[Pacemaker] crm_simulate a resource failure

[Cal Heldenbrand]

Oye, nothing I try seems to work.  Verbose doesn't give me any extra
output.  $stop with $error also didn't do anything.  I've tried a whole
mess of combinations and none of them seemed to make a difference.

On Tue, Oct 23, 2012 at 1:40 PM, Jake Smith <jsmith at argotec.com> wrote:

> Maybe try with verbose flag.  Maybe try with error for the exit code?  Or
> try $stop and $error to see if it will show anything - I would expect
> something like a node fence from that.
>
> crm_simulate with -LS for me causes seg fault so I can't test :-(
>
>  Jake
>
> ------------------------------
> *From: *"Cal Heldenbrand" <cal at fbsdata.com>
> *To: *"Jake Smith" <jsmith at argotec.com>, "The Pacemaker cluster resource
> manager" <pacemaker at oss.clusterlabs.org>
> *Sent: *Tuesday, October 23, 2012 2:01:59 PM
> *Subject: *Re: [Pacemaker] crm_simulate a resource failure
>
>
> Thanks Jake, that at gives a little better description of the parameters,
> but I still just can't seem to get anything to trigger with the various
> syntaxes I'm trying.  See below, I'm using single quotes so the $ symbol
> isn't parsed by bash.  I've tried using my clone name, different return
> values, different task names, without the $ symbols... nothing seems to
> trigger anything in the Transition stuff.  And I don't get any error
> messages at all.
>
> Any other ideas for me?
>
> Thanks!
>
>
> ---------------------------------------------------------------------------------
> [root at m3 /]# crm_simulate -LS --op-fail='$memcached:0_$monitor_$1@$
> m1.fbsdata.com=$not_running'
>
> Current cluster status:
> Online: [ m1.fbsdata.com m2.fbsdata.com m3.fbsdata.com ]
>
>  Clone Set: memcached_clone [memcached]
>      Started: [ m1.fbsdata.com m2.fbsdata.com m3.fbsdata.com ]
>  cluster-ip-m1  (ocf::heartbeat:IPaddr2):       Started m1.fbsdata.com
>  cluster-ip-m2  (ocf::heartbeat:IPaddr2):       Started m2.fbsdata.com
>  cluster-ip-m3  (ocf::heartbeat:IPaddr2):       Started m3.fbsdata.com
>
> Transition Summary:
>
> Executing cluster transition:
>
> Revised cluster status:
> Online: [ m1.fbsdata.com m2.fbsdata.com m3.fbsdata.com ]
>
>  Clone Set: memcached_clone [memcached]
>      Started: [ m1.fbsdata.com m2.fbsdata.com m3.fbsdata.com ]
>  cluster-ip-m1  (ocf::heartbeat:IPaddr2):       Started m1.fbsdata.com
>  cluster-ip-m2  (ocf::heartbeat:IPaddr2):       Started m2.fbsdata.com
>  cluster-ip-m3  (ocf::heartbeat:IPaddr2):       Started m3.fbsdata.com
>
> ---------------------------------------------------------------------------------
>
> On Tue, Oct 23, 2012 at 12:27 PM, Jake Smith <jsmith at argotec.com> wrote:
>
>>
>> ----- Original Message -----
>>
>> > From: "Cal Heldenbrand" <cal at fbsdata.com>
>> > To: pacemaker at oss.clusterlabs.org
>> > Sent: Tuesday, October 23, 2012 11:50:11 AM
>> > Subject: [Pacemaker] crm_simulate a resource failure
>>
>> > Hi everyone,
>>
>> > I'm not able to find documentation or examples on this. If I have a
>> > cloned primitive set across a cluster, how can I simulate a failure
>> > of a resource on an individual node? I mainly want to see the scores
>> > on why a particular action is taken so I can adjust my configs.
>>
>> > I think the --op-fail parameter is what I need, but I just don't get
>> > the syntax of the value in the man page.
>>
>> I usually use the crm shell so I'm not positive but I think these are the
>> parts you need...
>>
>> $rsc_$task_$interval@$node=$rc
>>
>> $rsc = resource to test, in your case I believe you want to specify the
>> primitive instance of the clone i.e. p_resource:0
>> $task = monitor or migrate or stop or whatever operation you want to take
>> $interval = the interval of a monitor task
>> $node = the node
>> $rc = the exit code you want to fail with i.e. error, not_running
>>
>> So (I think) something like:
>> --op-fail=$p_of_clone_resource:0_$monitor_$10@$node1=$not_running
>>
>> You *should* be able to experiment till you get it just right since its
>> simulate.. :-)
>>
>> HTH
>>
>> Jake
>>
>> > Thank you!
>>
>> > --Cal
>>
>> > _______________________________________________
>> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> > Project Home: http://www.clusterlabs.org
>> > Getting started:
>> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> > Bugs: http://bugs.clusterlabs.org
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20121023/ccf0304a/attachment.htm>