[Pacemaker] fence_xvm / fence_virtd problem
Digimer
lists at alteeve.ca
Sun Jun 16 03:19:00 UTC 2013
Tried allowing everything into the host from the bridge. No luck...
Tried with;
iptables -I INPUT -i virbr0 -j ACCEPT
new rules;
====
# Generated by iptables-save v1.4.16.2 on Sat Jun 15 23:17:15 2013
*nat
:PREROUTING ACCEPT [397:94492]
:INPUT ACCEPT [34:7520]
:OUTPUT ACCEPT [709:61932]
:POSTROUTING ACCEPT [681:59876]
-A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p tcp -j
MASQUERADE --to-ports 1024-65535
-A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p udp -j
MASQUERADE --to-ports 1024-65535
-A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -j MASQUERADE
COMMIT
# Completed on Sat Jun 15 23:17:15 2013
# Generated by iptables-save v1.4.16.2 on Sat Jun 15 23:17:15 2013
*mangle
:PREROUTING ACCEPT [52594:46854362]
:INPUT ACCEPT [38456:45153011]
:FORWARD ACCEPT [13667:1595902]
:OUTPUT ACCEPT [28298:2665665]
:POSTROUTING ACCEPT [42095:4288350]
-A POSTROUTING -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM
--checksum-fill
COMMIT
# Completed on Sat Jun 15 23:17:15 2013
# Generated by iptables-save v1.4.16.2 on Sat Jun 15 23:17:15 2013
*filter
:INPUT ACCEPT [69:8423]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [130:12757]
-A INPUT -i virbr0 -j ACCEPT
-A INPUT -i virbr0 -p udp -m udp --dport 53 -j ACCEPT
-A INPUT -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT
-A INPUT -i virbr0 -p udp -m udp --dport 67 -j ACCEPT
-A INPUT -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT
-A FORWARD -d 192.168.122.0/24 -o virbr0 -m conntrack --ctstate
RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.122.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
COMMIT
# Completed on Sat Jun 15 23:17:15 2013
====
On 06/15/2013 06:04 PM, Vladislav Bogdanov wrote:
> 15.06.2013 20:26, Digimer wrote:
>> Ah, I think it's a problem with the firewall rules on the host. Not sure
>> how to fix it though...
>
> You probably need to open port 1229/tcp in filter INPUT on virtual
> cluster members. That is where fence_xvm listens for a connection from
> fence_virtd after it sends multicast request iirc. Design deficiency,
> fence_xvm works only one copy on a system at a time, it listens for tcp
> connection on a predefined port.
>
>>
>> lemass:/home/digimer# iptables-save
>> # Generated by iptables-save v1.4.16.2 on Sat Jun 15 13:26:33 2013
>> *nat
>> :PREROUTING ACCEPT [246583:89552160]
>> :INPUT ACCEPT [2335:362026]
>> :OUTPUT ACCEPT [11740:741351]
>> :POSTROUTING ACCEPT [11706:738225]
>> -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p tcp -j
>> MASQUERADE --to-ports 1024-65535
>> -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -p udp -j
>> MASQUERADE --to-ports 1024-65535
>> -A POSTROUTING -s 192.168.122.0/24 ! -d 192.168.122.0/24 -j MASQUERADE
>> COMMIT
>> # Completed on Sat Jun 15 13:26:33 2013
>> # Generated by iptables-save v1.4.16.2 on Sat Jun 15 13:26:33 2013
>> *mangle
>> :PREROUTING ACCEPT [3250861:2486027770]
>> :INPUT ACCEPT [2557761:1301267981]
>> :FORWARD ACCEPT [444644:1094901100]
>> :OUTPUT ACCEPT [1919457:2636518995]
>> :POSTROUTING ACCEPT [2364615:3731498365]
>> -A POSTROUTING -o virbr0 -p udp -m udp --dport 68 -j CHECKSUM
>> --checksum-fill
>> COMMIT
>> # Completed on Sat Jun 15 13:26:33 2013
>> # Generated by iptables-save v1.4.16.2 on Sat Jun 15 13:26:33 2013
>> *filter
>> :INPUT ACCEPT [2557761:1301267981]
>> :FORWARD ACCEPT [0:0]
>> :OUTPUT ACCEPT [1919457:2636518995]
>> -A INPUT -i virbr0 -p udp -m udp --dport 53 -j ACCEPT
>> -A INPUT -i virbr0 -p tcp -m tcp --dport 53 -j ACCEPT
>> -A INPUT -i virbr0 -p udp -m udp --dport 67 -j ACCEPT
>> -A INPUT -i virbr0 -p tcp -m tcp --dport 67 -j ACCEPT
>> -A FORWARD -d 192.168.122.0/24 -o virbr0 -m conntrack --ctstate
>> RELATED,ESTABLISHED -j ACCEPT
>> -A FORWARD -s 192.168.122.0/24 -i virbr0 -j ACCEPT
>> -A FORWARD -i virbr0 -o virbr0 -j ACCEPT
>> -A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
>> -A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
>> COMMIT
>> # Completed on Sat Jun 15 13:26:33 2013
>>
>> digimer
>>
>> On 06/15/2013 01:09 PM, Digimer wrote:
>>> Hi all,
>>>
>>> I'm trying to play with pacemaker on fedora 19 (pre-release) and I am
>>> having trouble getting the guests to talk to the host.
