[Pacemaker] Required resources for stateful clones (Serge Dubrouski)
Serge Dubrouski
sergeyfd at gmail.com
Fri May 20 14:08:34 UTC 2011
On Fri, May 20, 2011 at 8:04 AM, Eamon Roque <Eamon.Roque at lex-com.net>wrote:
>
> > On Fri, May 20, 2011 at 7:09 AM, Eamon Roque <Eamon.Roque at lex-com.net
> >wrote:
> >
> > >
> > > >
> > > > On Fri, May 20, 2011 at 3:42 AM, Eamon Roque <
> Eamon.Roque at lex-com.net
> > > >wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > >
> > > > > >> On Thu, May 19, 2011 at 5:05 AM, Eamon Roque <
> > > Eamon.Roque at lex-com.net
> > > > > >wrote:
> > > > >
> > > > > >> Hi,
> > > > > >>
> > > > > >> I've put together a cluster of two nodes running a databank
> without
> > > > > shared
> > > > > >> storage. Both nodes replicate data between them, which is taken
> care
> > > of
> > > > > by
> > > > > >> the databank itself.
> > > > > >>
> > > > > >> I have a resource for the databank and ip. I then created a
> stateful
> > > > > clone
> > > > > >> from the databank resource. I created colocation rules joining
> the
> > > > > >> databank-ms-clone and ip:
> > > > > >>
> > > > > >> node pgsqltest1
> > > > > >> node pgsqltest2
> > > > > >> primitive Postgres-IP ocf:heartbeat:IPaddr2 \
> > > > > >> params ip="10.19.57.234" cidr_netmask="32" \
> > > > > >> op monitor interval="30s" \
> > > > > >> meta is-managed="false"
> > > > > >> primitive resPostgres ocf:heartbeat:pgsql \
> > > > > >> params pgctl="/opt/PostgreSQL/9.0/bin/pg_ctl"
> > > > > >>pgdata="/opt/PostgreSQL/9.0/data"
> psql="/opt/PostgreSQL/9.0/bin/psql"
> > > > > >> pgdba="postgres" \
> > > > > >> op monitor interval="1min" \
> > > > > >> meta is-managed="false"
> > > > > >> ms msPostgres resPostgres \
> > > > > >> meta master-max="1" master-node-max="1" clone-max="2"
> > > > > >> clone-node-max="1" notify="true" target-role="started"
> > > > > >> colocation colPostgres inf: Postgres-IP msPostgres:Master
> > > > > >> order ordPostgres inf: msPostgres:promote Postgres-IP:start
> > > > > >> property $id="cib-bootstrap-options" \
> > > > > >>
> dc-version="1.1.2-2e096a41a5f9e184a1c1537c82c6da1093698eb5"
> > > \
> > > > > >> cluster-infrastructure="openais" \
> > > > > >> expected-quorum-votes="2" \
> > > > > >> stonith-enabled="false" \
> > > > > >> no-quorum-policy="ignore" \
> > > > > >> last-lrm-refresh="1302707146"
> > > > > >> rsc_defaults $id="rsc-options" \
> > > > > >> resource-stickiness="200"
> > > > > >> op_defaults $id="op_defaults-options" \
> > > > > >> record-pending="false"
> > > > > >>
> > > > > >> The normal postgres agent doesn't support this functionality,
> but
> > > I've
> > > > > put
> > > > > >> together my own using the mysql agent as a model. Before running
> the
> > > > > script
> > > > > >> through ocf-tester, I unmanage the postgres resource.
> > > > > >>
> > > > >
> > > > > > Could you show how you implemented promote/demote for pgsql?
> > > > >
> > > > > Sure, let's start with the ultra-simple "promote" function:
> > > > >
> > > > > #
> > > > > # These variables are higher up in the file, but they will probably
> > > help
> > > > > with understanding the error of
> > > > > # my ways.
> > > > >
> > > > > CRM_MASTER="${HA_SBIN_DIR}/crm_master"
> > > > > ATTRD_UPDATER="${HA_SBIN_DIR}/attrd_updater"
> > > > >
> > > > > pgsql_promote() {
> > > > > local output
> > > > > local rc
> > > > > local CHECK_PG_SQL
> > > > > local COMPLETE_STANDBY_QUERY
> > > > > local PROMOTE_SCORE_HIGH
> > > > > local MOD_PSQL_M_FORMAT
> > > > >
> > > > >
> > > > > PROMOTE_SCORE_HIGH=1000
> > > > > CHECK_PG_SQL="SELECT pg_is_in_recovery()"
> > > > > MOD_PSQL_M_FORMAT="$OCF_RESKEY_psql -Atc"
> > > > > COMPLETE_STANDBY_QUERY="$MOD_PSQL_M_FORMAT
> \"$CHECK_PG_SQL\""
> > > > >
> > > > > output=$(su - $OCF_RESKEY_pgdba -c
> "$COMPLETE_STANDBY_QUERY"
> > > 2>&1)
> > > > > echo $output
> > > > >
> > > > > rc=$?
