[Pacemaker] Failover when storage fails
Max Williams
Max.Williams at betfair.com
Fri May 13 08:54:40 UTC 2011
Well this is not what I am seeing here. Perhaps a bug?
I also tried adding "op stop interval=0 timeout=10" to the LVM resources but still when the storage disappears the cluster just stops where it is and those log entries (below) just get printed in a loop.
Cheers,
Max
-----Original Message-----
From: Tim Serong [mailto:tserong at novell.com]
Sent: 13 May 2011 04:22
To: The Pacemaker cluster resource manager (pacemaker at oss.clusterlabs.org)
Subject: Re: [Pacemaker] Failover when storage fails
On 5/12/2011 at 02:28 AM, Max Williams <Max.Williams at betfair.com> wrote:
> After further testing even with stonith enabled the cluster still gets
> stuck in this state, presumably waiting on IO. I can get around it by
> setting "on-fail=fence" on the LVM resources but shouldn't Pacemaker
> be smart enough to realise the host is effectively offline?
If you've got STONITH enabled, nodes should just get fenced when this occurs, without your having to specify on-fail=fence for the monitor op.
What *should* happen is, the monitor fails or times out, then pacemaker will try to stop the resource. If the stop also fails or times out, the node will be fenced. See:
http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Pacemaker_Explained/s-resource-operations.html
Also, http://ourobengr.com/ha#causes is relevant here.
Regards,
Tim
> Or am I missing some timeout
> value that would fix this situation?
>
> pacemaker-1.1.2-7.el6.x86_64
> corosync-1.2.3-21.el6.x86_64
> RHEL 6.0
>
> Config:
>
> node host001.domain \
> attributes standby="off"
> node host002.domain \
> attributes standby="off"
> primitive MyApp_IP ocf:heartbeat:IPaddr \
> params ip="192.168.104.26" \
> op monitor interval="10s"
> primitive MyApp_fs_graph ocf:heartbeat:Filesystem \
> params device="/dev/VolGroupB00/AppLV2" directory="/naab1"
> fstype="ext4" \
> op monitor interval="10" timeout="10"
> primitive MyApp_fs_landing ocf:heartbeat:Filesystem \
> params device="/dev/VolGroupB01/AppLV1" directory="/naab2"
> fstype="ext4" \
> op monitor interval="10" timeout="10"
> primitive MyApp_lvm_graph ocf:heartbeat:LVM \
> params volgrpname="VolGroupB00" exclusive="yes" \
> op monitor interval="10" timeout="10" on-fail="fence" depth="0"
> primitive MyApp_lvm_landing ocf:heartbeat:LVM \
> params volgrpname="VolGroupB01" exclusive="yes" \
> op monitor interval="10" timeout="10" on-fail="fence" depth="0"
> primitive MyApp_scsi_reservation ocf:heartbeat:sg_persist \
> params sg_persist_resource="scsi_reservation0" devs="/dev/dm-6
> /dev/dm-7" required_devs_nof="2" reservation_type="1"
> primitive MyApp_init_script lsb:AppInitScript \
> op monitor interval="10" timeout="10"
> primitive fence_host001.domain stonith:fence_ipmilan \
> params ipaddr="192.168.16.148" passwd="password" login="root"
> pcmk_host_list="host001.domain" pcmk_host_check="static-list" \
> meta target-role="Started"
> primitive fence_host002.domain stonith:fence_ipmilan \
> params ipaddr="192.168.16.149" passwd="password" login="root"
> pcmk_host_list="host002.domain" pcmk_host_check="static-list" \
> meta target-role="Started"
> group MyApp_group MyApp_lvm_graph MyApp_lvm_landing MyApp_fs_graph
> MyApp_fs_landing MyApp_IP MyApp_init_script \
> meta target-role="Started" migration-threshold="2" on-fail="restart"
> failure-timeout="300s"
> ms ms_MyApp_scsi_reservation MyApp_scsi_reservation \
> meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1"
> notify="true"
> colocation MyApp_group_on_scsi_reservation inf: MyApp_group
> ms_MyApp_scsi_reservation:Master order
> MyApp_group_after_scsi_reservation inf:
> ms_MyApp_scsi_reservation:promote MyApp_group:start property
> $id="cib-bootstrap-options" \
> dc-version="1.1.2-f059ec7ced7a86f18e5490b67ebf4a0b963bccfe" \
> cluster-infrastructure="openais" \
> expected-quorum-votes="2" \
> no-quorum-policy="ignore" \
> stonith-enabled="true" \
> last-lrm-refresh="1305129673"
> rsc_defaults $id="rsc-options" \
> resource-stickiness="1"
>
>
>
>
>
> From: Max Williams [mailto:Max.Williams at betfair.com]
> Sent: 11 May 2011 13:55
> To: The Pacemaker cluster resource manager
> (pacemaker at oss.clusterlabs.org)
> Subject: [Pacemaker] Failover when storage fails
>
> Hi,
> I want to configure pacemaker to failover a group of resources and
> sg_persist (master/slave) when there is a problem with the storage but
> when I cause the iSCSI LUN to disappear simulating a failure, the
> cluster always gets stuck in this state:
>
> Last updated: Wed May 11 10:52:43 2011
> Stack: openais
> Current DC: host001.domain - partition with quorum
> Version: 1.1.2-f059ec7ced7a86f18e5490b67ebf4a0b963bccfe
> 2 Nodes configured, 2 expected votes
> 4 Resources configured.
> ============
>
> Online: [ host002.domain host001.domain ]
>
> fence_host002.domain (stonith:fence_ipmilan): Started
> host001.domain
> fence_host001.domain (stonith:fence_ipmilan): Started
> host001.domain
> Resource Group: MyApp_group
> MyApp_lvm_graph (ocf::heartbeat:LVM): Started host002.domain
> FAILED
> MyApp_lvm_landing (ocf::heartbeat:LVM): Started host002.domain
> FAILED
> MyApp_fs_graph (ocf::heartbeat:Filesystem): Started
> host002.domain
> MyApp_fs_landing (ocf::heartbeat:Filesystem): Started
> host002.domain
> MyApp_IP (ocf::heartbeat:IPaddr): Stopped
> MyApp_init_script (lsb:abworkload): Stopped
> Master/Slave Set: ms_MyApp_scsi_reservation
> Masters: [ host002.domain ]
> Slaves: [ host001.domain ]
>
> Failed actions:
> MyApp_lvm_graph_monitor_10000 (node=host002.domain, call=129,
> rc=-2, status=Timed Out): unknown exec error
> MyApp_lvm_landing_monitor_10000 (node=host002.domain, call=130,
> rc=-2, status=Timed Out): unknown exec error
>
> This is printed over and over in the logs:
>
> May 11 12:34:56 host002 lrmd: [2561]: info: perform_op:2884: operation
> stop[202] on ocf::Filesystem::MyApp_fs_graph for client 31850, its
> parameters: fstype=[ext4] crm_feature_set=[3.0.2]
> device=[/dev/VolGroupB00/abb_graph] CRM_meta_timeout=[20000]
> directory=[/naab1] for rsc is already running.
> May 11 12:34:56 host002 lrmd: [2561]: info: perform_op:2894:
> postponing all ops on resource MyApp_fs_graph by 1000 ms May 11
> 12:34:57 host002 lrmd: [2561]: info: perform_op:2884: operation
> stop[202] on ocf::Filesystem::MyApp_fs_graph for client 31850, its
> parameters: fstype=[ext4] crm_feature_set=[3.0.2]
> device=[/dev/VolGroupB00/abb_graph] CRM_meta_timeout=[20000]
> directory=[/naab1] for rsc is already running.
> May 11 12:34:57 host002 lrmd: [2561]: info: perform_op:2894:
> postponing all ops on resource MyApp_fs_graph by 1000 ms May 11
> 12:34:58 host002 lrmd: [2561]: info: perform_op:2884: operation
> stop[202] on ocf::Filesystem::MyApp_fs_graph for client 31850, its
> parameters: fstype=[ext4] crm_feature_set=[3.0.2]
> device=[/dev/VolGroupB00/abb_graph] CRM_meta_timeout=[20000]
> directory=[/naab1] for rsc is already running.
