[Pacemaker] Problem with rrp_mode

[Michael Schwartzkopff]

Hi,

I have two network cards and configured corosync-1.2.7 with
rrp_mode: active

at first corosync-cfg -s tells me
Printing ring status.
Local node ID 1210452490
RING ID 0
	id	= 10.10.38.72
	status	= ring 0 active with no faults
RING ID 1
	id	= 10.10.40.115
	status	= ring 1 active with no faults

after a very short time I see the following:

RING ID 1
	id	= 10.10.40.115
	status	= Incrementing problem counter for seqid 1352 iface 
10.10.40.115 to [3 of 10]

and finally:
RING ID 1
	id	= 10.10.40.115
	status	= Marking seqid 1390 ringid 1 interface 10.10.40.115 FAULTY - 
adminisrtative intervention required.

Anybody being successful at all using rrp_mode with corosync?

Greetings.

-- 
Dr. Michael Schwartzkopff
Guardinistr. 63
81375 München

Tel: (0163) 172 50 98
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://oss.clusterlabs.org/pipermail/pacemaker/attachments/20110119/e1c97082/attachment.sig>