[Pacemaker] Need help!!! resources fail-over not taking place properly...

Dejan Muhamedagic dejanmm at fastmail.fm
Thu Feb 18 15:32:33 UTC 2010 

Hi,

On Thu, Feb 18, 2010 at 08:22:26PM +0530, Jayakrishnan wrote:
> Hello Dejan,
> 
> First of all thank you very much for your reply. I found that one of my node
> is having the permission problem. There the permission of /var/lib/pengine
> file was set to "999:999" I am not sure how!!!!!! However i changed it...
> 
> sir, when I pull out the interface cable i am getting only this log message:
> 
> Feb 18 16:55:58 node2 NetworkManager: <info> (eth0): carrier now OFF (device
> state 1)
> 
> And the resource ip is not moving any where at all. It is still there in the
> same machine... I acn view that the IP is still assigned to the eth0
> interface via "# ip addr show", even though the interface status is 'down.'.
> Is this the split-brain?? If so how can I clear it??

With fencing (stonith). Please read some documentation available
here: http://clusterlabs.org/wiki/Documentation

> Because of the on-fail=standy in pgsql part in my cib I am able to do a
> failover to another node when I manuallyu stop the postgres service in tha
> active machine. however even after restarting the postgres service via
> "/etc/init.d/postgresql-8.4 start " I have to run
> crm resource cleanup <pgclone>

Yes, that's necessary.

> to make the crm_mon or cluster identify that the service on. Till then It is
> showing as a failed action
> 
> crm_mon snippet
> --------------------------------------------------------------------
> Last updated: Thu Feb 18 20:17:28 2010
> Stack: Heartbeat
> Current DC: node2 (3952b93e-786c-47d4-8c2f-a882e3d3d105) - partition with
> quorum
> 
> Version: 1.0.5-3840e6b5a305ccb803d29b468556739e75532d56
> 2 Nodes configured, unknown expected votes
> 3 Resources configured.
> ============
> 
> Node node2 (3952b93e-786c-47d4-8c2f-a882e3d3d105): standby (on-fail)
> Online: [ node1 ]
> 
> vir-ip  (ocf::heartbeat:IPaddr2):       Started node1
> slony-fail      (lsb:slony_failover):   Started node1
> Clone Set: pgclone
>         Started: [ node1 ]
>         Stopped: [ pgsql:0 ]
> 
> Failed actions:
>     pgsql:0_monitor_15000 (node=node2, call=33, rc=7, status=complete): not
> running
> --------------------------------------------------------------------------------
> 
> Is there any way to run crm resource cleanup <resource> periodically??

Why would you want to do that? Do you expect your resources to
fail regularly?

> I dont know if there is any mistake in pgsql ocf script sir.. I have given
> all parameters correctly but its is giving an error " syntax error" all the
> time when I use it..

Best to report such a case, it's either a configuration problem
(did you read its metadata) or perhaps a bug in the RA.

