[Pacemaker] pacemaker won't start mysql in the second node

Bart Coninckx bart.coninckx at telenet.be
Tue Feb 1 19:44:29 UTC 2011 

Novell will not support you unless you use SLES, same for Redhat and
RHEL. Not sure about IBM, but they are $$$. So the wonderful people of
Linbit seem a good choice.




On 02/01/11 18:20, Liang.Ma at asc-csa.gc.ca wrote:
> Hi There,
> 
> I think we should seek professional help. Since the clusters we are going to build contain components such as heartbeat, corosync, pacemaker, drbd and ocfs2 or gfs2. And also I know there are quite a few companies who provide the support. So anyone has any suggestion, IBM, Redhat, Novell, or linbit?
> 
> Thanks in advance.  
> 
> Liang Ma
> Contractuel | Consultant | SED Systems Inc. 
> Ground Systems Analyst
> Agence spatiale canadienne | Canadian Space Agency
> 6767, Route de l'Aéroport, Longueuil (St-Hubert), QC, Canada, J3Y 8Y9
> Tél/Tel : (450) 926-5099 | Téléc/Fax: (450) 926-5083
> Courriel/E-mail : [liang.ma at space.gc.ca]
> Site web/Web site : [www.space.gc.ca ] 
> 
> 
> 
> 
> -----Original Message-----
> From: Ma, Liang 
> Sent: January 31, 2011 10:48 AM
> To: 'The Pacemaker cluster resource manager'
> Subject: RE: [Pacemaker] pacemaker won't start mysql in the second node
> 
> Sorry for sending this again. The log format was a bit messy in the previous one. 
> 
> Thanks for your hints. I went through the cluster logs more carefully. By comparing the logs from the two nodes, the real different is after the line 
> 
> info: process_lrm_event: LRM operation fs_mysql_start_0
> 
> On node arsvr1, after that line we got a confirmation on Action fs_mysql_start_0 as such
> 
> info: match_graph_event: Action fs_mysql_start_0 (8) confirmed on arsvr1
> 
> and then went on to Initiating action 9: start mysql_start_0 on arsvr1 (local).
> 
> However on node arsvr2, we never see the confirmation from Action fs_mysql_start_0. So mysql_start_0 is never called. But the strange thing is, I can see the drbd partition of fs_mysql is properly mounted on arsvr2. Anyone knows what might stop arsvr2 to run that Action fs_mysql_start_0 (8) confirmed?
> 
> Thanks in advance.
> 
> Here are the logs from the two nodes.
> 
> Logs on Node 2:
> 
> Jan 28 14:24:23 arsvr2 lrmd: [919]: info: rsc:fs_mysql:229: start 
> Jan 28 14:24:23 arsvr2 Filesystem[1568]: [1596]: INFO: Running start for /dev/drbd/by-res/r0 on /var/lib/mysql 
> Jan 28 14:24:23 arsvr2 lrmd: [919]: info: RA output: (fs_mysql:start:stderr) FATAL: Module scsi_hostadapter not found.
> Jan 28 14:24:23 arsvr2 Filesystem[1568]: [1606]: INFO: Starting filesystem check on /dev/drbd/by-res/r0 
> Jan 28 14:24:23 arsvr2 lrmd: [919]: info: RA output: (fs_mysql:start:stdout) fsck from util-linux-ng 2.17.2 
> Jan 28 14:24:23 arsvr2 lrmd: [919]: info: RA output:(fs_mysql:start:stdout) /dev/drbd0: clean, 178/3276800 files, 257999/13106791 blocks
> Jan 28 14:24:23 arsvr2 crmd: [922]: info: process_lrm_event: LRM operation fs_mysql_start_0 (call=229, rc=0, cib-update=251,confirmed=true) ok
> Jan 28 14:24:46 arsvr2 cib: [918]: info: cib_stats: Processed 149 operations (0.00us average, 0% utilization) in the last 10min
> 
> Logs on Node 1:
> 
> Jan 28 14:28:58 arsvr1 lrmd: [1065]: info: rsc:fs_mysql:867: start 
> Jan 28 14:28:58 arsvr1 crmd: [1068]: info: te_rsc_command: Initiating action 31: monitor drbd_mysql:1_monitor_15000 on arsvr2 
> Jan 28 14:28:58 arsvr1 Filesystem[516]: [544]: INFO: Running start for /dev/drbd/by-res/r0 on /var/lib/mysql 
> Jan 28 14:28:58 arsvr1 lrmd: [1065]: info: RA output:(fs_mysql:start:stderr) FATAL: Module scsi_hostadapter not found.
