[Pacemaker] Postgresql streaming replication failover - RA needed
Takatoshi MATSUO
matsuo.tak at gmail.com
Sun Nov 27 00:12:12 EST 2011
Hi Attila
2011/11/27 Attila Megyeri <amegyeri at minerva-soft.com>:
> Hi Takatoshi,
>
> Thank you for coming back to me so quickly.
>
> In the /var/lib/pgsql there are the following files:
>
> PSQL1:
> =====
> root at psql1:/var/lib/pgsql# ls -la
> total 16
> drwxr-xr-x 2 postgres postgres 4096 Nov 26 18:04 .
> drwxr-xr-x 35 root root 4096 Nov 25 22:21 ..
> -rw-r--r-- 1 postgres postgres 1 Nov 26 00:17 rep_mode.conf
> -rw-r--r-- 1 root root 49 Nov 26 18:04 xlog_note.0
>
> root at psql1:/var/lib/pgsql# cat xlog_note.0
> -e psql1 0000000019000000
> psql2 0000000019000000
> root at psql1:/var/lib/pgsql#
>
> PSQL2:
> =======
> root at psql2:/var/lib/pgsql# ls -la
> total 16
> drwxr-xr-x 2 postgres postgres 4096 Nov 26 18:05 .
> drwxr-xr-x 33 root root 4096 Nov 26 00:10 ..
> -rw-r--r-- 1 postgres postgres 1 Nov 26 00:24 rep_mode.conf
> -rw-r--r-- 1 root root 49 Nov 26 18:05 xlog_note.0
> root at psql2:/var/lib/pgsql# cat xlog_note.0
> -e psql1 0000000019000000
> psql2 0000000019000000
> root at psql2:/var/lib/pgsql#
It seems that dash's bultin echo command is used
because echo with "-e" option dose not function.
Perhaps my RA also depends on bash.
Can you use a bash instead of a dash?
> BTW, postgres is installed under /var/lib/postgresql , but I noticed that some parts of the RA are referring to the /var/lib/pgsql directory, so I created that directory and i keep some of the files there.
It's no ploblem.
If you want to change this path, please specify it using "tmpdir" parameter.
Regards,
Takatoshi MATSUO
>
> Thanks,
> Attila
>
>
>
> -----Original Message-----
> From: Takatoshi MATSUO [mailto:matsuo.tak at gmail.com]
> Sent: 2011. november 26. 18:27
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] Postgresql streaming replication failover - RA needed
>
> Hi Attila
>
> 1. Are there /var/lib/pgsql/xlog_note.0 , xlog_note.1, xlog_note.2 .... files?
> These files are created while checking a xlog location on monitor.
>
> 2. Do these files include lines as below?
> ---------
> pgsql1 0000000019000000
> pgsql2 0000000019000000
> ---------
>
> Regards.
> Takatoshi MATSUO
>
>
> 2011年11月26日22:44 Attila Megyeri <amegyeri at minerva-soft.com>:
>> Hi Yoshiharu, Takatoshi,
>>
>> Spent another day, without success. :(
>>
>> I started from scratch and synchronous replications works nicely when nodes are started outside pacemaker.
>> My PostgreSQL version is 9.1.1.
>>
>> When I start from pacemaker, after a while it gets into the following state:
>>
>> Online: [ psql1 psql2 ]
>>
>> Master/Slave Set: msPostgresql [postgresql]
>> Slaves: [ psql1 psql2 ]
>> Clone Set: clnPingCheck [pingCheck]
>> Started: [ psql1 psql2 ]
>>
>> Node Attributes:
>> * Node psql1:
>> + default_ping_set : 100
>> + master-postgresql:0 : -INFINITY
>> + pgsql-status : HS:alone
>> + pgsql-xlog-loc : 0000000019000000
>> * Node psql2:
>> + default_ping_set : 100
>> + master-postgresql:1 : -INFINITY
>> + pgsql-status : HS:alone
>> + pgsql-xlog-loc : 0000000019000000
>>
>>
>> The psql status queries return the following:
>>
>> PSQL1
>> ======
>> postgres at psql1:/root$ psql -c "select application_name,upper(state),upper(sync_state) from pg_stat_replication"
>> application_name | upper | upper
>> ------------------+-------+-------
>> (0 rows)
>>
>> postgres at psql1:/root$ psql -Atc "select pg_last_xlog_replay_location(),pg_last_xlog_receive_location()"
>> 0/19000020|0/19000000
>>
>> PSQL2
>> ======
>> postgres at psql2:~$ psql -c "select application_name,upper(state),upper(sync_state) from pg_stat_replication"
>> application_name | upper | upper
>> ------------------+-------+-------
>> (0 rows)
>>
>> postgres at psql2:~$ psql -Atc "select pg_last_xlog_replay_location(),pg_last_xlog_receive_location()"
>> 0/19000000|0/19000000
>>
>>
>> Neither server can connect (obviously) to the master, as the vip_repl Is not brought up.
