[Pacemaker] Postresql streaming replication support
Takatoshi MATSUO
matsuo.tak at gmail.com
Thu Jan 10 04:50:07 UTC 2013
Hi Keith
Do you want to start "ClusterIP" on Slave ?
It seems that ClusterIP is based on vip-slave of my sample configuration.
If you would like to start it on Master, you need to customize "vip-master".
And pgsql's master-ip parameter needs the IP of vip-master which
combines with vip-rep.
like this
----------------------------------------------------
property \
no-quorum-policy="ignore" \
stonith-enabled="false" \
crmd-transition-delay="0s"
rsc_defaults \
resource-stickiness="INFINITY" \
migration-threshold="1"
ms msPostgresql pgsql \
meta \
master-max="1" \
master-node-max="1" \
clone-max="2" \
clone-node-max="1" \
notify="true"
primitive ClusterIP ocf:heartbeat:IPaddr2 \
params \
ip="172.16.0.110" \
cidr_netmask="24" \
op start timeout="60s" interval="0s" on-fail="stop" \
op monitor timeout="60s" interval="10s" on-fail="restart" \
op stop timeout="60s" interval="0s" on-fail="block"
primitive pgsql ocf:heartbeat:pgsql \
params \
pgctl="/opt/PostgreSQL/9.2/bin/pg_ctl" \
psql="/opt/PostgreSQL/9.2/bin/psql" \
pgdata="/opt/PostgreSQL/9.2/data/" \
start_opt="-p 5432" \
rep_mode="sync" \
node_list="test-db1 test-db2" \
restore_command="cp /opt/PostgreSQL/9.2/data/archive/%f %p" \
primary_conninfo_opt="keepalives_idle=60 keepalives_interval=5
keepalives_count=5" \
master_ip="172.16.0.110" \
stop_escalate="0" \
op start timeout="60s" interval="0s" on-fail="restart" \
op monitor timeout="60s" interval="11s" on-fail="restart" \
op monitor timeout="60s" interval="10s" on-fail="restart" role="Master" \
op promote timeout="60s" interval="0s" on-fail="restart" \
op demote timeout="60s" interval="0s" on-fail="block" \
op stop timeout="60s" interval="0s" on-fail="block" \
op notify timeout="60s" interval="0s"
colocation rsc_colocation-1 inf: ClusterIP msPostgresql:Master
order rsc_order-1 0: msPostgresql:promote ClusterIP:start symmetrical=false
order rsc_order-2 0: msPostgresql:demote ClusterIP:stop symmetrical=false
----------------------------------------------------
Please see this to operate it.
https://github.com/t-matsuo/resource-agents/wiki/Operation-examples-for-none-shared-wal-archives-environment
--
Takatoshi
2013/1/10 Keith Ouellette <Keith.Ouellette at airgas.com>:
> Thank you. I wish I could have seen the presentation. In my case, the two nodes are in two different US cities connected by a bridged VPN. I do not have the ability to have separate connection for pacemaker, replication and access.
>
>
>
> I tried to scale the configuration back to support one VIP, Here is the XML output of what I tried, but the service does not even come up.
