[Pacemaker] [corosync] Corosync 2.1.0 dies on both nodes in cluster

Mon Nov 5 08:21:09 UTC 2012

Angus Salkeld napsal(a):
> On 02/11/12 13:07 -0500, Andrew Martin wrote:
>> Hi Angus,
>>
>>
>> Corosync died again while using libqb 0.14.3. Here is the coredump
>> from today:
>> http://sources.xes-inc.com/downloads/corosync.nov2.coredump
>>
>>
>>
>> # corosync -f
>> notice [MAIN ] Corosync Cluster Engine ('2.1.0'): started and ready to
>> provide service.
>> info [MAIN ] Corosync built-in features: pie relro bindnow
>> Bus error (core dumped)
>>
>>
>> Here's the log: http://pastebin.com/bUfiB3T3
>>
>>
>> Did your analysis of the core dump reveal anything?
>>
> 
> I can't get any symbols out of these coredumps. Can you try get a
> backtrace?
> 

Andrew,
as I've wrote in original mail, backtrace can be got by:

coredumps are stored in /var/lib/corosync as core.PID, and
way to obtain coredump is gdb corosync /var/lib/corosync/core.pid, and
here thread apply all bt). If you are running distribution with ABRT
support, you can also use ABRT to generate report.

It's also pretty weird that you are getting SIGBUS. SIGBUS is pretty
usually result of accessing unaligned memory on processors without
support to access that (for example Sparc). This doesn't seem to be your
case (because of AMD64).

>>
>> Is there a way for me to make it generate fdata with a bus error, or
>> how else can I gather additional information to help debug this?
>>
> 
> if you look in exec/main.c and look for SIGSEGV you will see how the
> mechanism
> for fdata works. Just and a handler for SIGBUS and hook it up. Then you
> should
> be able to get the fdata for both.
> 
> I'd rather be able to get a backtrace if possible.
> 

Also if possible, please try to compile with --enable-debug (both libqb
and corosync) to get as much information as possible.

