[Pacemaker] Trouble with DRBD mount
Jake Smith
jsmith at argotec.com
Fri Mar 1 18:12:03 UTC 2013
----- Original Message -----
> From: senrabdet at aol.com
> To: jsmith at argotec.com, pacemaker at oss.clusterlabs.org
> Sent: Friday, March 1, 2013 1:09:13 PM
> Subject: Re: [Pacemaker] Trouble with DRBD mount
> Thanks Jake - trying that, getting one problem when try the colo
> cation statement .
> We try ( should be one " l" in colocation, right?):
Works with one or two ells in it ;-)
> colocation fs_with_drbd inf: fs_vservers drbd:Master
> ...and get:
> crm_verify[2599]: 2013/03/01_12:59:30 ERROR:
> unpack_simple_colocation: No resource (con=fs_with_drbd, rsc=drbd)
ack mistake on my part - should be the drbd master/slave resource name = ms_drbd.
colocation fs_with_drbd inf: fs_vservers ms_drbd:Master
> Should we define some sort of group for the collocation statement? Or
> define a "fs_with _drbd resource?
> Thanks...think you've got us on the right track - another post had
> suggested we didn't need the colocation and order statements...
> Ted
> > collocation fs_with_drbd inf: fs_vservers drbd:Master
>
> -----Original Message-----
> From: Jake Smith <jsmith at argotec.com>
> To: The Pacemaker cluster resource manager
> <pacemaker at oss.clusterlabs.org>
> Sent: Fri, Mar 1, 2013 12:16 pm
> Subject: Re: [Pacemaker] Trouble with DRBD mount
> ----- Original Message -----
> > From: senrabdet at aol.com > To: pacemaker at oss.clusterlabs.org > Sent:
> > Friday, March 1, 2013 11:40:53 AM
> > Subject: Re: [Pacemaker] Trouble with DRBD mount
> >
> >
> > Hi Andreas:
> >
> > Thanks so much for the response! - is it OK to write you back? New
> > to
> > the forum so am unsure of protocol...apologize if we should have
> > posted this directly.
> >
> > Per your suggestions, w e made the following adjustments but are
> > still stuck:
> >
> > - set the LVM.conf filter back to what it had been (filter = [
> > "a/.*/" ]) and cleared the LVM cache
> > - adjusted our pacemaker config to the following (we tried adding
> > some "start-delay" statements, but get the same results with or
> > without them):
> >
> > a) crm configure show
> > node server1
> > node server2
> > primitive app_ip ocf:heartbeat:IPaddr \
> > params ip="192.168.1.152" \
> > op monitor interval="30s"
> > primitive drbd ocf:linbit:drbd \
> > params drbd_resource="r1" \
> > op start interval="0" timeout="240" \
> > op stop interval="0" timeout="100" \
> > op monitor interval="59s" role="Master" timeout="30s"
> > start-delay="1m" \
> > op monitor interval="60s" role="Slave" timeout="30s"
> > start-delay="1m"
> > primitive fs_vservers ocf:heartbeat:Filesystem \
> > params device="/dev/vg2/vserverLV" directory="/vservers"
> > fstype="ext4" \
> > op start interval="0" timeout="60" \
> > op stop interval="0" timeout="120" \
> > meta target-role="Started"
> ^^^^ fs_vservers should mount the drbd resource not the underlying lv
> primitive fs_vservers ocf:heartbeat:Filesystem \
> params device="/dev/drbd/by-res/r1" directory="/vservers"
> fstype="ext4" \
> op start interval="0" timeout="60" \
> op stop interval="0" timeout="120" \
> meta target-role="Started"
> > ms ms_drbd drbd \
> > meta master-node-max="1" clone-max="2" clone-node-max="1"
> > globally-unique="false" notify="true" target-role="Started"
> > location cli-prefer-app_ip app_ip \
> > rule $id="cli-prefer-rule-app_ip" inf: #uname eq server2
> Do you really want the app_ip to never migrate to server1?