> May 11 12:34:58 host002 lrmd: [2561]: info: perform_op:2894:
> postponing all ops on resource MyApp_fs_graph by 1000 ms May 11
> 12:34:58 host002 lrmd: [2561]: WARN: MyApp_lvm_graph:monitor process
> (PID 1938) timed out (try 1). Killing with signal SIGTERM (15).
> May 11 12:34:58 host002 lrmd: [2561]: WARN: MyApp_lvm_landing:monitor
> process (PID 1939) timed out (try 1). Killing with signal SIGTERM (15).
> May 11 12:34:58 host002 lrmd: [2561]: WARN: operation monitor[190] on
> ocf::LVM::MyApp_lvm_graph for client 31850, its parameters:
> CRM_meta_depth=[0] depth=[0] exclusive=[yes] crm_feature_set=[3.0.2]
> volgrpname=[VolGroupB00] CRM_meta_on_fail=[standby]
> CRM_meta_name=[monitor] CRM_meta_interval=[10000]
> CRM_meta_timeout=[10000] : pid [1938] timed out May 11 12:34:58
> host002 lrmd: [2561]: WARN: operation monitor[191] on ocf::LVM::MyApp_lvm_landing for client 31850, its parameters:
> CRM_meta_depth=[0] depth=[0] exclusive=[yes] crm_feature_set=[3.0.2]
> volgrpname=[VolGroupB01] CRM_meta_on_fail=[standby]
> CRM_meta_name=[monitor] CRM_meta_interval=[10000]
> CRM_meta_timeout=[10000] : pid [1939] timed out May 11 12:34:58
> host002 crmd: [31850]: ERROR: process_lrm_event: LRM operation
> MyApp_lvm_graph_monitor_10000 (190) Timed Out (timeout=10000ms) May 11
> 12:34:58 host002 crmd: [31850]: ERROR: process_lrm_event: LRM
> operation MyApp_lvm_landing_monitor_10000 (191) Timed Out
> (timeout=10000ms) May 11 12:34:59 host002 lrmd: [2561]: info:
> perform_op:2884: operation stop[202] on
> ocf::Filesystem::MyApp_fs_graph for client 31850, its
> parameters: fstype=[ext4] crm_feature_set=[3.0.2]
> device=[/dev/VolGroupB00/abb_graph] CRM_meta_timeout=[20000]
> directory=[/naab1] for rsc is already running.
> May 11 12:34:59 host002 lrmd: [2561]: info: perform_op:2894:
> postponing all ops on resource MyApp_fs_graph by 1000 ms
>
> And I noticed there are about 100 vgdisplay processes running in D state.
>
> How can I configure Pacemaker so the other host forces sg_persist to
> be a master and then just takes the whole resource group without fencing?
>
> I've tried "on-fail=standby" or "migration-threshold=0" but it just
> always gets stuck in this state. If I reconnect the LUN everything
> resumes and it instantly fails over but this is less than ideal.
>
> Thanks,
> Max
>
>
>
>
>
>
>
> ______________________________________________________________________
> __ In order to protect our email recipients, Betfair Group use SkyScan
> from MessageLabs to scan all Incoming and Outgoing mail for viruses.
>
> ______________________________________________________________________
> __
>
> ______________________________________________________________________
> __ In order to protect our email recipients, Betfair Group use SkyScan
> from MessageLabs to scan all Incoming and Outgoing mail for viruses.
>
> ______________________________________________________________________
> __
--
Tim Serong <tserong at novell.com>
Senior Clustering Engineer, OPS Engineering, Novell Inc.
_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker
Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
________________________________________________________________________
In order to protect our email recipients, Betfair Group use SkyScan from
MessageLabs to scan all Incoming and Outgoing mail for viruses.
________________________________________________________________________
More information about the Pacemaker
mailing list