[Pacemaker] cluster heartbeat is not used

[Dvorak Andreas]

Hi

Here it is
cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)

Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: em3
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

Slave Interface: em3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: c8:1f:66:d7:3b:fe
Slave queue ID: 0

Slave Interface: p3p3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:0a:f7:3e:ca:8e
Slave queue ID: 0

Andreas

Von: emmanuel segura [mailto:emi2fast at gmail.com]
Gesendet: Montag, 9. Dezember 2013 15:50
An: The Pacemaker cluster resource manager
Betreff: Re: [Pacemaker] cluster heartbeat is not used

show  cat /proc/net/bonding/bond0

2013/12/9 Dvorak Andreas <Andreas.Dvorak at baaderbank.de<mailto:Andreas.Dvorak at baaderbank.de>>
Dear all,

during failover tests I found out that I can put down the heartbeat interfaces  and the cluster ignores that. But if I put down bond0 the fencing is running.
Can please somebody help me?

bond0     Link encap:Ethernet  HWaddr C8:1F:66:D7:3B:FE
          inet addr:10.15.28.36  Bcast:10.15.255.255  Mask:255.255.0.0
          inet6 addr: fe80::ca1f:66ff:fed7:3bfe/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1

em4       Link encap:Ethernet  HWaddr C8:1F:66:D7:3B:FF
          inet addr:192.168.2.36  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::ca1f:66ff:fed7:3bff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

p3p4      Link encap:Ethernet  HWaddr 00:0A:F7:3E:CA:8F
          inet addr:192.168.3.36  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fe80::20a:f7ff:fe3e:ca8f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

I have the following corosync.conf
# Please read the corosync.conf.5 manual page
compatibility: whitetank
totem {
                version: 2
                secauth: off
                threads: 0
                interface {
                               ringnumber: 0
                               bindnetaddr: 192.168.2.0
                               mcastaddr: 226.94.1.1
                               mcastport: 5405
                               ttl: 1
                }
    interface {
        ringnumber: 1
        bindnetaddr: 192.168.3.0
        mcastaddr: 226.94.1.2
        mcastport: 5407
        ttl: 1
    }
}
logging {
                fileline: off
                to_stderr: no
                to_logfile: yes
                to_syslog: yes
                logfile: /var/log/cluster/corosync.log
                debug: off
                timestamp: on
                logger_subsys {
                               subsys: AMF
                               debug: off
                }
}
amf {
                mode: disabled
}

I have installed
    cluster-glue-libs.1.0.5.x86_64.CentOS
    corosynclib.1.4.1.x86_64.CentOS
    openais.1.1.1.x86_64.CentOS
    cman.3.0.12.1.x86_64.CentOS
    pacemaker-libs.1.1.8.x86_64.CentOS
    resource-agents.3.9.2.x86_64.CentOS
    corosync.1.4.1.x86_64.CentOS
    modcluster.0.16.2.x86_64.CentOS
    openaislib.1.1.1.x86_64.CentOS
    pacemaker-cluster-libs.1.1.8.x86_64.CentOS
    pacemaker.1.1.8.x86_64.CentOS
    pcs.0.9.26.noarch.CentOS
    libqb.0.14.2.x86_64.CentOS
    clusterlib.3.0.12.1.x86_64.CentOS
    ricci.0.16.2.x86_64.CentOS
    pacemaker-cli.1.1.8.x86_64.CentOS
    fence-virt.0.2.3.x86_64.CentOS
    ccs.0.16.2.x86_64.CentOS

# corosync-cfgtool -s
Printing ring status.
Local node ID 1
RING ID 0
                id            = 10.15.28.36
                status   = ring 0 active with no faults
# pcs status corosync
Nodeid     Name
   1   sv2836.muc.baag
   2   sv2837.muc.baag

# crm_mon --one-shot -V
Last updated: Mon Dec  9 14:56:32 2013
Last change: Mon Dec  9 14:07:03 2013 via cibadmin on sv2836
Stack: cman
Current DC: sv2836 - partition with quorum
Version: 1.1.10-1.el6_4.4-368c726
2 Nodes configured
4 Resources configured

Online: [ sv2836 sv2837 ]

ClusterIP            (ocf::heartbeat:IPaddr2):            Started sv2836
 FIXRoute            (ocf::baader:FIXRoute):               Started sv2836
 ipmi-fencing-sv2837    (stonith:fence_ipmilan):            Started sv2836
 ipmi-fencing-sv2836    (stonith:fence_ipmilan):            Started sv2837

Best regards
Andreas Dvorak

_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org<mailto:Pacemaker at oss.clusterlabs.org>
http://oss.clusterlabs.org/mailman/listinfo/pacemaker

Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org



--
esta es mi vida e me la vivo hasta que dios quiera
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20131209/e7dc8f62/attachment.htm>