[Pacemaker] cluster refuses to start

[Raoul Bhatia [IPAX]]

On 10/15/2009 02:48 PM, Johan Verrept wrote:
> 
> Hello,
> 
>   I don't understand why heartbeat/pacemaker does not want to start.
> This is all logs there are...
> 
> 14:37:46 heartbeat [3010]: info: Version 2 support: yes
> 14:37:46 heartbeat [3010]: WARN: File /ub/etc/ha.d//haresources exists.
do you want to use v1 or v2?

> 14:37:46 heartbeat [3010]: WARN: This file is not used because crm is
> enabled
> 14:37:46 heartbeat [3010]: WARN: Core dumps could be lost if multiple
> dumps occur.
> 14:37:46 heartbeat [3010]: WARN: Consider setting non-default value
> in /proc/sys/kernel/core_pattern (or equivalent) for maximum
> supportability
> 14:37:46 heartbeat [3010]: WARN: Consider
> setting /proc/sys/kernel/core_uses_pid (or equivalent) to 1 for maximum
> supportability
> 14:37:46 heartbeat [3010]: WARN: Logging daemon is disabled --enabling
> logging daemon is recommended
> 14:37:46 heartbeat [3010]: info: **************************
> 14:37:46 heartbeat [3010]: info: Configuration validated. Starting
> heartbeat 3.0.0
> 14:37:46 heartbeat [3011]: info: heartbeat: version 3.0.0
> 14:37:46 heartbeat [3011]: info: Heartbeat generation: 1255609327
> 14:37:46 heartbeat [3011]: info: glib: ucast: write socket priority set
> to IPTOS_LOWDELAY on eth0
> 14:37:46 heartbeat [3011]: info: glib: ucast: bound send socket to
> device: eth0
> 14:37:46 heartbeat [3011]: info: glib: ucast: bound receive socket to
> device: eth0
> 14:37:46 heartbeat [3011]: info: glib: ucast: started on port 694
> interface eth0 to 192.168.250.233
> 14:37:46 heartbeat [3011]: info: glib: ucast: write socket priority set
> to IPTOS_LOWDELAY on eth2
> 14:37:46 heartbeat [3011]: info: glib: ucast: bound send socket to
> device: eth2
> 14:37:46 heartbeat [3011]: info: glib: ucast: bound receive socket to
> device: eth2
> 14:37:46 heartbeat [3011]: info: glib: ucast: started on port 694
> interface eth2 to 192.168.167.2
> 14:37:46 heartbeat [3011]: ERROR: glib: cannot lock line /dev/ttyS0
> 14:37:46 heartbeat [3011]: ERROR: make_io_childpair: cannot open
> serial /dev/ttyS0

please fix this ERROR and retry.

cheers,
raoul
-- 
____________________________________________________________________
DI (FH) Raoul Bhatia M.Sc.          email.          r.bhatia at ipax.at
Technischer Leiter

IPAX - Aloy Bhatia Hava OEG         web.          http://www.ipax.at
Barawitzkagasse 10/2/2/11           email.            office at ipax.at
1190 Wien                           tel.               +43 1 3670030
FN 277995t HG Wien                  fax.            +43 1 3670030 15
____________________________________________________________________