> > location drbd_on_node1 ms_drbd \
> > rule $id="drbd_on_node1-rule" $role="master" 100: #uname eq server1
> You also need a colocation and order statement to make sure the fs
> starts after
> the drbd resource is promoted to master and on the same node as the
> drbd master:
> order drbd_then_fs inf: ms_drbd:promote fs_vservers:start
> collocation fs_with_drbd inf: fs_vservers drbd:Master
> HTH
> Jake
> > property $id="cib-bootstrap-options" \
> > dc-version="1.0.9-74392a28b7f31d7ddc86689598bd23114f58978b" \
> > cluster-infrastructure="openais" \
> > expected-quorum-votes="2" \
> > stonith-enabled="false" \
> > no-quorum-policy="ignore"
> >
> >
> >
> >
> >
> > b) Our drbd.conf is:
> >
> > global { usage-count no; }
> > common { syncer { rate 100M; } }
> > #original
> > resource r1 {
> > protocol C;
> > startup {
> > wfc-timeout 15;
> > degr-wfc-timeout 60;
> > }
> > device /dev/drbd1 minor 1;
> > disk /dev/vg2/vserverLV;
> > meta-disk internal;
> >
> > # following 2 definition are equivalent
> > on server1 {
> > address 192.168.1.129:7801;
> > disk /dev/vg2/vserverLV;
> > }
> > on server2 {
> > address 192.168.1.128:7801;
> > disk /dev/vg2/vserverLV;
> > }
> >
> > # floating 192.168.5.41:7801;
> > # floating 192.168.5.42:7801;
> > net {
> > cram-hmac-alg sha1;
> > shared-secret "secret";
> > after-sb-0pri discard-younger-primary; #discard-zero-changes;
> > after-sb-1pri discard-secondary;
> > after-sb-2pri call-pri-lost-after-sb;
> > }
> > }
> > c) A few times, the "fs_vservers" seems to have started, but
> > generally after a reboot we get:
> >
> > Last updated: Fri Mar 1 11:07:48 2013
> > Stack: openais
> > Current DC: server1 - partition with quorum
> > Version: 1.0.9-74392a28b7f31d7ddc86689598bd23114f58978b
> > 2 Nodes configured, 2 expected votes
> > 3 Resources configured.
> > ============
> >
> > Online: [ server2 server1 ]
> >
> > app_ip (ocf::heartbeat:IPaddr): Started server2
> > Master/Slave Set: ms_drbd
> > Masters: [ server1 ]
> > Slaves: [ server2 ]
> >
> > Failed actions:
> > fs_vservers_start_0 (node=server2, call=5, rc=1, status=complete):
> > unknown error
> > fs_vservers_start_0 (node=server1, call=8, rc=1, status=complete):
> > unknown error
> >
> >
> > Our understanding from your last note is we want our LVM to start
> > on
> > it's own, and start before DRBD. We don't see it doing so in the
> > boot posts we can see (ctrl-alt-f1), but do see it after boot if we
> > do "lvdisplay". We can "mount /dev/drbd1 /vservers" by hand, but
> > assume that is a symptom not a solution. Likewi s e, we have to
> > comment out the LVM statement in fstab (#/dev/drbd1 /vservers ext4
> > defaults 0 2) as we can't boot with it un-commented without getting
> > a "Control D" situation.
> >
> > Any thoughts would be great! Thanks,
> >
> > Ted
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Andreas Kurz < andreas at hastexo.com >
> > To: pacemaker < pacemaker at oss.clusterlabs.org >
> > Sent: Thu, Feb 28, 2013 6:15 pm
> > Subject: Re: [Pacemaker] Trouble with DRBD mount
> >
> >
> > On 2013-02-28 13:19, senrabdet at aol.com wrote:
> > > Hi All:
> > >
> > > We are stuck trying to get pacemaker to work with DRBD, and
> > > having
> > > tried
> > > various alternatives can't get our "drbd1" to mount and get some
> > > errors.
> > >
> > > NOTE: we are trying to get pacemaker to work with an existing
> > > Encrypted
> > > RAID1 LVM setup - is this impossible or a "just plain bad idea"?
> > > We
> > > were thinking we'd like the potential advantages of local RAID on
> > > each
> > > box as well as the Internet RAID & failover provided by
> > > DRBD/pacemaker.
> > > We're using Debian Squeeze. Per various instructions, we've
> > > disabled
> > > the DRBD boot init (update-rc.d -f drbd remove) and set the LVM
> > > filter
> > > to filter = [ "a|drbd.*|", "r|.*|" ].
> >
> > so you only allow scanning for LVM signatures on DRBD ... that
> > needs
> > to
> > be in Primary mode before ....
> >
> > >
> > > FYI - we've commented out the LVM mount "/dev/vg2/vserverLV" in
> > > our
> > > fstab, and consistently seem to need to do this to avoid a boot
> > > error.