>>>
>>> From the host, I can run;
>>>
>>> lemass:/home/digimer# fence_xvm -o list
>>> pcmk1 83f6abdc-bb48-d794-4aca-13f091f32c8b on
>>> pcmk2 2d778455-de7d-a9fa-994c-69d7b079fda8 on
>>>
>>> I can fence the guests from the host as well. However, I can not get the
>>> list (or fence) from the quests;
>>>
>>> [root at pcmk1 ~]# fence_xvm -o list
>>> Timed out waiting for response
>>> Operation failed
>>>
>>> I suspect a multicast issue, but so far as I can tell, multicast is
>>> enabled on the bridge;
>>>
>>> lemass:/home/digimer# ifconfig
>>> virbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>>> inet 192.168.122.1 netmask 255.255.255.0 broadcast
>>> 192.168.122.255
>>> ether 52:54:00:da:90:a1 txqueuelen 0 (Ethernet)
>>> RX packets 103858 bytes 8514464 (8.1 MiB)
>>> RX errors 0 dropped 0 overruns 0 frame 0
>>> TX packets 151988 bytes 177742562 (169.5 MiB)
>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>
>>> vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>>> inet6 fe80::fc54:ff:feed:3701 prefixlen 64 scopeid 0x20<link>
>>> ether fe:54:00:ed:37:01 txqueuelen 500 (Ethernet)
>>> RX packets 212828 bytes 880551892 (839.7 MiB)
>>> RX errors 0 dropped 0 overruns 0 frame 0
>>> TX packets 225430 bytes 182955760 (174.4 MiB)
>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>
>>> vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>>> inet6 fe80::fc54:ff:fe45:e9ae prefixlen 64 scopeid 0x20<link>
>>> ether fe:54:00:45:e9:ae txqueuelen 500 (Ethernet)
>>> RX packets 4840 bytes 587902 (574.1 KiB)
>>> RX errors 0 dropped 0 overruns 0 frame 0
>>> TX packets 7495 bytes 899578 (878.4 KiB)
>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>
>>> I tried specifying the mcast address and port without success.
>>>
>>> The host's config is:
>>>
>>> lemass:/home/digimer# cat /etc/fence_virt.conf
>>> backends {
>>> libvirt {
>>> uri = "qemu:///system";
>>> }
>>>
>>> }
>>>
>>> listeners {
>>> multicast {
>>> port = "1229";
>>> family = "ipv4";
>>> interface = "virbr0";
>>> address = "239.192.214.190";
>>> key_file = "/etc/cluster/fence_xvm.key";
>>> }
>>>
>>> }
>>>
>>> fence_virtd {
>>> module_path = "/usr/lib64/fence-virt";
>>> backend = "libvirt";
>>> listener = "multicast";
>>> }
>>>
>>> The cluster forms and corosync is using multicast, so I am not sure if
>>> mcast really is the problem.
>>>
>>> Any tips/help?
>>>
>>> Thanks!
>>>
>>
>>
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
--
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without
access to education?
More information about the Pacemaker
mailing list