>>
>>
>> Could you help me understand WHAT is the action/state/event that sould promote one of the nodes? I see that pacemaker monitors the servers every X seconds, but nothing else happens.
>>
>> In the log (limited to pgsql) the following sequence is repeated
>> forewer
>>
>> Nov 26 13:36:19 psql1 pgsql[19829]: INFO: Master is not exist.
>> Nov 26 13:36:19 psql1 pgsql[19829]: DEBUG: Checking right of master.
>> Nov 26 13:36:19 psql1 pgsql[19829]: INFO: My data status=.
>> Nov 26 13:36:19 psql1 pgsql[19829]: INFO: psql1 xlog location :
>> 0000000019000000 Nov 26 13:36:19 psql1 pgsql[19829]: INFO: psql2 xlog
>> location : 0000000019000000 Nov 26 13:36:26 psql1 pgsql[19993]: DEBUG: PostgreSQL is running as a hot standby.
>> Nov 26 13:36:26 psql1 pgsql[19993]: INFO: Master is not exist.
>> Nov 26 13:36:26 psql1 pgsql[19993]: DEBUG: Checking right of master.
>> Nov 26 13:36:26 psql1 pgsql[19993]: INFO: My data status=.
>> Nov 26 13:36:26 psql1 pgsql[19993]: INFO: psql1 xlog location :
>> 0000000019000000 Nov 26 13:36:26 psql1 pgsql[19993]: INFO: psql2 xlog
>> location : 0000000019000000 Nov 26 13:36:33 psql1 pgsql[20176]: DEBUG: PostgreSQL is running as a hot standby.
>> Nov 26 13:36:33 psql1 pgsql[20176]: INFO: Master is not exist.
>> Nov 26 13:36:33 psql1 pgsql[20176]: DEBUG: Checking right of master.
>> Nov 26 13:36:33 psql1 pgsql[20176]: INFO: My data status=.
>> Nov 26 13:36:33 psql1 pgsql[20176]: INFO: psql1 xlog location :
>> 0000000019000000 Nov 26 13:36:33 psql1 pgsql[20176]: INFO: psql2 xlog
>> location : 0000000019000000 Nov 26 13:36:41 psql1 pgsql[20343]: DEBUG: PostgreSQL is running as a hot standby.
>>
>>
>> Any help is appreciated!
>>
>> Regards,
>> Attila
>>
>>
>>
>>
>> -----Original Message-----
>> From: Yoshiharu Mori [mailto:y-mori at sraoss.co.jp]
>> Sent: 2011. november 25. 14:17
>> To: The Pacemaker cluster resource manager
>> Cc: Attila Megyeri
>> Subject: Re: [Pacemaker] Postgresql streaming replication failover -
>> RA needed
>>
>> Hi Attila
>>
>>> A quick snippet from the corosync.log
>>>
>>> Nov 23 05:43:05 psql1 pgsql[2845]: DEBUG: Checking right of master.
>>> Nov 23 05:43:05 psql1 pgsql[2845]: INFO: My data status=.
>>> Nov 23 05:43:05 psql1 pgsql[2845]: INFO: psql1 xlog location :
>>> 000000000D000000 Nov 23 05:43:05 psql1 pgsql[2845]: INFO: psql2 xlog
>>> location : 0000000008000000
>>>
>>> As you see, the "my data status" returns an empty string.
>>
>> My log is same. but it works.
>>
>> Nov 18 19:28:26 osspc24-1 pgsql[17350]: INFO: Master is not exist.
>> Nov 18 19:28:26 osspc24-1 pgsql[17350]: INFO: Checking right of master.
