[Pacemaker] STONITHed node cannot rejoin cluster for over 1000 elections
Andrew Beekhof
andrew at beekhof.net
Tue Oct 16 16:17:35 EDT 2012
On Wed, Oct 17, 2012 at 12:46 AM, Andrew Martin <amartin at xes-inc.com> wrote:
> Andrew,
>
> The pacemaker package built by Ubuntu requires the following dependencies
> (besides corosync, resource-agents, and cluster-glue):
> *libccs3 libcib1 *libcman3 libcrmcluster1 libcrmcommon2 *libesmtp6
> *libfence4 libpe-rules2 libpe-status3 libpengine3 libstonithd1
> libtransitioner1
>
> It appears that compiling pacemaker from source includes all of these
> dependencies except those marked with an asterisk above. I can install
> libesmtp6 and libcman3 without problem, but libfence4 (and dependency
> libccs3) require libconfdb4 and libcoroipcc4, which are now both part of the
> corosync 1.4.4 package that I compiled. Do I also need to build libccs3 and
> libfence4, or are these libraries deprecated in pacemaker 1.1.8 (I don't see
> them listed on
> https://github.com/ClusterLabs/pacemaker/blob/master/README.markdown)?
Thats because the ubuntu package layout is insane... no other distro
creates a package per library.
libccs3 and libfence4 comes from the Red Hat cluster suite.
You only care about them if you want to use Pacemaker with CMAN.
>
> Similarly, the Ubuntu corosync package requires the following: libcfg4
> libconfdb4 libcoroipcc4 libcoroipcs4 libcpg4 libevs4 liblogsys4 libpload4
> libquorum4 libsam4 libtotem-pg4 libvotequorum4, however all of these appear
> to be built into corosync when compiled from source.
Right, these are all corosync libraries, not independent projects.
>
> Thanks,
>
> Andrew
>
> ________________________________
> From: "Andrew Beekhof" <andrew at beekhof.net>
> To: "The Pacemaker cluster resource manager" <pacemaker at oss.clusterlabs.org>
> Sent: Monday, October 15, 2012 5:31:51 AM
>
> Subject: Re: [Pacemaker] STONITHed node cannot rejoin cluster for over 1000
> elections
>
> On Sat, Oct 13, 2012 at 1:53 AM, Andrew Martin <amartin at xes-inc.com> wrote:
>> Hi Andrew,
>>
>> Thanks, I'll compile Pacemaker 1.1.8 and Corosync 1.4.4. Can I leave
>> cluster-glue and resource-agents at the default versions provided with
>> Ubuntu 12.04 (1.0.8 and 3.9.2 respectively), or do I need to upgrade them
>> as
>> well?
>
> Should be fine. You will need to obtain a recent libqb build though.
>
>>
>> Andrew
>>
>> ________________________________
>> From: "Andrew Beekhof" <andrew at beekhof.net>
>> To: "The Pacemaker cluster resource manager"
>> <pacemaker at oss.clusterlabs.org>
>> Sent: Thursday, October 11, 2012 8:08:13 PM
>> Subject: Re: [Pacemaker] STONITHed node cannot rejoin cluster for over
>> 1000
>> elections
>>
>>
>> On Fri, Oct 12, 2012 at 7:12 AM, Andrew Martin <amartin at xes-inc.com>
>> wrote:
>>> Hello,
>>>
>>>
>>> I am running a 3-node Corosync+Pacemaker cluster with 2 "real" nodes
>>> running resources (storage0 and storage1) and a quorum node
>>> (storagequorum)
>>> in standby mode. All of the nodes run Ubuntu 12.04 server amd64. There
>>> are
>>> two corosync rings:
>>> rrp_mode: active
>>>
>>> interface {
>>> # the common LAN
>>> ringnumber: 0
>>> bindnetaddr: 10.10.0.0
>>> mcastaddr: 226.94.1.1
>>> mcastport: 5405
>>> }
>>>
>>> interface {
>>> # the STONITH network
>>> ringnumber: 1
>>> bindnetaddr: 192.168.7.0
>>> mcastaddr: 226.94.1.2
>>> mcastport: 5407
>>> }
>>>
>>> DRBD is configured to use /usr/lib/drbd/crm-fence-peer.sh to fence the
>>> peer node.