> > >
> > > We think DRBD works until we add in the pacemaker steps (i.e.,
> > > "dev/drbd1" mounts at boot; we can move related data from server1
> > > to
> > > server2 back and forth, though need to use the command line to
> > > accomplish this). We've seen various statements on the net that
> > > suggest
> > > it is viable to use a "mapper" disk choice in drbd.conf. Also,
> > > if
> > > we
> > > start by configuring Pacemaker for a simple IP failover, that
> > > works
> > > (i.e., no errors, we can ping via the fail over address) but
> > > stops
> > > working when we add in the DRBD primatives and related
> > > statements.
> > > Our
> > > suspicion (other than maybe "you can't do this with existing
> > > RAID")
> > > is
> > > that we're using the wrong "disk" statement in our drbd.conf or
> > > maybe in
> > > our "primitive fs_vservers" statement, though we've tried lots of
> > > alternatives and this is the same drbd.conf we use before adding
> > > in
> > > Pacemaker and it seems to work at that point.
> > >
> > > Lastly, while various config statements refer to "vservers", we
> > > have not
> > > gotten to the point of trying to add any data to the DRBD devices
> > > other
> > > than a few text files that have disappeared since doing our "crm"
> > > work.
> > >
> > > Any help appreciated! Thanks, Ted
> > >
> > > CONFIGS/LOGS
> > >
> > > A) drbd.conf
> > >
> > > global { usage-count no; }
> > > common { syncer { rate 100M; } }
> > > #original
> > > resource r1 {
> > > protocol C;
> > > startup {
> > > wfc-timeout 15;
> > > degr-wfc-timeout 60;
> > > }
> > > device /dev/drbd1 minor 1;
> > > disk /dev/vg2/vserverLV;
> >
> > so vg2/vserverLV is the lower-level device for DRBD, simply let vg2
> > be
> > automatically activated and forget that LVM filter thing you did,
> > that
> > is only needed for vgs sitting _on_ DRBD, not below.
> >
> > > meta-disk internal;
> > >
> > > # following 2 definition are equivalent
> > > on server1 {
> > > address 192.168.1.129:7801;
> > > disk /dev/vg2/vserverLV;
> > > }
> > > on server2 {
> > > address 192.168.1.128:7801;
> > > disk /dev/vg2/vserverLV;
> > > #disk /dev/mapper/md2_crypt;
> > > }
> > >
> > > # floating 192.168.5.41:7801;
> > > # floating 192.168.5.42:7801;
> > > net {
> > > cram-hmac-alg sha1;
> > > shared-secret "secret";
> > > after-sb-0pri discard-younger-primary;
> > > #discard-zero-changes;
> > > after-sb-1pri discard-secondary;
> > > after-sb-2pri call-pri-lost-after-sb;
> > > }
> > > }
> > >
> > >
> > > B) Pacemaker Config
> > >
> > > crm configure show
> > > node server1
> > > node server2
> > > primitive app_ip ocf:heartbeat:IPaddr \
> > > params ip="192.168.1.152" \
> > > op monitor interval="30s"
> > > primitive drbd ocf:linbit:drbd \
> > > params drbd_resource="r1" \
> > > op start interval="0" timeout="240" \
> > > op stop interval="0" timeout="100" \
> > > op monitor interval="59s" role="Master" timeout="30s" \
> > > op monitor interval="60s" role="Slave" timeout="30s"
> > > primitive fs_vservers ocf:heartbeat:Filesystem \
> > > par ams device="/dev/drbd1" directory="/vservers" fstype="ext4" \
> > > op start interval="0" timeout="60" \
> > > op stop interval="0" timeout="120"
> > > primitive vg2 ocf:heartbeat:LVM \
> > > params volgrpname="vg2" exclusive="true" \
> >
> > simply remove all that LVM things from your pacemaker configura
> > tion
> >
> > > op start interval="0" timeout="30" \
> > > op stop interval="0" timeout="30"
> > > group lvm app_ip vg2 fs_vservers
> >
> > ouch .. a group called "lvm", am I the only one who thinks this is
> > confusing?
