[Pacemaker] clone ip definition and location stops my resources...

Vadym Chepkov vchepkov at gmail.com
Tue May 11 15:47:53 UTC 2010


pingd is a daemon with is running all the time and does it job
you still need to define monitor operation though, what if the daemon dies?
op monitor  just have a different meaning for ping and pingd.
with pingd - monitor daemon
with ping - monitor connectivity

as for warnings:

crm configure property default-action-timeout="120s"

On Tue, May 11, 2010 at 11:00 AM, Gianluca Cecchi <gianluca.cecchi at gmail.com
> wrote:

> On Tue, May 11, 2010 at 1:13 PM, Vadym Chepkov <vchepkov at gmail.com> wrote:
>
>> First of all, none of the monitor operation is on by default in pacemaker,
>> this is something that you have to turn on
>> For the ping RA  start and stop op parameters don't do much, so you can
>> safely drop them.
>>
>>
>>
> Yes, but for the pacemaker:pingd RA I didn't need to pass the "op monitor"
> parameter to have it working....
>
> Also, in general I added the start/stop op parameters, because without them
> I get, for example with the command you suggested:
>
> [root at ha1 ~]# crm configure primitive pinggw ocf:pacemaker:ping \
> > params host_list="192.168.101.1" multiplier="200" timeout="3" \
> > op monitor interval="10"
> WARNING: pinggw: default-action-timeout 20s for start is smaller than the
> advised 60
> WARNING: pinggw: default-action-timeout 20s for monitor_0 is smaller than
> the advised 60
>
> Do I have to ignore the warnings?
> Or do I have to adapt the resource creation with:
> [root at ha1 ~]# crm configure primitive pinggw ocf:pacemaker:ping \
> > params host_list="192.168.101.1" multiplier="200" timeout="3" \
> > op start timeout="60"
>
> That gives no warnings (even if I would have expected the warning about the
> monitor_0 timeout as I didn't set it...???)
>
>
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20100511/7ef57e46/attachment-0002.htm>


More information about the Pacemaker mailing list