[Pacemaker] ManageRAID Constraints

[eugenio]

Hi, 
  I'm trying to figure out how to configure constraints for ocf:heartbeat:ManageRAID (RAID5) with iSCSI devices. 

This is a visual representation of my resources: 

A: Initiator_6 |
B: Initiator_7 | --> D: ManageRAID_MD2 --> E: other stuff relying the mounted FS
C: Initiator_8 |

These are the definitions: 
primitive Initiator_7 ocf:heartbeat:iscsi \
        params portal="172.20.4.12" target="iqn.2010-10.com.example:storage.drbd.iscsi040501" \
        op monitor interval="120" timeout="30" depth="0" \
primitive Initiator_8 ocf:heartbeat:iscsi \
        params portal="172.20.5.12" target="iqn.2010-10.com.example:storage.drbd.iscsi060701" \
        op monitor interval="120" timeout="30" depth="0" \
primitive Initiator_9 ocf:heartbeat:iscsi \
        params portal="172.20.6.12" target="iqn.2010-10.com.example:storage.drbd.iscsi080901" \
        op monitor interval="120" timeout="30" depth="0"
primitive ManageRAID_MD2 ocf:heartbeat:ManageRAID \
        params raidname="MD2" \
        op monitor interval="10" timeout="0" depth="0"

And here my /etc/HB-ManageRAID
MD2_UUID="dec8980a:3a7eba1a:d36d14f2:9c1f2fea"
MD2_DEV="md2"
MD2_MOUNTPOINT="/mnt/md2"
MD2_MOUNTOPTIONS="noatime"
MD2_LOCALDISKS="/dev/disk/iscsi/d1e1e429899fbd06796f8c9d-part1 /dev/disk/iscsi/38275716e86870dd6c85286a-part1 /dev/disk/iscsi/e101097db6842e0814b1e537-part1"

And the constraints: 
      <rsc_colocation id="RAID_MD2" score="INFINITY">
        <resource_set id="RAID_MD2-0" sequential="false">
          <resource_ref id="Initiator_7"/>
          <resource_ref id="Initiator_8"/>
          <resource_ref id="Initiator_9"/>
        </resource_set>
        <resource_set id="RAID_MD2-1" sequential="true">
          <resource_ref id="ManageRAID_MD2"/>
        </resource_set>
      </rsc_colocation>

When I manually start the Initiators on the same node and then ManageRAID everything works fine as soon as one of the target goes offline.

So, here my problems: 
1) how can I define the constraints so that the resources are automatically started in the correct order (group is not a good idea... see 2) )?
2) how can I define the constraints so that when one initiators goes offlinte ManagerRAID stays active (and working)?
3) is it possible to start ManageRAID with just 2 Initiators online?
4) finally, how can I recover from an Initiator failure when it comes again online?

Thank you.

Bye

Eugene
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20101122/f091296e/attachment-0001.html>