> Jan 28 14:28:58 arsvr1 Filesystem[516]: [554]: INFO: Starting filesystem check on /dev/drbd/by-res/r0 
> Jan 28 14:28:58 arsvr1 lrmd: [1065]: info: RA output:(fs_mysql:start:stdout) fsck from util-linux-ng 2.17.2 
> Jan 28 14:28:58 arsvr1 lrmd: [1065]: info: RA output:(fs_mysql:start:stdout) /dev/drbd0: clean, 178/3276800 files,257999/13106791 blocks
> Jan 28 14:28:58 arsvr1 crmd: [1068]: info: process_lrm_event: LRM operation fs_mysql_start_0 (call=867, rc=0, cib-update=1650,confirmed=true) ok
> Jan 28 14:28:58 arsvr1 crmd: [1068]: info: match_graph_event: Action fs_mysql_start_0 (8) confirmed on arsvr1 (rc=0) 
> Jan 28 14:28:58 arsvr1 crmd: [1068]: info: te_rsc_command: Initiating action 9: start mysql_start_0 on arsvr1 (local) 
> Jan 28 14:28:58 arsvr1 crmd: [1068]: info: do_lrm_rsc_op: Performing key=9:551:0:9c402121-906c-42de-a18a-68deb24208cb op=mysql_start_0 ) 
> Jan 28 14:28:58 arsvr1 lrmd: [1065]: info: rsc:mysql:868: start 
> Jan 28 14:28:58 arsvr1 mysqld_safe: Starting mysqld daemon with databases from /var/lib/mysql 
> Jan 28 14:28:59 arsvr1 crmd: [1068]: info: match_graph_event: Action drbd_mysql:1_monitor_15000 (31) confirmed on arsvr2 (rc=0) 
> Jan 28 14:29:02 arsvr1 mysql[576]: [728]: INFO: MySQL started 
> Jan 28 14:29:02 arsvr1 crmd: [1068]: info: process_lrm_event: LRM operation mysql_start_0 (call=868, rc=0, cib-update=1651,confirmed=true) ok
> Jan 28 14:29:02 arsvr1 crmd: [1068]: info: match_graph_event: Action mysql_start_0 (9) confirmed on arsvr1 (rc=0) 
> 
> 
> Liang Ma
> Contractuel | Consultant | SED Systems Inc. 
> Ground Systems Analyst
> Agence spatiale canadienne | Canadian Space Agency
> 6767, Route de l'Aéroport, Longueuil (St-Hubert), QC, Canada, J3Y 8Y9
> Tél/Tel : (450) 926-5099 | Téléc/Fax: (450) 926-5083
> Courriel/E-mail : [liang.ma at space.gc.ca]
> Site web/Web site : [www.space.gc.ca ] 
> 
> 
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Dejan Muhamedagic [mailto:dejanmm at fastmail.fm] 
> Sent: January 28, 2011 11:09 AM
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] pacemaker won't start mysql in the second node
> 
> On Fri, Jan 28, 2011 at 08:50:45AM -0500, Liang.Ma at asc-csa.gc.ca wrote:
>> Hi Dejan, thanks for your reply.
>>
>> That's one of the problem. I don't see any logs in log file /var/log/mysql/error.log.
> 
> I meant the cluster logs.
> 
>> I checked the permission of directories /var/run/mysqld and /var/log/mysql. In both nodes they are the same as
>>
>> drwxr-xr-x 2 mysql root 40 2011-01-27 13:50 /var/run/mysqld/
>> drwxr-s--- 2 mysql adm 4096 2011-01-27 11:34 /var/log/mysql
>>
>> By the way, under which user pacemaker runs, root or someone else?
