[Pacemaker] Is there any parameter for passing device explictly to lmrd ?
Andrew Beekhof
andrew at beekhof.net
Fri May 7 06:08:04 UTC 2010
# crm ra info IPaddr
Look for the nic variable
On Thu, May 6, 2010 at 5:46 PM, Aaditya kumar
<passion.for.systems at gmail.com> wrote:
> Hi All ,
> I am running pacemaker (latest version) on top of Heartbeat 3.0 .
> I am trying to configure an IP in failover mode.
> I am using ocf : heartbeat :IPaddr resource Agent for achieving
> above. But the resource agent cant
> find an interface ,Which is very strange because according to my
> route table it should.
>
> the error is :
> May 6 19:24:35 localhost lrmd: [2059]: info: RA output:
> (failover-ip:start:stderr) ERROR: Cannot use default route w/o netmask
> [10.0.0.5]
> May 6 19:24:35 localhost IPaddr[2115]: ERROR:
> /usr/lib64/heartbeat/findif failed [rc=1].
>
> Can anyone tell me how to get arround this error. IF I had to use just
> heartbeat then I could have specified the IP adrress ,netmask and device
> (eth0) to use for the IP alias But when I try to pass the same in CIB ,the
> lmrd gives error that wrong IP adress passed.
> Is there any parameter for passing device explictly to lmrd ?
>
>
>
>
> following is output of route -n
>
>
> [root at aadityaxcat3 ~]# route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 172.16.0.0 0.0.0.0 255.255.0.0 U 1 0 0 eth2
> 192.0.0.0 0.0.0.0 255.0.0.0 U 1 0 0 eth1
> 10.0.0.0 0.0.0.0 255.0.0.0 U 1 0 0 eth0
> 0.0.0.0 192.168.15.1 0.0.0.0 UG 0 0 0 eth1
> --------------------------------------------------------------------------
>
> Following is my CIB :
>
> node $id="58fc146a-8885-4fb8-ace4-535b9fd89777" aadityaxcat3
> node $id="ae72d19f-b1bd-478a-9f0d-951f95d8f90c" aadityaxcat2
> primitive failover-ip ocf:heartbeat:IPaddr \
> params ip="10.0.0.5" \
> op start interval="1s" timeout="90s" \
> op monitor interval="10s"
> primitive nfs-ip ocf:heartbeat:Filesystem \
> params device="example:/nfs" directory="/mnt/nfs" fstype="nfs" \
> op start interval="1s" timeout="90s" \
> op monitor interval="10s"
> property $id="cib-bootstrap-options" \
> stonith-enabled="false" \
> dc-version="1.0.7-d3fa20fc76c7947d6de66db7e52526dc6bd7d782" \
> cluster-infrastructure="Heartbeat" \
> no-quarum-policy="ignore"
>
>
> -------------------------------------------------------------------------------------
> Following is my ifconfig
> [root at aadityaxcat3 ~]# ifconfig
> eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:xx
> inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0
> inet6 addr: fe80::21a:4bff:fedc:4be4/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:8792 errors:0 dropped:0 overruns:0 frame:0
> TX packets:309 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:2174710 (2.0 MiB) TX bytes:33612 (32.8 KiB)
> Interrupt:16 Memory:f8000000-f8012800
>
> eth1 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:xx
> inet addr:192.168.15.130 Bcast:192.255.255.255 Mask:255.0.0.0
> inet6 addr: fe80::21a:4bff:fedc:4be6/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:77687 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2029 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:5290885 (5.0 MiB) TX bytes:429404 (419.3 KiB)
> Interrupt:17 Memory:fa000000-fa012800
>
> eth2 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:xx
> inet addr:172.16.0.2 Bcast:172.16.255.255 Mask:255.255.0.0
> inet6 addr: fe80::219:bbff:fe30:833f/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:5813 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2794 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:1474978 (1.4 MiB) TX bytes:682389 (666.3 KiB)
> Interrupt:17
>
> eth3 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:xx
> inet6 addr: fe80::219:bbff:fe30:8340/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:75352 errors:0 dropped:0 overruns:0 frame:0
> TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:4992321 (4.7 MiB) TX bytes:344 (344.0 b)
> Interrupt:18
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:98 errors:0 dropped:0 overruns:0 frame:0
> TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:7832 (7.6 KiB) TX bytes:7832 (7.6 KiB)
>
> ----------------------------------------------------------------------------------------------------------
>
>
> --
> Regards ,
> Aaditya.
>
> I want to change the world ,But God won't give me the source code.
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>
More information about the Pacemaker
mailing list