Thanks,

Dejan

> I put the same meta attributes as for the current lsb
> as shown below...
> 
> Please help me out... should I reinstall the nodes again??
> 
> 
> On Thu, Feb 18, 2010 at 6:50 PM, Dejan Muhamedagic <dejanmm at fastmail.fm>wrote:
> 
> > Hi,
> >
> > On Thu, Feb 18, 2010 at 05:09:09PM +0530, Jayakrishnan wrote:
> > > sir,
> > >
> > > I have set up a two node cluster in Ubuntu 9.1. I have added a cluster-ip
> > > using ocf:heartbeat:IPaddr2, clonned lsb script "postgresql-8.4" and also
> > > added a manually created script for slony database replication.
> > >
> > > Now every thing works fine but I am not able to use the ocf resource
> > > scripts. I mean fail over is not taking place or else even resource is
> > not
> > > even taking. My ha.cf file and cib configuration is attached with this
> > mail
> > >
> > > My ha.cf file
> > >
> > > autojoin none
> > > keepalive 2
> > > deadtime 15
> > > warntime 5
> > > initdead 64
> > > udpport 694
> > > bcast eth0
> > > auto_failback off
> > > node node1
> > > node node2
> > > crm respawn
> > > use_logd yes
> > >
> > >
> > > My cib.xml configuration file in cli format:
> > >
> > > node $id="3952b93e-786c-47d4-8c2f-a882e3d3d105" node2 \
> > >     attributes standby="off"
> > > node $id="ac87f697-5b44-4720-a8af-12a6f2295930" node1 \
> > >     attributes standby="off"
> > > primitive pgsql lsb:postgresql-8.4 \
> > >     meta target-role="Started" resource-stickness="inherited" \
> > >     op monitor interval="15s" timeout="25s" on-fail="standby"
> > > primitive slony-fail lsb:slony_failover \
> > >     meta target-role="Started"
> > > primitive vir-ip ocf:heartbeat:IPaddr2 \
> > >     params ip="192.168.10.10" nic="eth0" cidr_netmask="24"
> > > broadcast="192.168.10.255" \
> > >     op monitor interval="15s" timeout="25s" on-fail="standby" \
> > >     meta target-role="Started"
> > > clone pgclone pgsql \
> > >     meta notify="true" globally-unique="false" interleave="true"
> > > target-role="Started"
> > > colocation ip-with-slony inf: slony-fail vir-ip
> > > order slony-b4-ip inf: vir-ip slony-fail
> > > property $id="cib-bootstrap-options" \
> > >     dc-version="1.0.5-3840e6b5a305ccb803d29b468556739e75532d56" \
> > >     cluster-infrastructure="Heartbeat" \
> > >     no-quorum-policy="ignore" \
> > >     stonith-enabled="false" \
> > >     last-lrm-refresh="1266488780"
> > > rsc_defaults $id="rsc-options" \
> > >     resource-stickiness="INFINITY"
> > >
> > >
> > >
> > > I am assigning the cluster-ip (192.168.10.10) in eth0 with ip
> > 192.168.10.129
> > > in one machine and 192.168.10.130 in another machine.
> > >
> > > When I pull out the eth0 interface cable fail-over is not taking place.
> >
> > That's split brain. More than a resource failure. Without
> > stonith, you'll have both nodes running all resources.
> >
> > > This is the log message i am getting while I pull out the cable:
> > >
> > > "Feb 18 16:55:58 node2 NetworkManager: <info>  (eth0): carrier now OFF
> > > (device state 1)"
> > >
> > > and after a miniute or two
> > >
> > > log snippet:
> > > -------------------------------------------------------------------
> > > Feb 18 16:57:37 node2 cib: [21940]: info: cib_stats: Processed 3
> > operations
> > > (13333.00us average, 0% utilization) in the last 10min
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: crm_timer_popped: PEngine
> > Recheck
> > > Timer (I_PE_CALC) just popped!
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: do_state_transition: State
> > > transition S_IDLE -> S_POLICY_ENGINE [ input=I_PE_CALC
> > cause=C_TIMER_POPPED
> > > origin=crm_timer_popped ]
> > > Feb 18 17:02:53 node2 crmd: [21944]: WARN: do_state_transition:
> > Progressed
> > > to state S_POLICY_ENGINE after C_TIMER_POPPED
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: do_state_transition: All 2
> > > cluster nodes are eligible to run resources.
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: do_pe_invoke: Query 111:
> > > Requesting the current CIB: S_POLICY_ENGINE
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: do_pe_invoke_callback:
> > Invoking
> > > the PE: ref=pe_calc-dc-1266492773-121, seq=2, quorate=1
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: unpack_config: On loss of
> > > CCM Quorum: Ignore
> > > Feb 18 17:02:53 node2 pengine: [21982]: info: unpack_config: Node scores:
> > > 'red' = -INFINITY, 'yellow' = 0, 'green' = 0
> > > Feb 18 17:02:53 node2 pengine: [21982]: info: determine_online_status:
> > Node
> > > node2 is online
> > > Feb 18 17:02:53 node2 pengine: [21982]: info: unpack_rsc_op:
> > > slony-fail_monitor_0 on node2 returned 0 (ok) instead of the expected
> > value:
> > > 7 (not running)
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: unpack_rsc_op: Operation
> > > slony-fail_monitor_0 found resource slony-fail active on node2
> > > Feb 18 17:02:53 node2 pengine: [21982]: info: unpack_rsc_op:
> > > pgsql:0_monitor_0 on node2 returned 0 (ok) instead of the expected value:
> > 7
> > > (not running)
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: unpack_rsc_op: Operation
> > > pgsql:0_monitor_0 found resource pgsql:0 active on node2
> > > Feb 18 17:02:53 node2 pengine: [21982]: info: determine_online_status:
> > Node
> > > node1 is online
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: native_print:
> > > vir-ip#011(ocf::heartbeat:IPaddr2):#011Started node2
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: native_print:
> > > slony-fail#011(lsb:slony_failover):#011Started node2
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: clone_print: Clone Set:
> > > pgclone
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: print_list: #011Started:
> > [
> > > node2 node1 ]
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: RecurringOp:  Start
> > > recurring monitor (15s) for pgsql:1 on node1
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: LogActions: Leave
> > resource
> > > vir-ip#011(Started node2)
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: LogActions: Leave
> > resource
> > > slony-fail#011(Started node2)
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: LogActions: Leave
> > resource
> > > pgsql:0#011(Started node2)
> > > Feb 18 17:02:53 node2 pengine: [21982]: notice: LogActions: Leave
> > resource
> > > pgsql:1#011(Started node1)
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: do_state_transition: State
> > > transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS
> > > cause=C_IPC_MESSAGE origin=handle_response ]
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: unpack_graph: Unpacked
> > transition
> > > 26: 1 actions in 1 synapses
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: do_te_invoke: Processing graph
> > 26
> > > (ref=pe_calc-dc-1266492773-121) derived from
> > > /var/lib/pengine/pe-input-125.bz2
> > > Feb 18 17:02:53 node2 crmd: [21944]: info: te_rsc_command: Initiating
> > action
> > > 15: monitor pgsql:1_monitor_15000 on node1
> > > Feb 18 17:02:53 node2 pengine: [21982]: ERROR: write_last_sequence:
> > Cannout
> > > open series file /var/lib/pengine/pe-input.last for writing
> >
> > This is probably a permission problem. /var/lib/pengine should be
> > owned by haclient:hacluster.
> >
> > > Feb 18 17:02:53 node2 pengine: [21982]: info: process_pe_message:
> > Transition
> > > 26: PEngine Input stored in: /var/lib/pengine/pe-input-125.bz2
> > > Feb 18 17:02:55 node2 crmd: [21944]: info: match_graph_event: Action
> > > pgsql:1_monitor_15000 (15) confirmed on node1 (rc=0)
> > > Feb 18 17:02:55 node2 crmd: [21944]: info: run_graph:
> > > ====================================================
> > > Feb 18 17:02:55 node2 crmd: [21944]: notice: run_graph: Transition 26
> > > (Complete=1, Pending=0, Fired=0, Skipped=0, Incomplete=0,
> > > Source=/var/lib/pengine/pe-input-125.bz2): Complete
> > > Feb 18 17:02:55 node2 crmd: [21944]: info: te_graph_trigger: Transition
> > 26
> > > is now complete
> > > Feb 18 17:02:55 node2 crmd: [21944]: info: notify_crmd: Transition 26
> > > status: done - <null>
> > > Feb 18 17:02:55 node2 crmd: [21944]: info: do_state_transition: State
> > > transition S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS
> > > cause=C_FSA_INTERNAL origin=notify_crmd ]
> > > Feb 18 17:02:55 node2 crmd: [21944]: info: do_state_transition: Starting
> > > PEngine Recheck Timer
> > >
> > ------------------------------------------------------------------------------
> >
> > Don't see anything in the logs about the IP address resource.
> >
> > > Also I am not able to use the pgsql ocf script and hence I am using the
> > init
> >
> > Why is that? Something wrong with pgsql? If so, then it should be
> > fixed. It's always much better to use the OCF instead of LSB RA.
> >
> > Thanks,
> >
> > Dejan
> >
> > > script and cloned it as  I need to run it on both nodes for slony data
> > base
> > > replication.
> > >
> > > I am using the heartbeat and pacemaker debs from the updated ubuntu
> > karmic
> > > repo. (Heartbeat 2.99)
> > >
> > > Please check my configuration and tell me where I am missing....[?][?][?]
> > > --
> > > Regards,
> > >
> > > Jayakrishnan. L
> > >
> > > Visit: www.jayakrishnan.bravehost.com
> >
> >
> >
> >
> > > _______________________________________________
> > > Pacemaker mailing list
> > > Pacemaker at oss.clusterlabs.org
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> >
> > _______________________________________________
> > Pacemaker mailing list
> > Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> 
> 
> 
> -- 
> Regards,
> 
> Jayakrishnan. L
> 
> Visit: www.jayakrishnan.bravehost.com

> _______________________________________________
> Pacemaker mailing list
> Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker

More information about the Pacemaker mailing list