> > > > >
> > > > > case $output in
> > > > > f)
> > > > > ocf_log debug "PostgreSQL Node is running
> in
> > > Master
> > > > > mode..."
> > > > > return $OCF_RUNNING_MASTER
> > > > > ;;
> > > > >
> > > > > t)
> > > > > ocf_log debug "PostgreSQL Node is in
> > > Hot_Standby
> > > > > mode..."
> > > > > return $OCF_SUCCESS
> > > > > ;;
> > > > >
> > > > > *)
> > > > > ocf_log err "Critical error in
> $CHECK_PG_SQL:
> > > > > $output"
> > > > > return $OCF_ERR_GENERIC
> > > > > ;;
> > > > > esac
> > > > >
> > > > > #
> > > > > # "Real" promotion is handled here.
> > > > > # The trigger file is created and we check for "recovery.conf" on
> the
> > > host.
> > > > > # If we can't find it, then the file will be copied from the
> HA-Config
> > > into
> > > > > postgres' data folder.
> > > > > #
> > > > >
> > > > > if ! touch $OCF_RESKEY_trigger_file; then
> > > > > ocf_log err "$OCF_RESKEY_trigger_file could not be
> created!"
> > > > > return $OCF_ERR_GENERIC
> > > > > fi
> > > > >
> > > > > if [ ! -f $OCF_RESKEY_recovery_conf ]; then
> > > > > ocf_log err "$OCF_RESKEY_recovery_conf doesn't exist!"
> > > > > cp $OCF_RESKEY_recovery_conf_ersatz $OCF_RESKEY_pgdata
> > > > > return $OCF_SUCCESS
> > > > > fi
> > > >
> > > >
> > > > Why do you need this? As far as I know when you switch standby
> database
> > > to
> > > > primary using trigger file recovery.conf gets renamed to
> recovery.done.
> > > If
> > > > you rename it back DB will be put into standby mode after restart.We
> are
> > > > talking about streaming replication, right?
> > > >
> > > >
> > > Right. The order is wrong. According to the Binary Replication tutorial
> on
> > > the postgres wiki, when I perform a failover with a trigger file, it
> wants
> > > to find a "recovery.conf", which it then processes (checking the
> archive for
> > > missing updates etc.) and renames (after noticing the trigger file).
> > >
> > > I assumed that this would work in exactly the same way with Streaming
> > > Replication.
> > >
> > > Am I wrong?
> >
> >
> > I think so. You have to have recovery.conf when you start your standby,
> not
> > master. Actually instance that has recovery.conf always tries to start as
> > standby. You have to have master's IP address there and path to archived
> log
> > files.
> >
> >
>
> So the failover behavior in binary replication and streaming replication is
> different? Or is the wiki entry just antiquated?
>
This is correct: http://wiki.postgresql.org/wiki/Streaming_Replication
>
>
> > >
> > >
> > > > >
> > > > >
> > > > > # If both file exist or can be created, then the failover fun can
> > > start.
> > > > >
> > > > > ocf_log info "$OCF_RESKEY_trigger_file was created."
> > > > > ocf_log info "$OCF_RESKEY_recovery_conf exists and can be copied to
> the
> > > > > correct location."
> > > > >
> > > > > # Sometimes, the master needs a bit of time to take the reins.
> So...
> > > > >
> > > > > while :
> > > > > do
> > > > > pgsql_monitor warn
> > > > > rc=$?
> > > > >
> > > > > if [ $rc -eq $OCF_RUNNING_MASTER ]; then
> > > > > break;
> > > > > fi
> > > > >
> > > > > ocf_log debug "Postgres Server could not be promoted.
> Please
> > > > > wait..."
> > > > >
> > > > > sleep 1
> > > > >
> > > > > done
> > > > >
> > > > > ocf_log info "Postgres Server has been promoted. Please check on
> the
> > > > > previous master."
> > > > >
> > > > > #################################
> > > > > #Attributes Update: #
> > > > > #################################
> > > > >
> > > > > $ATTRD_UPDATER -n $PGSQL_STATUS_NAME -v \"PRI\" || exit $(echo "Eh!
> > > > > Attrd_updater is not working!")
