[Pacemaker] Xen, Pacemaker and live migration

emmanuel segura emi2fast at gmail.com
Mon Jan 23 11:41:31 UTC 2012


I think it's better make a group and after make a clone active/active

for example

===========================================
group sys_rg dlm_r o2cb_r clvmd_r
clone sys_clone_rg sys_rg
===========================================

I don't like this contrain
===========================================
colocation CLVMCloneWithLVMforVM1 inf: LVMforVM1 clvm-clone
===========================================

clvm-clone it's active/active and LVMforVM1 it's a failover resource

I think you have a logical Problem in your Cluster config


2012/1/23 Andreas Kurz <andreas at hastexo.com>

> Hello Frank,
>
> On 01/21/2012 05:25 PM, emmanuel segura wrote:
> > Hello Frank
> >
> > The first thing I found wrong in your config is
> >
> > =====================================================
> > colocation CLVMCloneWithLVMforVM1 inf: LVMforVM1 clvm-clone
> > =====================================================
>
> That part is ok, LVMforVM1 depends on clvm-clone ... see bellow for some
> comments ...
>
> >
> > clvm-clone must be a resource running on every cluster node, not just
> > where lvm for the vm1 it's running
> >
> > 2012/1/20 Frank Meier <Frank.Meier at hr-group.de
> > <mailto:Frank.Meier at hr-group.de>>
> >
> >     Hi there,
> >
> >     I'm new in clustering and
> >     I have problems to get xen live migration running.
> >
> >     I configure cLVM and manual migration works, but xen goes down and
> >     starts on the second node new.
> >
> >     node xencluster1 \
> >            attributes standby="off"
> >     node xencluster2 \
> >            attributes standby="off"
> >     primitive LVMforVM1 ocf:heartbeat:LVM \
> >            meta target-role="started" is-managed="true" \
> >            operations $id="LVMforVM1-operations" \
> >            op monitor interval="10" timeout="30" \
> >            params volgrpname="vm1VG" exclusive="yes"
> >     primitive STONITH--Node1 stonith:meatware \
> >            meta target-role="Started" \
> >            operations $id="STONITH--Node1-operations" \
> >            op monitor interval="15" timeout="15" start-delay="15" \
> >            params hostlist="xencluster1.reno.de"
>
> The hostlist needs to inculde the node names as used by
> Pacemaker/Corosync ... so xencluster1, xenscluster2
>
> >     primitive STONITH-Node2 stonith:meatware \
> >            meta target-role="started" \
> >            operations $id="STONITH-Node2-operations" \
> >            op monitor interval="15" timeout="15" start-delay="15" \
> >            params hostlist="xencluster2.reno.de
> >     <http://xencluster2.reno.de>"
> >     primitive VM1 ocf:heartbeat:Xen \
> >            meta allow-migrate="true" target-role="started" \
> >            operations $id="VM1-operations" \
> >            op monitor interval="10" timeout="30" \
> >            params xmfile="/etc/xen/vm/VM1"
> >     primitive clvm ocf:lvm2:clvmd \
> >            operations $id="clvm-operations" \
> >            op monitor interval="10" timeout="20" \
> >            params daemon_timeout="30"
> >     primitive dlm ocf:pacemaker:controld \
> >            operations $id="dlm-operations" \
> >            op monitor interval="10" timeout="20" start-delay="0" \
> >            meta target-role="started"
> >     clone clvm-clone clvm \
> >            meta target-role="started" ordered="true" interleave="true"
> >     clone dlm-clone dlm \
> >            meta target-role="started" ordered="true" interleave="true"
> >     location STONITHnode1Constraint STONITH--Node1 -inf: xencluster1
> >     location cli-prefer-VM1 VM1 \
> >            rule $id="cli-prefer-rule-VM1" inf: #uname eq xencluster2
> >     colocation CLVMCloneWithLVMforVM1 inf: LVMforVM1 clvm-clone
> >     colocation DLMCloneWithcLVMClone inf: dlm-clone clvm-clone
>
> The clvm depends on the dlm ... inf: clvm-clone dlm-clone
>
> >     colocation VM1WithLVM1forVM1 inf: VM1 LVMforVM1
> >     order DLMCloneBeforecLVMClone : dlm-clone clvm-clone
> >     order LVMforVM1BeforeVM1 : LVMforVM1 VM1
> >     order cLVMCloneBeforeLVMforVM1 : clvm-clone LVMforVM1
> >     property $id="cib-bootstrap-options" \
> >            dc-version="1.1.2-2e096a41a5f9e184a1c1537c82c6da1093698eb5" \
>
> It's a good idea to update.
>
> >            no-quorum-policy="ignore" \
> >            stonith-enabled="false" \
>
> Don't forget to enable stonith.
>
> >            default-resource-stickiness="100000" \
> >            last-lrm-refresh="1327076030" \
> >            cluster-infrastructure="openais" \
> >            expected-quorum-votes="2"
> >
> >
> >     Any clue?
>
> What is the error you see when running the migration? For a live system
> I would expect the default timeout of 20s for migration actions to be
> too low ... any errors because of timeouts in "crm_mon -1fr"?
>
> Regards,
> Andreas
>
> --
> Need help with Pacemaker?
> http://www.hastexo.com/now
>
> >
> >
> >
> >     Mit freundlichen Grüßen
> >
> >     Frank Meier
> >     UNIX-Basis
> >
> >     Hamm Reno Group GmbH
> >     Industriegebiet West | D-66987 Thaleischweiler-Fröschen
> >     T.+49(0)6334 444-322 <tel:%2B49%280%296334%20444-322> | F.+49(0)6334
> >     444-190 <tel:%2B49%280%296334%20444-190>
> >     frank.meier at hr-group.de <mailto:frank.meier at hr-group.de> |
> >     www.my-reno.com <http://www.my-reno.com>
> >     ___________________________________________________________________
> >
> >     Sitz: Am Tie 7 | D-49086 Osnabrück
> >     Handelsregister Osnabrück HRB 19587
> >     Geschäftsführer: Hans-Jürgen de Fries,
> >     Jens Gransee, Manfred Klumpp,
> >     Robert Reisch, Albert Scherer
> >
> >     _______________________________________________
> >     Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> >     <mailto:Pacemaker at oss.clusterlabs.org>
> >     http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> >     Project Home: http://www.clusterlabs.org
> >     Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> >     Bugs: http://bugs.clusterlabs.org
> >
> >
> >
> >
> > --
> > esta es mi vida e me la vivo hasta que dios quiera
> >
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
>
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>


-- 
esta es mi vida e me la vivo hasta que dios quiera
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20120123/135b4bf3/attachment.htm>


More information about the Pacemaker mailing list