> >
> > > ms ms_drbd drbd \
> > > meta master-node-max="1" clone-max="2" clone-node-max="1"
> > > globally-unique="false" notify="true" target-role="Master"
> > > location drbd_on_node1 ms_drbd \
> > > rule $id="drbd_on_node1-rule" $role="master" 100: #uname eq
> > > server1
> > > colocation vserver-deps inf: ms_drbd:Master lvm
> >
> > wrong direction .. you want the group follow the DRBD master
> >
> > Regards,
> > Andreas
> >
> > --
> > Need help with Pacemaker? http://www.hastexo.com/now > order
> > app_on_drbd inf: ms_drbd:promote lvm:start
> > > property $id="cib-bootstrap-options" \
> > > dc-version="1.0.9-74392a28b7f31d7ddc86689598bd23114f58978b" \
> > > cluster-infrastructure="openais" \
> > > expected-quorum-votes="2" \
> > > stonith-enabled="false" \
> > > no-quorum-policy="ignore"
> > >
> > >
> > >
> > > C) crm status results (with errors)
> > > Last updated: Wed Feb 27 19:05:57 2013
> > > Stack: openais
> > > Current DC: server1 - partition with quorum
> > > Version: 1.0.9-74392a28b7f31d7ddc86689598bd23114f58978b
> > > 2 Nodes configured, 2 expected votes
> > > 2 Resources configured.
> > > ============
> > >
> > > Online: [ server2 server1 ]
> > >
> > >
> > > Migration summary:
> > > * Node server2:
> > > drbd:1: migration-threshold=1000000 fail-count=1000000
> > > * Node server1:
> > > drbd:0: migration-threshold=1000000 fail-count=1000000
> > >
> > > Failed actions:
> > > drbd:1_start_0 (node=server2, call=8, rc=-2, status=Timed
> > > Out):
> > > unknown exec error
> > > drbd:0_start_0 (node=server1, call=6, rc=-2, status=Timed
> > > Out):
> > > unknown exec error
> > >
> > > D) Mount
> > >
> > > /dev/mapper/vg1-root on / type ext4 (rw,errors=remount-ro)
> > > tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
> > > proc on /proc type proc (rw,noexec,nosuid,nodev)
> > > sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
> > > udev on /dev type tmpfs (rw,mode=0755)
> > > tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
> > > devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
> > > /dev/md0 on /boot type ext4 (rw)
> > > /dev/mapper/vg1-home on /home type ext4 (rw)
> > > /dev/mapper/vg1-tmp on /tmp type ext4 (rw)
> > > /dev/mapper/vg1-usr on /usr type ext4 (rw)
> > > /dev/mapper/vg1-var on /var type ext4 (rw)
> > > fusectl on /sys/fs/fuse/connections type fusectl (rw)
> > >
> > >
> > > E) fstab
> > >
> > > # /etc/fstab: static file system information.
> > > #
> > > # Use 'blkid' to print the universally unique identifier for a
> > > # device; this may be used with UUID= as a more robust way to
> > > name
> > > devices
> > > # that works even if disks are added and removed. See fstab(5).
> > > #
> > > # <file system> <mount point> <type> <options> <dump>
> > > <pass>
> > > proc /proc proc defaults 0 0
> > > /dev/mapper/vg1-root / ext4 errors=remount-ro 0
> > > 1
> > > # /boot was on /dev/md0 during installation
> > > UUID=25829c6c-164c-4a1e-9e84-6bab180e38f4 /boot ext4
> > > defaults 0 2
> > > /dev/mapper/vg1-home /home ext4 defaults 0
> > > 2
> > > /dev/mapper/vg1-tmp /tmp ext4 defaults 0
> > > 2
> > > /dev/mapper/vg1-usr /usr ext4 defaults 0
> > > 2
> > > /dev/mapper/vg1-var /var ext4 defaults 0
> > > 2
> > > #/dev/mapper/vg2-vserverLV /vservers ext4 defaults
> > > 0 2
> > > /dev/mapper/vg1-swap none swap sw 0
> > > 0
> > > /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0
> > > 0
> > > /dev/scd1 /media/cdrom1 udf,iso9660 user,noauto 0
> > > 0
> > > /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
> > >
> > >
> > > F) fdisk -l
> > >
> > > Disk /dev/sda: 160.0 GB, 160041885696 bytes
> > > 255 heads, 63 sectors/track, 19457 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x0007c7a2
> > >
> > > Device Boot Start End Blocks Id System
> > > /dev/sda1 * 1 61 487424 fd Linux
> > > raid
> > > autodetect
> > > Partition 1 does not end on cylinder boundary.
> > > /dev/sda2 61 1885 14648320 fd Linux
> > > raid
> > > autodetect
> > > /dev/sda3 1885 3101 9765888 fd Linux
> > > raid
> > > autodetect
> > >
> > > Disk /dev/sdb: 203.9 GB, 203928109056 bytes
> > > 255 heads, 63 sectors/track, 24792 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x0008843c
> > >
> > > Device Boot Start End Blocks Id System
> > > /dev/sdb1 * 1 61 487424 fd Linux
> > > raid
> > > autodetect
> > > Partition 1 does not end on cyli nder boundary.
