-time="0" op-digest="0c738dfc69f09a62b7ebf32344fddcf6"/>
>> <lrm_rsc_op id="d_tomcat_last_failure_0" operation_key="d_tomcat_monitor_15000" operation="monitor" crm-debug-origin="do_update_resource" crm_feature_set="3.0.7" transition-key="18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" transition-magic="0:1;18:360:0:ade789ed-b68e-4f0d-9092-684d0aaa0e89" call-id="44" rc-code="1" op-status="0" interval="15000" last-rc-change="1367909258" exec-time="0" queue-time="0" op-digest="0c738dfc69f09a62b7ebf32344fddcf6"/>
>>
>> which would allow it to recognise that the resource is healthy one again.
>>
>> I'll see what I can do...
>>
>>> gr.
>>> Johan
>>>
>>> On 2013-05-07 04:08, Andrew Beekhof wrote:
>>>> I have a much clearer idea of the problem you're seeing now, thankyou.
>>>>
>>>> Could you attach /var/lib/pacemaker/pengine/pe-input-1.bz2 from CSE-1 ?
>>>>
>>>> On 03/05/2013, at 10:40 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> Below you can see my setup and my test, this shows that my cloned resource with on-fail=block does not recover automatically.
>>>>>
>>>>> My Setup:
>>>>>
>>>>> # rpm -aq | grep -i pacemaker
>>>>> pacemaker-libs-1.1.9-1512.el6.i686
>>>>> pacemaker-cluster-libs-1.1.9-1512.el6.i686
>>>>> pacemaker-cli-1.1.9-1512.el6.i686
>>>>> pacemaker-1.1.9-1512.el6.i686
>>>>>
>>>>> # crm configure show
>>>>> node CSE-1
>>>>> node CSE-2
>>>>> primitive d_tomcat ocf:ntc:tomcat \
>>>>> op monitor interval="15s" timeout="510s" on-fail="block" \
>>>>> op start interval="0" timeout="510s" \
>>>>> params instance_name="NMS" monitor_use_ssl="no" monitor_urls="/cse/health" monitor_timeout="120" \
>>>>> meta migration-threshold="1"
>>>>> primitive ip_11 ocf:heartbeat:IPaddr2 \
>>>>> op monitor interval="10s" \
>>>>> params broadcast="172.16.11.31" ip="172.16.11.31" nic="bond0.111" iflabel="ha" \
>>>>> meta migration-threshold="1" failure-timeout="10"
>>>>> primitive ip_19 ocf:heartbeat:IPaddr2 \
>>>>> op monitor interval="10s" \
>>>>> params broadcast="172.18.19.31" ip="172.18.19.31" nic="bond0.119" iflabel="ha" \
>>>>> meta migration-threshold="1" failure-timeout="10"
>>>>> group svc-cse ip_19 ip_11
>>>>> clone cl_tomcat d_tomcat
>>>>> colocation colo_tomcat inf: svc-cse cl_tomcat
>>>>> order order_tomcat inf: cl_tomcat svc-cse
>>>>> property $id="cib-bootstrap-options" \
>>>>> dc-version="1.1.9-1512.el6-2a917dd" \
>>>>> cluster-infrastructure="cman" \
>>>>> pe-warn-series-max="9" \
>>>>> no-quorum-policy="ignore" \
>>>>> stonith-enabled="false" \
>>>>> pe-input-series-max="9" \
>>>>> pe-error-series-max="9" \
>>>>> last-lrm-refresh="1367582088"
>>>>>
>>>>> Currently only 1 node is available, CSE-1.
>>>>>
>>>>>
>>>>> This is how I am currently testing my setup:
>>>>>
>>>>> => Starting point: Everything up and running
>>>>>
>>>>> # crm resource status
>>>>> Resource Group: svc-cse
>>>>> ip_19 (ocf::heartbeat:IPaddr2): Started
>>>>> ip_11 (ocf::heartbeat:IPaddr2): Started
>>>>> Clone Set: cl_tomcat [d_tomcat]
>>>>> Started: [ CSE-1 ]
>>>>> Stopped: [ d_tomcat:1 ]
>>>>>
>>>>> => Causing failure: Change system so tomcat is running but has a failure (in attachment step_2.log)
>>>>>
>>>>> # crm resource status
>>>>> Resource Group: svc-cse
>>>>> ip_19 (ocf::heartbeat:IPaddr2): Stopped
>>>>> ip_11 (ocf::heartbeat:IPaddr2): Stopped
>>>>> Clone Set: cl_tomcat [d_tomcat]
>>>>> d_tomcat:0 (ocf::ntc:tomcat): Started (unmanaged) FAILED
>>>>> Stopped: [ d_tomcat:1 ]
>>>>>
>>>>> => Fixing failure: Revert system so tomcat is running without failure (in attachment step_3.log)
>>>>>
>>>>> # crm resource status
>>>>> Resource Group: svc-cse
>>>>> ip_19 (ocf::heartbeat:IPaddr2): Stopped
>>>>> ip_11 (ocf::heartbeat:IPaddr2): Stopped
>>>>> Clone Set: cl_tomcat [d_tomcat]
>>>>> d_tomcat:0 (ocf::ntc:tomcat): Started (unmanaged) FAILED
>>>>> Stopped: [ d_tomcat:1 ]
>>>>>
>>>>> As you can see in the logs the OCF script doesn't return any failure. This is noticed by pacemaker,
>>>>> however it doesn't reflect in crm_mon and it doesn't start the depending resources.
>>>>>
>>>>> Gr.