> -Angus
> 

Regards,
  Honza

>>
>> Thanks,
>>
>>
>> Andrew
>>
>> ----- Original Message -----
>>
>> From: "Angus Salkeld" <asalkeld at redhat.com>
>> To: pacemaker at oss.clusterlabs.org, discuss at corosync.org
>> Sent: Thursday, November 1, 2012 5:47:16 PM
>> Subject: Re: [corosync] [Pacemaker] Corosync 2.1.0 dies on both nodes
>> in cluster
>>
>> On 01/11/12 17:27 -0500, Andrew Martin wrote:
>>> Hi Angus,
>>>
>>>
>>> I'll try upgrading to the latest libqb tomorrow and see if I can
>>> reproduce this behavior with it. I was able to get a coredump by
>>> running corosync manually in the foreground (corosync -f):
>>> http://sources.xes-inc.com/downloads/corosync.coredump
>>
>> Thanks, looking...
>>
>>>
>>>
>>> There still isn't anything added to /var/lib/corosync however. What
>>> do I need to do to enable the fdata file to be created?
>>
>> Well if it crashes with SIGSEGV it will generate it automatically.
>> (I see you are getting a bus error) - :(.
>>
>> -A
>>
>>>
>>>
>>> Thanks,
>>>
>>> Andrew
>>>
>>> ----- Original Message -----
>>>
>>> From: "Angus Salkeld" <asalkeld at redhat.com>
>>> To: pacemaker at oss.clusterlabs.org, discuss at corosync.org
>>> Sent: Thursday, November 1, 2012 5:11:23 PM
>>> Subject: Re: [corosync] [Pacemaker] Corosync 2.1.0 dies on both nodes
>>> in cluster
>>>
>>> On 01/11/12 14:32 -0500, Andrew Martin wrote:
>>>> Hi Honza,
>>>>
>>>>
>>>> Thanks for the help. I enabled core dumps in
>>>> /etc/security/limits.conf but didn't have a chance to reboot and
>>>> apply the changes so I don't have a core dump this time. Do core
>>>> dumps need to be enabled for the fdata-DATETIME-PID file to be
>>>> generated? right now all that is in /var/lib/corosync are the
>>>> ringid_XXX files. Do I need to set something explicitly in the
>>>> corosync config to enable this logging?
>>>>
>>>>
>>>> I did find find something else interesting with libqb this time. I
>>>> compiled libqb 0.14.2 for use with the cluster. This time when
>>>> corosync died I noticed the following in dmesg:
>>>> Nov 1 13:21:01 storage1 kernel: [31036.617236] corosync[13305] trap
>>>> divide error ip:7f657a52e517 sp:7fffd5068858 error:0 in
>>>> libqb.so.0.14.2[7f657a525000+1f000]
>>>> This error was only present for one of the many other times corosync
>>>> has died.
>>>>
>>>>
>>>> I see that there is a newer version of libqb (0.14.3) out, but
>>>> didn't see a fix for this particular bug. Could this libqb problem
>>>> be related to the corosync to hang up? Here's the corresponding
>>>> corosync log file (next time I should have a core dump as well):
>>>> http://pastebin.com/5FLKg7We
>>>
>>> Hi Andrew
>>>
>>> I can't see much wrong with the log either. If you could run with the
>>> latest
>>> (libqb-0.14.3) and post a backtrace if it still happens, that would
>>> be great.
>>>
>>> Thanks
>>> Angus
>>>
>>>>
>>>>
>>>> Thanks,
>>>>
>>>>
>>>> Andrew
>>>>
>>>> ----- Original Message -----
>>>>
>>>> From: "Jan Friesse" <jfriesse at redhat.com>
>>>> To: "Andrew Martin" <amartin at xes-inc.com>
>>>> Cc: discuss at corosync.org, "The Pacemaker cluster resource manager"
>>>> <pacemaker at oss.clusterlabs.org>
>>>> Sent: Thursday, November 1, 2012 7:55:52 AM
>>>> Subject: Re: [corosync] Corosync 2.1.0 dies on both nodes in cluster
>>>>
>>>> Ansdrew,
>>>> I was not able to find anything interesting (from corosync point of
>>>> view) in configuration/logs (corosync related).
>>>>
>>>> What would be helpful:
>>>> - if corosync died, there should be
>>>> /var/lib/corosync/fdata-DATETTIME-PID of dead corosync. Can you please
>>>> xz them and store somewhere (they are quiet large but well
>>>> compressible).
>>>> - If you are able to reproduce problem (what seems like you are), can
>>>> you please allow generating of coredumps and store somewhere backtrace
>>>> of coredump? (coredumps are stored in /var/lib/corosync as core.PID,
>>>> and
>>>> way to obtain coredump is gdb corosync /var/lib/corosync/core.pid, and
>>>> here thread apply all bt). If you are running distribution with ABRT
>>>> support, you can also use ABRT to generate report.
>>>>
>>>> Regards,
>>>> Honza
>>>>
>>>> Andrew Martin napsal(a):
>>>>> Corosync died an additional 3 times during the night on storage1. I
>>>>> wrote a daemon to attempt and start it as soon as it fails, so only
>>>>> one of those times resulted in a STONITH of storage1.
>>>>>
>>>>> I enabled debug in the corosync config, so I was able to capture a
>>>>> period when corosync died with debug output:
>>>>> http://pastebin.com/eAmJSmsQ
>>>>> In this example, Pacemaker finishes shutting down by Nov 01
>>>>> 05:53:02. For reference, here is my Pacemaker configuration:
>>>>> http://pastebin.com/DFL3hNvz
>>>>>
>>>>> It seems that an extra node, 16777343 "localhost" has been added to
>>>>> the cluster after storage1 was STONTIHed (must be the localhost
>>>>> interface on storage1). Is there anyway to prevent this?
>>>>>
>>>>> Does this help to determine why corosync is dying, and what I can
>>>>> do to fix it?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Andrew
>>>>>
>>>>> ----- Original Message -----
>>>>>
>>>>> From: "Andrew Martin" <amartin at xes-inc.com>
>>>>> To: discuss at corosync.org
>>>>> Sent: Thursday, November 1, 2012 12:11:35 AM
>>>>> Subject: [corosync] Corosync 2.1.0 dies on both nodes in cluster
>>>>>
>>>>>
>>>>> Hello,
>>>>>
>>>>> I recently configured a 3-node fileserver cluster by building
>>>>> Corosync 2.1.0 and Pacemaker 1.1.8 from source. All of the nodes
>>>>> are running Ubuntu 12.04 amd64. Two of the nodes (storage0 and
>>>>> storage1) are "real" nodes where the resources run (a DRBD disk,
>>>>> filesystem mount, and samba/nfs daemons), while the third node
>>>>> (storagequorum) is in standby mode and acts as a quorum node for
>>>>> the cluster. Today I discovered that corosync died on both storage0
>>>>> and storage1 at the same time. Since corosync died, pacemaker shut
>>>>> down as well on both nodes. Because the cluster no longer had
>>>>> quorum (and the no-quorum-policy="freeze"), storagequorum was
>>>>> unable to STONITH either node and just left the resources frozen
>>>>> where they were running, on storage0. I cannot find any log
>>>>> information to determine why corosync crashed, and this is a
>>>>> disturbing problem as the cluster and its messaging layer must be
>>>>> stable. Below is my corosync configuration file as well as the
>>>>> corosync log file from each!
>  !
>> n!
>>> o!
>>>> de during
>>>> this period.
>>>>>
>>>>> corosync.conf:
>>>>> http://pastebin.com/vWQDVmg8
>>>>> Note that I have two redundant rings. On one of them, I specify the
>>>>> IP address (in this example 10.10.10.7) so that it binds to the
>>>>> correct interface (since potentially in the future those machines
>>>>> may have two interfaces on the same subnet).
>>>>>
>>>>> corosync.log from storage0:
>>>>> http://pastebin.com/HK8KYDDQ
>>>>>
>>>>> corosync.log from storage1:
>>>>> http://pastebin.com/sDWkcPUz
>>>>>
>>>>> corosync.log from storagequorum (the DC during this period):
>>>>> http://pastebin.com/uENQ5fnf
>>>>>
>>>>> Issuing service corosync start && service pacemaker start on
>>>>> storage0 and storage1 resolved the problem and allowed the nodes to
>>>>> successfully reconnect to the cluster. What other information can I
>>>>> provide to help diagnose this problem and prevent it from recurring?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Andrew Martin
>>>>>
>>>>> _______________________________________________
>>>>> discuss mailing list
>>>>> discuss at corosync.org
>>>>> http://lists.corosync.org/mailman/listinfo/discuss
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> discuss mailing list
>>>>> discuss at corosync.org
>>>>> http://lists.corosync.org/mailman/listinfo/discuss
>>>>
>>>>
>>>
>>>> _______________________________________________
>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>
>>>> Project Home: http://www.clusterlabs.org
>>>> Getting started:
>>>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>> Bugs: http://bugs.clusterlabs.org
>>>
>>>
>>> _______________________________________________
>>> discuss mailing list
>>> discuss at corosync.org
>>> http://lists.corosync.org/mailman/listinfo/discuss
>>>
>>
>> _______________________________________________
>> discuss mailing list
>> discuss at corosync.org
>> http://lists.corosync.org/mailman/listinfo/discuss
>>
> 
> _______________________________________________
> discuss mailing list
> discuss at corosync.org
> http://lists.corosync.org/mailman/listinfo/discuss