> 
> pacemaker is a collection of programs. At any rate, the RA run
> as root, but may su to another user (mysql) depending on the
> resource configuration.
> 
> Thanks,
> 
> Dejan
> 
>> Liang Ma
>> Contractuel | Consultant | SED Systems Inc. 
>> Ground Systems Analyst
>> Agence spatiale canadienne | Canadian Space Agency
>> 6767, Route de l'Aéroport, Longueuil (St-Hubert), QC, Canada, J3Y 8Y9
>> Tél/Tel : (450) 926-5099 | Téléc/Fax: (450) 926-5083
>> Courriel/E-mail : [liang.ma at space.gc.ca]
>> Site web/Web site : [www.space.gc.ca ] 
>>
>>
>>
>>
>> -----Original Message-----
>> From: Dejan Muhamedagic [mailto:dejanmm at fastmail.fm] 
>> Sent: January 28, 2011 8:26 AM
>> To: The Pacemaker cluster resource manager
>> Subject: Re: [Pacemaker] pacemaker won't start mysql in the second node
>>
>> Hi,
>>
>> On Thu, Jan 27, 2011 at 11:51:31AM -0500, Liang.Ma at asc-csa.gc.ca wrote:
>>>
>>>
>>> Hi There,
>>>
>>> I have set up a pair of ha LAMP servers using heartbeat, pacemaker and
>>> drbd on Ubuntu 10.04 LTS. Everything works fine until I upgraded
>>> mysql-server from 5.1.41-3ubuntu12.6 to 5.1.41-3ubuntu12.9. Now node 1
>>> (arsvr1) works still fine, but mysql on node 2 (arsvr2) won't start
>>> when I switch arsvr1 standby. The error message shown from "crm
>>> status" is
>>>
>>> Failed actions:
>>> mysql_start_0 (node=arsvr2, call=32, rc=4, status=complete):
>>> insufficient privileges
>>>
>>> No errors logged in /var/log/mysql/error.log at all.
>>
>> I think that you should check directory permissions. The log
>> file should give you a hint.
>>
>> Thanks,
>>
>> Dejan
>>
>>
>>> drbd mysql partition mounted properly. If I go to
>>> /usr/lib/ocf/resource.d/heartbeat and set the OCF_RESKEY parameters, I
>>> have no problem to start mysql server by "./mysql start". But the
>>> resource mysql won't show up in crm status.
>>>
>>> So looks somehow pacemaker fail to start resource mysql even before
>>> running the resource script.
>>>
>>> Here is the configuration
>>>
>>> node $id="bc6bf61d-6b5f-4307-85f3-bf7bb11531bb" arsvr2 \
>>> 	attributes standby="off"
>>> node $id="bf0e7394-9684-42b9-893b-5a9a6ecddd7e" arsvr1 \
>>> 	attributes standby="off"
>>> primitive apache2 lsb:apache2 \
>>> 	op start interval="0" timeout="60" \
>>> 	op stop interval="0" timeout="120" start-delay="15" \
>>> 	meta target-role="Started"
>>> primitive drbd_mysql ocf:linbit:drbd \
>>> 	params drbd_resource="r0" \
>>> 	op monitor interval="15s"
>>> primitive drbd_webfs ocf:linbit:drbd \
>>> 	params drbd_resource="r1" \
>>> 	op monitor interval="15s" \
>>> 	op start interval="0" timeout="240" \
>>> 	op stop interval="0" timeout="100"
>>> primitive fs_mysql ocf:heartbeat:Filesystem \
>>> 	params device="/dev/drbd/by-res/r0" directory="/var/lib/mysql" fstype="ext4" \
>>> 	op start interval="0" timeout="60" \
>>> 	op stop interval="0" timeout="120" \
>>> 	meta target-role="Started"
>>> primitive fs_webfs ocf:heartbeat:Filesystem \
>>> 	params device="/dev/drbd/by-res/r1" directory="/srv" fstype="ext4" \