>>>
>>> There are 3 active interfaces on storage[01]: the common LAN, the STONITH
>>> network, and the DRBD replication link. The storagequorum node only has
>>> the
>>> common LAN and STONITH networks. When looking through the logs, note that
>>> the IP addresses for each node are assigned as follows:
>>>
>>> storage0: xxx.xxx.xxx.148
>>> storage1: xxx.xxx.xxx.149
>>> storagequorum: xxx.xxx.xxx.24
>>>
>>> Storage0 and storage1 also had a secondary link to the common LAN which
>>> has now been disabled (xxx.xxx.xxx.162 and xxx.xxx.xxx.163 respectively).
>>> You still may see it show up in the log, e.g.
>>> Oct 5 22:17:39 storagequorum crmd: [7873]: info: crm_update_peer: Node
>>> storage1: id=587281418 state=lost addr=r(0) ip(10.10.1.163) r(1)
>>> ip(192.168.7.149) votes=1 born=1828352 seen=1828368
>>> proc=00000000000000000000000000111312 (new)
>>>
>>> Here is the CIB configuration:
>>> http://pastebin.com/6TPkWtbt
>>>
>>> As you can see, the drbd-fence-by-handler-ms_drbd_drives primitive keeps
>>> getting added into the configuration but doesn't seem to get removed.
>>>
>>>
>>> I recently tried running a failover test by performing "crm resource
>>> migrate g_store" when the resources were running on storage1. The
>>> ocf:heartbeat:exportfs resources failed to stop due to
>>> wait_for_leasetime_on_stop being true (I am going to set this to false
>>> now
>>> because I don't need NFSv4 support). Recognizing this problem, the
>>> cluster
>>> correctly STONITHed storage1 and migrated the resources to storage0.
>>> However, once storage1 finished rebooting, it was unable to join the
>>> cluster
>>> (crm_mon shows it as [offline]). I have uploaded the syslog from the DC
>>> (storagequorum) from this time period here:
>>> http://sources.xes-inc.com/downloads/storagequorum.syslog.log . Initially
>>> after the STONITH it seems like storage1 rejoins the cluster
>>> successfully:
>>> Oct 5 22:17:39 storagequorum cib: [7869]: info: crm_update_peer: Node
>>> storage1: id=352400394 state=member (new) addr=r(0) ip(10.10.1.149) r(1)
>>> ip(192.168.7.149) (new) votes=1 born=1828384 seen=1828384
>>> proc=00000000000000000000000000111312
>>>
>>> However, later it becomes apparent that it cannot join:
>>> Oct 5 22:17:58 storagequorum crmd: [7873]: notice:
>>> do_election_count_vote: Election 15 (current: 15, owner: storagequorum):
>>> Processed no-vote from storage1 (Peer is not part of our cluster)
>>> ....
>>> Oct 6 03:49:58 storagequorum crmd: [18566]: notice:
>>> do_election_count_vote: Election 989 (current: 1, owner: storage1):
>>> Processed vote from storage1 (Peer is not part of our cluster)
>>>
>>> Around 1000 election cycles occur before storage1 is brought back into
>>> the
>>> cluster. What is the cause of this and how can I modify my cluster
>>> configuration to have nodes rejoin right away?
>>
>> Its not a configuration issue, you're hitting one or more bugs.
>>
>> You seem to be using 1.1.6, can I suggest an upgrade to 1.1.8? I
>> recall fixing related issues in the last month or so.
>> Also consider an updated corosync, there were some related fixes there
>> too.
>>
>>>
>>>
>>> Thanks,
>>>
>>> Andrew Martin
>>>
>>>
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org
>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
More information about the Pacemaker
mailing list