>>>>> Johan
>>>>>
>>>>> On 2013-05-03 03:04, Andrew Beekhof wrote:
>>>>>> On 02/05/2013, at 5:45 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>>>>>>
>>>>>>> On 2013-05-01 05:48, Andrew Beekhof wrote:
>>>>>>>> On 17/04/2013, at 9:54 PM, Johan Huysmans <johan.huysmans at inuits.be> wrote:
>>>>>>>>
>>>>>>>>> Hi All,
>>>>>>>>>
>>>>>>>>> I'm trying to setup a specific configuration in our cluster, however I'm struggling with my configuration.
>>>>>>>>>
>>>>>>>>> This is what I'm trying to achieve:
>>>>>>>>> On both nodes of the cluster a daemon must be running (tomcat).
>>>>>>>>> Some failover addresses are configured and must be running on the node with a correctly running tomcat.
>>>>>>>>>
>>>>>>>>> I have this achieved with a cloned tomcat resource and an collocation between the cloned tomcat and the failover addresses.
>>>>>>>>> When I cause a failure in the tomcat on the node running the failover addresses, the failover addresses will failover to the other node as expected.
>>>>>>>>> crm_mon shows that this tomcat has a failure.
>>>>>>>>> When I configure the tomcat resource with failure-timeout=0, the failure alarm in crm_mon isn't cleared whenever the tomcat failure is fixed.
>>>>>>>> All sounds right so far.
>>>>>>> If my broken tomcat is automatically fixed, I expect this to be noticed by pacemaker and that that node will be able to run my failover addresses,
>>>>>>> however I don't see this happening.
>>>>>> This is very hard to discuss without seeing logs.
>>>>>>
>>>>>> So you created a tomcat error, waited for pacemaker to notice, fixed the error and observed the pacemaker did not re-notice?
>>>>>> How long did you wait? More than the 15s repeat interval I assume? Did at least the resource agent notice?
>>>>>>
>>>>>>>>> When I configure the tomcat resource with failure-timeout=30, the failure alarm in crm_mon is cleared after 30seconds however the tomcat is still having a failure.
>>>>>>>> Can you define "still having a failure"?
>>>>>>>> You mean it still shows up in crm_mon?
>>>>>>>> Have you read this link?
>>>>>>>> http://clusterlabs.org/doc/en-US/Pacemaker/1.1-crmsh/html/Pacemaker_Explained/s-rules-recheck.html
>>>>>>> "Still having a failure" means that the tomcat is still broken and my OCF script reports it as a failure.
>>>>>>>>> What I expect is that pacemaker reports the failure as the failure exists and as long as it exists and that pacemaker reports that everything is ok once everything is back ok.
>>>>>>>>>
>>>>>>>>> Do I do something wrong with my configuration?
>>>>>>>>> Or how can I achieve my wanted setup?
>>>>>>>>>
>>>>>>>>> Here is my configuration:
>>>>>>>>>
>>>>>>>>> node CSE-1
>>>>>>>>> node CSE-2
>>>>>>>>> primitive d_tomcat ocf:custom:tomcat \
>>>>>>>>> op monitor interval="15s" timeout="510s" on-fail="block" \
>>>>>>>>> op start interval="0" timeout="510s" \
>>>>>>>>> params instance_name="NMS" monitor_use_ssl="no" monitor_urls="/cse/health" monitor_timeout="120" \
>>>>>>>>> meta migration-threshold="1" failure-timeout="0"
>>>>>>>>> primitive ip_1 ocf:heartbeat:IPaddr2 \
>>>>>>>>> op monitor interval="10s" \
>>>>>>>>> params nic="bond0" broadcast="10.1.1.1" iflabel="ha" ip="10.1.1.1"
>>>>>>>>> primitive ip_2 ocf:heartbeat:IPaddr2 \
>>>>>>>>> op monitor interval="10s" \
>>>>>>>>> params nic="bond0" broadcast="10.1.1.2" iflabel="ha" ip="10.1.1.2"
>>>>>>>>> group svc-cse ip_1 ip_2
>>>>>>>>> clone cl_tomcat d_tomcat
>>>>>>>>> colocation colo_tomcat inf: svc-cse cl_tomcat
>>>>>>>>> order order_tomcat inf: cl_tomcat svc-cse
>>>>>>>>> property $id="cib-bootstrap-options" \
>>>>>>>>> dc-version="1.1.8-7.el6-394e906" \
>>>>>>>>> cluster-infrastructure="cman" \
>>>>>>>>> no-quorum-policy="ignore" \
>>>>>>>>> stonith-enabled="false"
>>>>>>>>>
>>>>>>>>> Thanks!
>>>>>>>>>
>>>>>>>>> Greetings,
>>>>>>>>> Johan Huysmans
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>>>>>
>>>>>>>>> Project Home: http://www.clusterlabs.org
>>>>>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>>>>>> Bugs: http://bugs.clusterlabs.org
>>>>>>>> _______________________________________________
>>>>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>>>>
>>>>>>>> Project Home: http://www.clusterlabs.org
>>>>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>>>>> Bugs: http://bugs.clusterlabs.org
>>>>>>> _______________________________________________
>>>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>>>
>>>>>>> Project Home: http://www.clusterlabs.org
>>>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>>>> Bugs: http://bugs.clusterlabs.org
>>>>>> _______________________________________________
>>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>>
>>>>>> Project Home: http://www.clusterlabs.org
>>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>>> Bugs: http://bugs.clusterlabs.org
>>>>> <step_2.log><step_3.log>_______________________________________________
>>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>
>>>>> Project Home: http://www.clusterlabs.org
>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>> Bugs: http://bugs.clusterlabs.org
>>>> _______________________________________________
>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>
>>>> Project Home: http://www.clusterlabs.org
>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>> Bugs: http://bugs.clusterlabs.org
>>> <pe-input-1.bz2>_______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org
>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
More information about the Pacemaker
mailing list