[Pacemaker] Node level fencing advice

[Matthew O'Connor]

Hi!

I have used a small variety of fencing on my very small clusters.  My
opinions here are all my own. ;-) Here's what I've had experience with:

  * USB-capable APC Back-UPS with NUT (
http://www.networkupstools.org/).  It works and has served me well for
two, three, and four node clusters.  With two-node clusters I
cross-connect the nodes to each other's UPSs, obviating the need for a
third system to act as the NUT server.  (I detailed my experiences with
setting up UPS+NUT-based stonith on my blog:
http://burning-midnight.blogspot.com/2012/08/vm-clusternow-with-stonith-on-budget.html) 
I would have larger clusters talk to a central (non-cluster) NUT server;
occasionally an interruption in communication would cause the stonith
resource to fail and thus make stonith impossible until the failure was
cleared, but luckily this seemed to be rare (and non-existent in the
cross-connected case).

  * APC PDU ( Model AP7900), via SNMP.  These work very well for me,
though I've found you have to tweak the timing parameters in the stonith
agent to get it to work correctly (i.e. to shut down the outlet for
sufficient time, and not just a brief off-on operation).  I like them
very much; they provide per-outlet control and are not too expensive. 
Its web interface is also very handy for remote-controlling both cluster
and non-cluster systems.

  * IPMI on Supermicro-based motherboards.  I've heard good things, and
not-so-good things.  In my environment, issues with keeping connected
with IPMI was the reason I moved away from using it; the IPMI would
eventually just stop responding to commands.  I suspect it's an issue
with the IPMI itself, something unresolved that only Supermicro can
fix.  As with any stonith, test thoroughly.  Some folks do a two-step
stonith: IPMI, then power, just to make doubly-sure. 

Hope this helps!


On 08/16/2013 06:13 PM, Nick Khamis wrote:
> Hello Everyone,
>
> We are in the market for a new UPS. And would like to know some of
> your experiences given the different means of stonith (ie, ups, pdu,
> blade hardware). The UPS unit we are looking at
> is:http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SYA4K8RMP&total_watts=500.
> But before all that would like to know if RSA/iLO/DRAC is the
> preferred way of implementing it?
>
> One thing to think of is that with a UPS stonith, there is less worry
> of drivers, kernel modules etc...? As for PDU level stontih, can we
> really expect anything more from our PDU other than distribution?
>
>
> Have more questions but for the sake of brevity...
>
>
> Kind Regards,
>
> Nick.
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org

-- 
Thank you!
  Matthew O'Connor
  (GPG Key ID: 55F981C4)


CONFIDENTIAL NOTICE: The information contained in this electronic message is legally privileged, confidential and exempt from disclosure under applicable law. It is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender immediately by return e-mail and delete the original message and any copies of it from your computer system. Thank you.
 
EXPORT CONTROL WARNING:  This document may contain technical data that is subject to the International Traffic in Arms Regulations (ITAR) controls and may not be exported or otherwise disclosed to any foreign person or firm, whether in the US or abroad, without first complying with all requirements of the ITAR, 22 CFR 120-130, including the requirement for obtaining an export license if applicable. In addition, this document may contain technology that is subject to the Export Administration Regulations (EAR) and may not be exported or otherwise disclosed to any non-U.S. person, whether in the US or abroad, without first complying with all requirements of the EAR, 15 CFR 730-774, including the requirement for obtaining an export license if applicable. Violation of these export laws is subject to severe criminal penalties.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20130821/e68d3415/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5029 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20130821/e68d3415/attachment-0004.p7s>