[Pacemaker] Cannot Create Primitive in CRM Shell

[Jake Smith]

Andrew,

Curious - Did you check the version before you applied the fix I posted?

No idea on the long shutdown time (mine wasn't even shutting down before the fix - now it's under 30 seconds)...
What version of corosync? pacemaker?

Jake 



----- Original Message ----- 

> From: "Andrew Martin" <amartin at xes-inc.com>
> To: "The Pacemaker cluster resource manager"
> <pacemaker at oss.clusterlabs.org>
> Sent: Monday, January 9, 2012 5:06:13 PM
> Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell

> Hi Jake,

> I applied the fix you posted, rebooted my system, and I am now able
> to create primitives from the crm shell! I have confirmed that the
> ppa version of libglib2.0-0 is the one that is installed
> (2.24.1-0ubuntu1.1~ppa1).

> I am not sure if it is a side-effect of this problem or not but
> shutting down the machines takes quite awhile - at least 5 minutes.
> During this time crmd prints a bunch of Pending (id: ...) statements
> for different resources in my pacemaker configuration. Eventually it
> times out and does restart, though it seems like this behavior could
> be improved.

> Thanks!

> Andrew

> ----- Original Message -----

> From: "Jake Smith" <jsmith at argotec.com>
> To: "The Pacemaker cluster resource manager"
> <pacemaker at oss.clusterlabs.org>
> Sent: Monday, January 9, 2012 3:03:14 PM
> Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell

> Andrew - my solution below may have been a premature answer. It may
> have only applied to something on my system that wasn't right.

> First thing would be to check and see if you have the correct
> libglib2.0-0 version:

> 2.24.1-0ubuntu1.1~ppa1

> If you do than disregard below.

> Jake

> ----- Original Message -----
> > From: "Jake Smith" <jsmith at argotec.com>
> > To: "The Pacemaker cluster resource manager"
> > <pacemaker at oss.clusterlabs.org>
> > Sent: Monday, January 9, 2012 3:31:23 PM
> > Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell
> >
> > ----- Original Message -----
> > > From: "Rasto Levrinc" <rasto.levrinc at gmail.com>
> > > To: "The Pacemaker cluster resource manager"
> > > <pacemaker at oss.clusterlabs.org>
> > > Sent: Monday, January 9, 2012 2:12:54 PM
> > > Subject: Re: [Pacemaker] Cannot Create Primitive in CRM Shell
> > >
> > > On Mon, Jan 9, 2012 at 3:34 PM, Andrew Martin
> > > <amartin at xes-inc.com>
> > > wrote:
> > > > Hi Florian,
> > > >
> > > > Thanks for the quick response. This is a fresh install of
> > > > pacemaker/heartbeat on two VMs so it should not have any
> > > > previous/corrupted
> > > > configuration (Ubuntu 10.04 amd64). I had previously deployed
> > > > pacemaker on
> > > > alternative copies of these VM images, but both of those have
> > > > since
> > > > been
> > > > deleted. I am using the versions of these packages from the
> > > > Ubuntu
> > > > HA
> > > > PPA because the Lucid version does not appear to contain
> > > > ocf:heartbeat:exportfs.
> >
> > Andrew - I was having similiar problems and I believe I've fixed it
> > on mine and wouldn't be surprised if it was the same on yours.
> >
> > ***All the credit goes to Florian and the Hastexo group from
> > pointing
> > me to the problem***
> >
> > I use the ubuntu-ha-maintainers PPA also. There is an updated
> > version of libglib2.0-0 that (along with some fixes that are
> > applied
> > to corosync? in the ppa) fixes the issue you and I were seeing with
> > adding primitives and ra info commands and even caused corosync to
> > hang on stop for mine.
> > Problem is that the libglib2.0-0 has an updated package in Lucid
> > updates which gives it priority over the version in the ppa. To
> > fix:
> >
> > (assuming you are using the ubuntu-ha-maintainers ppa)
> >
> > $vi /etc/apt/preferences.d/ubuntu-ha-maintainers-ppa-pin-995
> > and add:
> >
> > Package: *
> > Pin: release o=LP-PPA-ubuntu-ha-maintainers
> > Pin-Priority: 995
> >
> > Then apt-get upgrade. Then I restarted both nodes and all was well.
> >
> > HTH!
> >
> > Jake
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs: http://bugs.clusterlabs.org
> >

> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker

> Project Home: http://www.clusterlabs.org
> Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org

> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker

> Project Home: http://www.clusterlabs.org
> Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org