[Pacemaker] Pacemaker and drbd problem
subscriptions at ludmata.info
subscriptions at ludmata.info
Tue Jan 26 20:47:03 UTC 2010
Hi,
I have two node cluster, running Master/Slave drdb and fs resources (there
will be more resources later). Here are the details of the software I'm
using: Debian 5.03 stable, DRBD 8.3.7 compiled from source, corosync 1.1.2
and pacemaker1.0.6 installed from madkiss repository.
I have a problem, that I can't solve for two days and a lot of digging in
internet. The cluster works right in all cases but one - node1 runs Primary
DRBD and it is mounted the fs resource, than I simulate power loss (plug
out the power cord of node1) and node2 takes all resources, promotes DRBD
and mount the fs (so far so good).Then again I simulate power loss by
unplugging the power cord of node2. Then I power on node1, and it boots,
loads its stuff and start corosync and then the cluster resource manager
promotes DRBD to Primary on node1 (it should not!). That is a disaster,
because i intend to run SQL database on that cluster and that way I might
loose a huge amount of data. I also have ancient two node cluster running
heartbeat 1 and drbd 6.x with drbdisk resource, and its behavior in that
case is to stop and ask "My data may be outdated, are you sure you want to
continue?". I tried the same scenario without cluster engine (that is the
old way, isnt it) - enabled DRBD init scripts and repeated same steps. In
that particular case DRBD stopped waiting the other node and asks if i want
to continue (good boy, that is exactly what I want!). So, my problem must
be somewhere in configuration of resources, but I can't understand what I'm
doing wrong. So, let ask straight - How to do this in pacemaker. I just
want node1 stops and waits for my confirmation what to do or something of
that sort, but never ever promote drbd to master!
If somebody wonders why I do this scenario, let me explain: My company own
a APC Smart UPS, who in case of power loss shut down one node of each
cluster (we have two pairs of clusters in separate vlans, so I cant create
a 4 node cluster, which will solve this problem, at least partially) after
the level of the battery falls bellow certain level. If battery runs below
the critical level, the UPS kills all servers, but two our logging server
and one of DB nodes. If the power dont come, than ups kills the last node.
The only machine that waits to its the death is our logging server. When
the power comes, the UPS starts all servers, that are down. If that happens
when all nodes are down, we end with the following situation - the first
node that comes up become SynkSource, and that node may be not the last one
survived the UPS rage.
One of the possible sollutions is to use old heartbeat resource manager
drbddisk, that uses the drbd init script. But I don like it :)
Here are my configs:
corosync.conf
totem {
version: 2
token: 3000
token_retransmits_before_loss_const: 10
join: 60
consensus: 1500
vsftype: none
max_messages: 20
clear_node_high_bit: yes
secauth: off
threads: 0
rrp_mode: passive
#external interface
interface {
ringnumber: 0
bindnetaddr: 10.0.30.0
mcastaddr: 226.94.1.1
mcastport: 5405
}
#internal interface
interface {
ringnumber: 1
bindnetaddr: 10.2.2.0
mcastaddr: 226.94.2.1
mcastport: 5405
}
}
amf {
mode: disabled
}
service {
ver: 0
name: pacemaker
}
aisexec {
user: root
group: root
}
logging {
fileline: off
to_stderr: yes
to_logfile: no
to_syslog: yes
syslog_facility: daemon
debug: off
timestamp: on
logger_subsys {
subsys: AMF
debug: off
tags: enter|leave|trace1|trace2|trace3|trace4|trace6
}
}
-------------
drbd.conf
common {
syncer { rate 100M; }
}
resource drbd0 {
protocol C;
handlers {
fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
after-resync-target "/usr/lib/drbd/crm-unfence-peer.sh";
pri-on-incon-degr "echo o > /proc/sysrq-trigger ; halt -f";
pri-lost-after-sb "echo o > /proc/sysrq-trigger ; halt -f";
local-io-error "echo o > /proc/sysrq-trigger ; halt -f";
outdate-peer "/usr/lib/heartbeat/drbd-peer-outdater -t 5";
pri-lost "echo pri-lost. Have a look at the log files. | mail -s 'DRBD
Alert' root";
}
startup { wfc-timeout 0; degr-wfc-timeout 0; }
disk { on-io-error detach; fencing resource-only;}
net {
sndbuf-size 1024k;
timeout 20; # 6 seconds (unit = 0.1 seconds)
connect-int 10; # 10 seconds (unit = 1 second)
ping-int 3; # 10 seconds (unit = 1 second)
ping-timeout 5; # 500 ms (unit = 0.1 seconds)
ko-count 4;
cram-hmac-alg "sha1";
shared-secret "password";
after-sb-0pri disconnect;
after-sb-1pri disconnect;
after-sb-2pri disconnect;
rr-conflict disconnect;
}
syncer { rate 100M; }
on db1 {
device /dev/drbd0;
disk /dev/db/db;
address 10.2.2.1:7788;
flexible-meta-disk internal;
}
on db2 {
device /dev/drbd0;
disk /dev/db/db;
address 10.2.2.2:7788;
meta-disk internal;
}
}
-----------------------
crm:
crm(live)# configure show
node db1 \
attributes standby="off"
node db2 \
attributes standby="off"
primitive drbd-db ocf:linbit:drbd \
params drbd_resource="drbd0" \
op monitor interval="15s" role="Slave" timeout="30" \
op monitor interval="16s" role="Master" timeout="30"
primitive fs-db ocf:heartbeat:Filesystem \
params fstype="ext3" directory="/db" device="/dev/drbd0"
primitive ip-dbclust.v52 ocf:heartbeat:IPaddr2 \
params ip="10.0.30.211" broadcast="10.0.30.255" nic="eth1"
cidr_netmask="24" \
op monitor interval="21s" timeout="5s"
ms ms-db drbd-db \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1"
notify="true" target-role="Started"
location drbd-fence-by-handler-ms-db ms-db \
rule $id="drbd-fence-by-handler-rule-ms-db" $role="Master" -inf: #uname
ne db1
location lo-ms-db ms-db \
rule $id="ms-db-loc-rule" -inf: #uname ne db1 and #uname ne db2
colocation fs-on-drbd0 inf: fs-db ms-db:Master
colocation ip-on-drbd0 inf: ip-dbclust.v52 ms-db:Master
order or-drbd-bf-fs inf: ms-db:promote fs-db:start
order or-drbd-bf-ip inf: ms-db:promote ip-dbclust.v52:start
property $id="cib-bootstrap-options" \
no-quorum-policy="ignore" \
stonith-enabled="false" \
expected-quorum-votes="2" \
last-lrm-refresh="1264523323" \
dc-version="1.0.6-cebe2b6ff49b36b29a3bd7ada1c4701c7470febe" \
cluster-infrastructure="openais"
I hope somebody can help me, I am completely lost :(
More information about the Pacemaker
mailing list