> > > > >
> > > > > #############################################
> > > > > # Resource stickiness pumped up to 1000 : #
> > > > > #############################################
> > > > >
> > > > > $CRM_MASTER -v $PROMOTE_WERT_HOCH || exit $(echo "crm_master could
> not
> > > > > change the Master's status!")
> > > > >
> > > > > ############
> > > > > # Success! #
> > > > > ############
> > > > >
> > > > > return $OCF_SUCCESS
> > > > >
> > > > > }
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> ######################################################################################################
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > > And what about demote? Switching standby into primary using trigger
> files
> > > > changes TIMELINE in the DB and that invalidates all other standby
> > > databases
> > > > as well as previous master database. After that you have to restore
> them
> > > > from a fresh backup made on new master. This particular behavior
> stopped
> > > me
> > > > from implementing Master/Slave functionality in pgsql RA so far.
> > > >
> > > > BTW, why pgsql is set to is-managed="false" in your
> configuration.With
> > > this
> > > > setting cluster will keep monitoring it but won't take any other
> actions
> > > > AFAIK.
> > >
> > > Demote? Well, seeing as neither promote nor demote actually worked for
> me,
> > > I thought I would start small.
> > >
> >
> > It doesn't work because you have it in unmanaged state I think.
> >
>
> I'm using the ocf-tester utility to test the agent. Won't there be a
> conflict if I try and have the cluster manage the resources and then try and
> wrest it's control away with my own testing agent?
>
>
> >
> > >
> > > As far as the trigger file switching goes, you're of course completely
> > > right. This behavior isn't really a big deal in my environment, as it's
> > > meant as more of test and we want to bring back the demoted servers up
> > > manually, but I can see that it would cause a lot of problems in a more
> >
> >
> > That means that demote operation should stop master server which isn't
> the
> > best behavior IMHO.
> >
>
> I don't disagree. This was the policy that was "agreed" upon, so it's more
> of a political issue, really.
>
> Would you prefer putting it into RO mode?
>
> >
> >
> > > complex environment. When I tested the failover functionality without
> > > pacemaker, I have to perform a fresh backup even if I waited less than
> 30s
> > > to bring the old master back up as a standby.
> > >
> > > I guess that with 9.1 this will be easier...
> > >
> > > I unmanaged the resources so that my test agent would handle them. Is
> this
> > > incorrect?
> > >
> >
> > Again I think you are wrong. In this mode pacemaker won't call your RA to
> > promote/demote or failover your resource.
> >
> >
> > >
> > >
> > > >
> > > >
> > > > ?amon
> > > > >
> > > > >
> > > > >
> > > > > >> Unfortunately, promote/demote doesn't work. ocf-tester tries to
> use
> > > the
> > > > > >> "crm_attribute -N pgsql1 -n master-pgrql-replication-agent -l
> reboot
> > > -v
> > > > > >> 100", but the (unmanaged) resources don't accept the score
> change.
> > > > > >>
> > > > > >> I'm pretty sure that I just need to be hit with a clue stick and
> > > would
> > > > > be
> > > > > >> grateful for any help.
> > > > > >>
> > > > > >> Thanks,
> > > > > >>
> > > > > >> ?amon
> > > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Serge Dubrouski.
> > > > > _______________________________________________
> > > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > > >
> > > > > Project Home: http://www.clusterlabs.org
> > > > > Getting started:
> > > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > > Bugs:
> > > > >
> > >
> http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > >
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > Serge Dubrouski.
> > > > -------------- next part --------------
> > > > An HTML attachment was scrubbed...
> > > > URL: <http://oss.clusterlabs.org/pipermail/pacemaker/attachments/
> > > > 20110520/e1f26230/attachment.html>
> > > >
> > > > ------------------------------
> > >
> > > >
> > > > _______________________________________________
> > > > Pacemaker mailing list
> > > > Pacemaker at oss.clusterlabs.org
> > > >
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > >
> > > >
> > > > End of Pacemaker Digest, Vol 42, Issue 53
> > > > *****************************************
> > >
> > > _______________________________________________
> > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > >
> > > Project Home: http://www.clusterlabs.org
> > > Getting started:
> http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > Bugs:
> > >
> http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > >
> > >
> >
> >
> > --
> > Serge Dubrouski.
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://oss.clusterlabs.org/pipermail/pacemaker/attachments/
> > 20110520/19777245/attachment.html>
> >
> > ------------------------------
> >
> > _______________________________________________
> > Pacemaker mailing list
> > Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> >
> > End of Pacemaker Digest, Vol 42, Issue 55
> > *****************************************
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs:
> http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>
>
--
Serge Dubrouski.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20110520/77a2e1fe/attachment.htm>
More information about the Pacemaker
mailing list