[Pacemaker] Problem with configuring stonith rcd_serial

[Eberhard Kuemmerle]

On 2 Nov 2010 16:15 02.11.2010 16:18, Eberhard Kuemmerle wrote:
> Hi,
> here is what you requested:
>
> TEST 1:
> stonith -t rcd_serial -p "test /dev/ttyS0 rts 2000" test
> ** (process:2928): DEBUG: rcd_serial_set_config:called
> Alarm clock
> # echo $?
> 142
>
> TEST 2:
> stonith -t rcd_serial hostlist="node2" ttydev="/dev/ttyS0" dtr_rts="rts"
> msduration="2000" -S
> ** (process:6851): DEBUG: rcd_serial_set_config:called
> stonith: rcd_serial device OK.
> # echo $?
> 0
>
> TEST 3:
> stonith -t rcd_serial hostlist="node2" ttydev="/dev/ttyS0" dtr_rts="rts"
> msduration="2000" -T reset node2
> ** (process:8142): DEBUG: rcd_serial_set_config:called
> Alarm clock
> # echo $?
> 142
>
> TEST 1 as well as TEST 2 caused a reboot of node2!
>
SORRY, that's wrong!
I wanted to say:
TEST 1 as well as TEST 3 caused a reboot of node2!



------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDirig Dr. Karl Eugen Huthmacher
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------