>
> <resources>
> <primitive class="ocf" id="ClusterIP" provider="heartbeat" type="IPaddr2">
> <meta_attributes id="ClusterIP-meta_attributes">
> <nvpair id="ClusterIP-meta_attributes-target-role" name="target-role" value="Started"/>
> </meta_attributes>
> <operations id="ClusterIP-operations">
> <op id="ClusterIP-op-monitor-10s" interval="10s" name="monitor" timeout="20s"/>
> </operations>
> <instance_attributes id="ClusterIP-instance_attributes">
> <nvpair id="ClusterIP-instance_attributes-ip" name="ip" value="172.16.0.110"/>
> <nvpair id="ClusterIP-instance_attributes-cidr_netmask" name="cidr_netmask" value="24"/>
> </instance_attributes>
> </primitive>
> <primitive class="ocf" id="pgsql" provider="heartbeat" type="pgsql">
> <meta_attributes id="pgsql-meta_attributes">
> <nvpair id="pgsql-meta_attributes-target-role" name="target-role" value="Started"/>
> </meta_attributes>
> <operations id="pgsql-operations">
> <op id="pgsql-op-start-0" interval="0" name="start" on-fail="restart" timeout="120"/>
> <op id="pgsql-op-monitor-7" interval="7" name="monitor" on-fail="restart" timeout="60"/>
> <op id="pgsql-op-monitor-Master-60" interval="60" name="monitor" on-fail="restart" role="Master" timeout="30"/>
> <op id="pgsql-op-promote-0" interval="0" name="promote" on-fail="restart" timeout="60"/>
> <op id="pgsql-op-stop-0" interval="0" name="stop" on-fail="block" timeout="60"/>
> <op id="pgsql-op-demote-0" interval="0" name="demote" on-fail="block" timeout="60"/>
> <op id="pgsql-op-notify-0" interval="0" name="notify" timeout="60"/>
> </operations>
> <instance_attributes id="pgsql-instance_attributes">
> <nvpair id="pgsql-instance_attributes-pgctl" name="pgctl" value="/opt/PostgreSQL/9.2/bin/pg_ctl"/>
> <nvpair id="pgsql-instance_attributes-psql" name="psql" value="/opt/PostgreSQL/9.2/bin/psql"/>
> <nvpair id="pgsql-instance_attributes-pgdata" name="pgdata" value="/opt/PostgreSQL/9.2/data/"/>
> <nvpair id="pgsql-instance_attributes-start_opt" name="start_opt" value="-p 5432"/>
> <nvpair id="pgsql-instance_attributes-rep_mode" name="rep_mode" value="sync"/>
> <nvpair id="pgsql-instance_attributes-node_list" name="node_list" value="test-db1 test-db2"/>
> <nvpair id="pgsql-instance_attributes-restore_command" name="restore_command" value="cp /opt/PostgreSQL/9.2/data/archive/%f %p"/>
> <nvpair id="pgsql-instance_attributes-primary_conninfo_opt" name="primary_conninfo_opt" value="keepalives_idle=60 keepalives_interval=5 keepalives_count=5"/>
> <nvpair id="pgsql-instance_attributes-master_ip" name="master_ip" value="172.16.0.111"/>
> <nvpair id="pgsql-instance_attributes-stop_escalate" name="stop_escalate" value="0"/>
> </instance_attributes>
> </primitive>
> </resources>
> <constraints>
> <rsc_location id="rsc-location-1" rsc="ClusterIP">
> <rule id="rsc-location-1-rule" score="200">
> <expression attribute="pgsql-status" id="rsc-location-1-rule-pgsql-status" operation="eq" value="HS:sync"/>
> </rule>
> <rule id="rsc-location-1-rule-0" score="100">
> <expression attribute="pgsql-status" id="rsc-location-1-rule-0-pgsql-status" operation="eq" value="PRI"/>
> </rule>
> <rule id="rsc-location-1-rule-1" score="-INFINITY">
> <expression attribute="pgsql-status" id="rsc-location-1-rule-1-pgsql-status" operation="not_defined"/>
> </rule>
> <rule boolean-op="and" id="rsc-location-1-rule-2" score="-INFINITY">
> <expression attribute="pgsql-status" id="rsc-location-1-rule-2-pgsql-status" operation="ne" value="HS:sync"/>
> <expression attribute="pgsql-status" id="rsc-location-1-rule-2-pgsql-status-0" operation="ne" value="PRI"/>
> </rule>
> </rsc_location>
> <rsc_location id="rsc-location-2" rsc="pgsql">
> <rule id="rsc-location-2-rule" role="Master" score="200">
> <expression attribute="#uname" id="rsc-location-2-rule-.uname" operation="eq" value="test-db1"/>