> > > /dev/sdb2 61 1885 14648320 fd Linux
> > > raid
> > > autodetect
> > > /dev/sdb3 1885 3101 9765888 fd Linux
> > > raid
> > > autodetect
> > >
> > > Disk /dev/md0: 499 MB, 499109888 bytes
> > > 2 heads, 4 sectors/track, 121853 cylinders
> > > Units = cylinders of 8 * 512 = 4096 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/md1: 15.0 GB, 14998757376 bytes
> > > 2 heads, 4 sectors/track, 3661806 cylinders
> > > Units = cylinders of 8 * 512 = 4096 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x08040000
> > >
> > >
> > > Disk /dev/md2: 9999 MB, 9999147008 bytes
> > > 2 heads, 4 sectors/track, 2441198 cylinders
> > > Units = cylinders of 8 * 512 = 4096 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x08040000
> > >
> > >
> > > Disk /dev/dm-0: 15.0 GB, 14997704704 bytes
> > > 255 heads, 63 sectors/track, 1823 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-1: 3997 MB, 3997171712 bytes
> > > 255 heads, 63 sectors/track, 485 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-2: 1996 MB, 1996488704 bytes
> > > 255 heads, 63 sectors/track, 242 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-3: 1996 MB, 1996488704 bytes
> > > 255 heads, 63 sectors/track, 242 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-4: 3997 MB, 3997171712 bytes
> > > 255 heads, 63 sectors/track, 485 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-5: 1996 MB, 1996488704 bytes
> > > 255 heads, 63 sectors/track, 242 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-6: 499 MB, 499122176 bytes
> > > 255 heads, 63 sectors/track, 60 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > >
> > > Disk /dev/dm-7: 9998 MB, 9998094336 bytes
> > > 255 heads, 63 sectors/track, 1215 cylinders
> > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > Sector size (logical/physical): 512 bytes / 512 bytes
> > > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > > Disk identifier: 0x00000000
> > >
> > > G) syslog excerpt
> > >
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) Command '
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) drbdsetup
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p _drbd_r1:0:start:stderr) 1
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) disk
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) /dev/vg2/vserverLV
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA out put:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) /dev/vg2/vserverLV
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) internal
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) --set-defaults
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) --create-device
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) ' terminated with exit code 20
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) drbdadm attach r1: exited with code 20
> > > Feb 27 06:36:22 server1 drbd[2329]: ERROR: r1: Called drbdadm -c
> > > /etc/drbd.conf --peer server2 up r1
> > > Feb 27 06:36:22 server1 drbd[2329]: ERROR: r1: Exit code 1
> > > Feb 27 06:36:22 server1 drbd[2329]: ERROR: r1: Command output:
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stdout)
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) Can not open device
> > > '/dev/vg2/vserverLV': No
> > > such file or directory
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) Command 'drbdsetup 1 disk
> > > /dev/vg2/vserverLV
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) /dev/vg2/vserverLV internal
> > > --set-defaults
> > > --create-device' terminated with exit code 20#012drbdadm attach
> > > r1:
> > > exited with code 20
> > > Feb 27 06:36:22 server1 drbd[2329]: ERROR: r1: Called drbdadm -c
> > > /etc/drbd.conf --peer server2 up r1
> > > Feb 27 06:36:22 server1 drbd[2329]: ERROR: r1: Exit code 1
> > > Feb 27 06:36:22 server1 drbd[2329]: ERROR: r1: Command output:
> > > Feb 27 06:36:22 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stdout)
> > > Feb 27 06:36:23 server1 lrmd: [1705]: info: RA output:
> > > (p_drbd_r1:0:start:stderr) Can not open device
> > > '/dev/vg2/vserverLV': No
> > > such file or directory
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org >
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker >
> > > Project Home: http://www.clusterlabs.org > Getting started:
> > > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf > Bugs:
> > > http://bugs.clusterlabs.org >
> >
> >
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org >
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker Project
> > Home:
> > http://www.clusterlabs.org Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs:
> > http://bugs.clusterlabs.org >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org >
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker >
> > Project Home: http://www.clusterlabs.org > Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf > Bugs:
> > http://bugs.clusterlabs.org >
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker Project Home:
> http://www.clusterlabs.org Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs:
> http://bugs.clusterlabs.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20130301/b023e0a4/attachment.htm>
More information about the Pacemaker
mailing list