[Pacemaker] IPMI
jiaju liu
liujiaju86 at yahoo.com.cn
Wed May 25 05:40:46 UTC 2011
Hi,
25.05.2011 03:49, jiaju liu wrote:
>
> > > Hi,
> > >
> > > On Tue, May 24, 2011 at 03:31:01PM +0800, jiaju liu wrote:
> > >>
> > >> HI all I use ipmi as stonith resource. the interface I use
> lanplus first, however, it doesn't work. I check log,it shows nodea
> external/ipmi[3433]: ERROR: error executing
> > >> ipmitool: Error: Unable to establish IPMI v2 / RMCP+ session^M
> Unable to
> > >> get Chassis Power Status
> > >>
> > >> so I change interface to open, so ipmi works, will it influence
> stonith resource work?
> > >
> > > If ipmitool works then the stonith resource will work too. Best
> > > to check documentation for your fencing device and its IPMI
> > > implementation.
> >
>
> > 'open' IPMI interface is a local interface. Usually it is able to
> > interact only with a local BMC, thus it is only possible to fence
> a node
> > on which fencing agent runs. Probably this is not what is wanted.
>
> Thank you for your reply I have already find it fence the node which
> IPMI implementation when I use open interface. The lanplus interface
> works unstable, sometimes the node could not get power status by
> lanplus, I should reboot BMC,
>Do you have your BMC connected to a big ethernet segment?
>They a quite limited in what concerns ARP table size.
>So, I always prefer to have separate segments or vlans for them.
>I had same problems with Tyan's BMC, and moving it to internal vlan did
>a trick.
I will try,Thank you
>
>
> >Oh, good to know. That's definitely not useful for fencing. BTW,
> >I think this is the first time I hear somebody reports lanplus
> >not working. What kind of device is this?
>
> super micro BMC
I use both standalone SIMSO+ and integrated lantronix-based ones with
success.
Vladislav
------------------------------
_______________________________________________
Pacemaker mailing list
Pacemaker at oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker
End of Pacemaker Digest, Vol 42, Issue 63
*****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20110525/3e092e32/attachment-0003.html>
More information about the Pacemaker
mailing list