[Pacemaker] primitive dlm ocf:pacemaker:controld --> WARNING: dlm: default-action-timeout 20s for start is smaller than the advised 90
Jayakrishnan
jayakrishnanlll at gmail.com
Tue Apr 20 18:46:46 UTC 2010
Hello all,
Likewise one of my project is also in stand still because I am not able to
find packages for gfs2 and ocfs2 for my RHEL 5.3. Particularly the gfs-pcmk,
dlm-pcmk, clusterlib and also for the ocfs2 dlm packages. These are not in
the cluster labs and epel repos of RHEL 5.3.
How could I install gfs2 or ocfs2 in my RKEL 5.3 box. I need to create an
active/active pacemaker cluster. I am following the "Cluster From the
Scratch for fedora 12 V2"
Where could I find the packages for my RHEL 5.3 boxes. I cant ask my boss
for RHEL subscription for my test machines though!!
--
Regards,
Jayakrishnan. L
Visit:
www.foralllinux.blogspot.com
www.jayakrishnan.bravehost.com
On Mon, Apr 19, 2010 at 1:22 PM, Andrew Beekhof <andrew at beekhof.net> wrote:
> On Mon, Apr 12, 2010 at 2:26 PM, Roberto Giordani <r.giordani at libero.it>
> wrote:
> > Hi Andrew,
> > these are the rpms installed on Opensuse 11.2 x86_64 to obtain a cluster
> > with OCFS2 and DLM support on Xen kernel
> >
> > pacemaker-pygui-1.4-15.1.x86_64
> > pacemaker-1.0.8-4.x86_64
> > libpacemaker3-1.0.8-4.x86_64
> >
> > libdlm-2.99.08-10.4.x86_64
> > libdlm2-2.99.08-10.4.x86_64
> >
> > corosync-1.2.1-1.x86_64
> > libcorosync-1.2.1-1.x86_64
> >
> > heartbeat-3.0.2-2.x86_64
> > heartbeat-common-2.99.3-14.3.x86_64
> > heartbeat-resources-2.99.3-14.3.x86_64
> >
> > libglue2-1.0.3-1.x86_64
> > libgssglue1-0.1-8.2.x86_64
> > cluster-glue-1.0.3-1.x86_64
> >
> > resource-agents-0.9-2.1.x86_64
> >
> > ocfs2-tools-o2cb-1.4.1-25.6.x86_64
> > ocfs2console-1.4.1-25.6.x86_64
> > ocfs2-tools-1.4.1-25.6.x86_64
> >
> > libopenais2-0.80.3-26.2.x86_64
> >
> > Attached there are:
> > -) corosync.conf
> > -) corosync log
> > -) /var/log/messages
> >
> > -) xml configuration
> >
> > I've observed that opensuse 11.2 doesn't have heartbeat-common,
> > heartbeat-resources,
>
> heartbeat-common has been replaced by libglue2 and heartbeat-resources
> by resource-agents.
> you definitely shouldn't have both sets of packages installed.
>
> > libdlm, libdlm2 updated to 3.0.2-2,
>
> where did you get these from?
>
> > and if I try to install libopenais2-1.1.0-1.x86_64.rpm from clusterlabs,
> I
> > should remove ocfs2-tools, libdlm and pacemaker-pygui.
>
> right because they were built for (and therefor require) an older
> version than the ones on clusterlabs.org
> no wonder the dlm and ocfs2 aren't starting.
>
> either:
> a) only use what comes in 11.2
> b) install everything from clusterlabs.org and rebuild the gui, dlm
> and ocfs2-tools packages
>
> > So this semas the only way to have ocfs2 and dlm support on Opensuse 11.2
> > Any idea to run a pacemaker cluster with this scenario?
> > Thank you for your investigation :-)
> >
> > On 04/12/2010 09:10 AM, Andrew Beekhof wrote:
> >
> > Hi,
> >
> > Please provide (as compressed attachments): logs and the pacemaker
> > configuration
> > This is the minimum we require in order to comment intelligently on
> > your question.
> >
> > -- Andrew
> >
> >
> > On Sun, Apr 11, 2010 at 6:32 PM, Roberto Giordani <r.giordani at libero.it>
> > wrote:
> >
> >
> > Hello,
> > I've started a new cluster with 4 nodes that should work with ocfs2
> > When I try to configure the dlm primitive I've received the following
> > warning and the the dlm-clone doesn't start.
> >
> > crm(live)# cib new stack-glue
> > INFO: stack-glue shadow CIB created
> > crm(stack-glue)# configure primitive dlm ocf:pacemaker:controld op
> monitor
> > interval=120s
> > WARNING: dlm: default-action-timeout 20s for start is smaller than the
> > advised 90
> > WARNING: dlm: default-action-timeout 20s for stop is smaller than the
> > advised 100
> > WARNING: dlm: default-action-timeout 20s for start is smaller than the
> > advised 90
> > WARNING: dlm: default-action-timeout 20s for stop is smaller than the
> > advised 100
> > crm(stack-glue)# configure clone dlm-clone dlm meta interleave=true
> > WARNING: dlm: default-action-timeout 20s for start is smaller than the
> > advised 90
> > WARNING: dlm: default-action-timeout 20s for stop is smaller than the
> > advised 100
> > crm(stack-glue)# cib commit stack-glue
> > INFO: commited 'stack-glue' shadow CIB to the cluster
> > crm(stack-glue)# quit
> > bye
> >
> > This is the crm_mon status
> > ============
> > Last updated: Sun Apr 11 18:30:42 2010
> > Stack: openais
> > Current DC: node4 - partition with quorum
> > Version: 1.0.8-9881a7350d6182bae9e8e557cf20a3cc5dac3ee7
> > 4 Nodes configured, 4 expected votes
> > 1 Resources configured.
> > ============
> >
> > Online: [ node1 node2 node3 node4 ]
> >
> >
> > Failed actions:
> > dlm:0_start_0 (node=node2, call=5, rc=7, status=complete): not running
> > dlm:2_start_0 (node=node3, call=3, rc=7, status=complete): not running
> > dlm:0_start_0 (node=node1, call=3, rc=7, status=complete): not running
> > dlm:3_start_0 (node=node4, call=3, rc=7, status=complete): not running
> >
> >
> > Any idea?
> >
> > Regards,
> > Roberto.
> >
> > _______________________________________________
> > Pacemaker mailing list
> > Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> >
> >
> > _______________________________________________
> > Pacemaker mailing list
> > Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> >
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>
--
Regards,
Jayakrishnan. L
Visit:
www.foralllinux.blogspot.com
www.jayakrishnan.bravehost.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20100421/f9ec055f/attachment-0002.htm>
More information about the Pacemaker
mailing list