>>> 	op start interval="0" timeout="60" \
>>> 	op stop interval="0" timeout="120" \
>>> 	meta target-role="Started"
>>> primitive ip1 ocf:heartbeat:IPaddr2 \
>>> 	params ip="10.10.10.193" nic="eth0" \
>>> 	op monitor interval="5s"
>>> primitive ip1arp ocf:heartbeat:SendArp \
>>> 	params ip="10.10.10.193" nic="eth0"
>>> primitive mysql ocf:heartbeat:mysql \
>>> 	params binary="/usr/bin/mysqld_safe" config="/etc/mysql/my.cnf"
>>> user="mysql" group="mysql" log="/var/log/mysql.log"
>>> pid="/var/run/mysqld/mysqld.pid" datadir="/var/lib/mysql"
>>> socket="/var/run/mysqld/mysqld.sock" \
>>> 	op monitor interval="30s" timeout="30s" \
>>> 	op start interval="0" timeout="120" \
>>> 	op stop interval="0" timeout="120" \
>>> 	meta target-role="Started"
>>> group MySQLDB fs_mysql mysql \
>>> 	meta target-role="Started"
>>> group WebServices ip1 ip1arp fs_webfs apache2 \
>>> 	meta target-role="Started"
>>> ms ms_drbd_mysql drbd_mysql \
>>> 	meta master-max="1" master-node-max="1" clone-max="2"
>>> clone-node-max="1" notify="true"
>>> ms ms_drbd_webfs drbd_webfs \
>>> 	meta master-max="1" master-node-max="1" clone-max="2"
>>> clone-node-max="1" notify="true" target-role="Started"
>>> colocation apache2_with_ip inf: apache2 ip1
>>> colocation apache2_with_mysql inf: apache2 ms_drbd_mysql:Master
>>> colocation apache2_with_webfs inf: apache2 ms_drbd_webfs:Master
>>> colocation fs_on_drbd inf: fs_mysql ms_drbd_mysql:Master
>>> colocation ip_with_ip_arp inf: ip1 ip1arp
>>> colocation mysql_on_drbd inf: MySQLDB ms_drbd_mysql:Master
>>> colocation web_with_mysql inf: MySQLDB WebServices
>>> colocation webfs_on_drbd inf: fs_webfs ms_drbd_webfs:Master
>>> colocation webfs_with_fs inf: fs_webfs fs_mysql
>>> order apache2-after-arp inf: ip1arp:start apache2:start
>>> order arp-after-ip inf: ip1:start ip1arp:start
>>> order fs-mysql-after-drbd inf: ms_drbd_mysql:promote fs_mysql:start
>>> order fs-webfs-after-drbd inf: ms_drbd_webfs:promote fs_webfs:start
>>> order ip-after-mysql inf: mysql:start ip1:start
>>> order mysql-after-fs-mysql inf: fs_mysql:start mysql:start
>>> property $id="cib-bootstrap-options" \
>>> 	dc-version="1.0.8-042548a451fce8400660f6031f4da6f0223dd5dd" \
>>> 	cluster-infrastructure="Heartbeat" \
>>> 	expected-quorum-votes="1" \
>>> 	stonith-enabled="false" \
>>> 	no-quorum-policy="ignore"
>>> rsc_defaults $id="rsc-options" \
>>> 	resource-stickiness="100"
>>>
>>> Any help please?
>>>
>>> Thanks,
>>>
>>> Liang Ma
>>> Contractuel | Consultant | SED Systems Inc. 
>>> Ground Systems Analyst
>>> Agence spatiale canadienne | Canadian Space Agency
>>> 6767, Route de l'Aéroport, Longueuil (St-Hubert), QC, Canada, J3Y 8Y9
>>> Tél/Tel : (450) 926-5099 | Téléc/Fax: (450) 926-5083
>>> Courriel/E-mail : [liang.ma at space.gc.ca]
>>> Site web/Web site : [www.space.gc.ca ] 
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org
>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker

More information about the Pacemaker mailing list