> </rule>
> <rule id="rsc-location-2-rule-0" role="Master" score="100">
> <expression attribute="#uname" id="rsc-location-2-rule-0-.uname" operation="eq" value="test-db2"/>
> </rule>
> <rule id="rsc-location-2-rule-1" role="Master" score="-INFINITY">
> <expression attribute="fail-count-ClusterIP" id="rsc-location-2-rule-1-fail-count-ClusterIP" operation="defined"/>
> </rule>
> <rule boolean-op="or" id="rsc-location-2-rule-2" score="-INFINITY">
> <expression attribute="default_ping_set" id="rsc-location-2-rule-2-default_ping_set" operation="not_defined"/>
> <expression attribute="default_ping_set" id="rsc-location-2-rule-2-default_ping_set-0" operation="lt" value="100"/>
> </rule>
> </rsc_location>
> <rsc_colocation id="rsc_colo-1" rsc="pgsql" score="INFINITY" with-rsc="ClusterIP"/>
> <rsc_order first="ClusterIP" first-action="start" id="rsc_order_1" symmetrical="false" then="pgsql" then-action="promote"/>
> </constraints>
> Any ideas?
>
> Thanks,
> Keith
>
>
> ________________________________________
> From: Takatoshi MATSUO [matsuo.tak at gmail.com]
> Sent: Wednesday, January 09, 2013 8:23 PM
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] Postresql streaming replication support
>
> Hi Keith
>
> I don't write detailed documentation.
> But I spoke about it using this slide.
>
> http://linux-ha.sourceforge.jp/wp/archives/3404
>
> Did you read it?
>
> I translated it into English.
> Please click "English version is here : PG-study" to download it.
> (Sorry for bad translation)
>
>
> Regards,
> Takatoshi MATSUO
>
>
> 2013/1/10 Keith Ouellette <Keith.Ouellette at airgas.com>
>>
>> Jesse,
>>
>>
>>
>>
>>
>> Thank you for the quick response. Actually yes, the example given at the link below shows several connections between the two (cross-overs). We only have one connection between the two nodes with a bridged VPN.
>>
>>
>>
>>
>>
>>
>>
>>
>> The example has an S-LAN, D-LAN and an IC-LAN. I only have one LAN available to me with a bridge VPN between the two routers. I tried to skinny the configuration to a single virtual IP primitive called "ClusterIP", but I think there are some other dependancies in the example that I am not seeing as it did not work, meaning the resources did not start. Is there another place I can go that may provide more detailed documentation that may help me with my configuration?
>>
>>
>>
>>
>>
>> Keith
>>
>> ________________________________
>> From: Jesse Hathaway [jesse.hathaway at getbraintree.com]
>> Sent: Wednesday, January 09, 2013 2:09 PM
>> To: The Pacemaker cluster resource manager; Jesse Hathaway
>> Subject: Re: [Pacemaker] Postresql streaming replication support
>>
>> On Wed, Jan 9, 2013 at 12:56 PM, Keith Ouellette <Keith.Ouellette at airgas.com> wrote:
>>>
>>> Now I am trying to get that integrated with pacemaker. In my searches, I see that pacemaker with DRBD seems to be the prevelant implementation an most documentation was written around that. However, due to our network conditions, I am looking for information on doing this with WAL. I did find a resource agent that was wirtten for what I am doing (https://github.com/t-matsuo/resource-agents/wiki/Resource-Agent-for-PostgreSQL-9.1-streaming-replication). The issue is the example if complex with the explanation written only toward that example. Is there another place that I can get documentation on this resource agent? Is there another way that this could be accmoplished that someone has tried?
>>
>> Keith we are using the above resource agent in production with streaming replication. Do you have any specific questions about its usage?
>>
>> --
>> Jesse Hathaway, Systems Engineer
>> Braintree
>> 917-418-8423
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
More information about the Pacemaker
mailing list