>> Nov 18 19:28:19 osspc24-1 pgsql[17138]: INFO: My data status=.
>> Nov 18 19:28:19 osspc24-1 pgsql[17138]: INFO: pm01 xlog location :
>> 0000000005000020 Nov 18 19:28:19 osspc24-1 pgsql[17138]: INFO: pm02
>> xlog location : 0000000005000000
>>
>> In my log, the following logs are outputted and started after checking xlog location(3 times).
>>
>> Nov 18 19:29:39 osspc24-1 pgsql[18720]: INFO: I have a master right.
>>
>> Please show us more corosync.log.
>>
>>
>>>
>>>
>>> -----Original Message-----
>>> From: Attila Megyeri [mailto:amegyeri at minerva-soft.com]
>>> Sent: 2011. november 25. 9:28
>>> To: The Pacemaker cluster resource manager
>>> Subject: Re: [Pacemaker] Postgresql streaming replication failover -
>>> RA needed
>>>
>>> Hi Takatoshi,
>>>
>>> I have restored the PSQL to run without corosync so I cannot send you the crm_mon output now.
>>>
>>> What I can tell for sure:
>>> - RA never promoted any of the nodes, no matter what the status was. It also did not promote the node, when it was the only one.
>>> - I believe the issue is in the comparison of the xlogs. How could I troubleshoot that? I see from the logs that crm NEVER tried to invoke pgsql with "promote"
>>> - I tried previously the crm_mon -A option, but there was never a "
>>> pgsql-data-status" attribute. The other attribs were there, including
>>> the HS:alone
>>> - In the corosync log the only relevant RA message I see is " Master is not exist. " I never saw a message like "My data is out-of-date"
>>>
>>> Thank you!
>>>
>>> Attila
>>>
>>>
>>> -----Original Message-----
>>> From: Takatoshi MATSUO [mailto:matsuo.tak at gmail.com]
>>> Sent: 2011. november 25. 8:56
>>> To: The Pacemaker cluster resource manager
>>> Subject: Re: [Pacemaker] Postgresql streaming replication failover -
>>> RA needed
>>>
>>> Hi Attila
>>>
>>> 2011/11/24 Attila Megyeri <amegyeri at minerva-soft.com>:
>>> > Hi Takatoshi, All,
>>> >
>>> > Thanks for your reply.
>>> > I see that you have invested significant effort in the development of the RA. I spent the last day trying to set up the RA, but without much success.
>>> >
>>> > My infrastructure is very similar to yours, except for the fact that currently I am testing with a single network adapter.
>>> >
>>> > Replication works nicely when I start the databases manually, not using corosync.
>>> >
>>> > When I try to start using corosync,I see that the ping resources start normally, but the msPostgresql starts on both nodes in slave mode, and I see "HS:alone"
>>>
>>> To see "HS:alone" is normal.
>>> And RA compares xlog locations and promote the postgresql having new data.
>>>
>>> > In the Wiki you state, the if I start on a signle node only, PSQL should start in Master mode (PRI), but this is not the case.
>>>
>>> If the data is old, the node can't be master.
>>> To be master needs pgsql-data-status="LATEST" or "STREAMING|SYNC".
>>> Plese check it using "crm_mon -A".
>>>
>>>
>>>
>>>
>>> And to become a master from stopped takes a few minutes because the RA compares xlog location on monitor.
>>>
>>>
>>> > The recovery.conf file is created immediately, and from the logs I see no attempt at all to promote the node.
>>> > In the postgres logs I see that node1, which is supposed to be a master, tries to connect to the vip-rep IP address, which is NOT brought up, because it depends on the Master role...
>>> >
>>> > Do you have any idea?
>>>
>>> Please check HA log.
>>> My RA outputs "My data is out-of-date. status=********" to log if the data is old.
>>>
>>> Regards,
>>> Takatoshi MATSUO
>>>
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org Getting started:
>>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>>>
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org Getting started:
>>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>>>
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org Getting started:
>>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>>
>>
>> --
>> Yoshiharu Mori <y-mori at sraoss.co.jp>
>> SRA OSS, Inc Japan http://www.sraoss.co.jp
>> TEL: 03-5979-2701
>> FAX: 03-5979-2702
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org Getting started:
>> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
More information about the Pacemaker
mailing list