[Pacemaker] cluster doesn't failover
Dejan Muhamedagic
dejanmm at fastmail.fm
Fri Oct 30 10:12:37 EDT 2009
Hi,
On Fri, 30 Oct 2009 14:36 +0100, "Thomas Schneider"
<thomas.schneider at euskill.com> wrote:
> Hello,
>
> I'm trying to setup a cluster for shared storage with pacemaker, drbd,
> and
> nfs.
> I use two server and there is two network interface one each server, eth0
> connected to the network, and eth1 direct link betwene the two node for
> drbd
> replication,
>
>
> Eth1: replication link
> -------------- ----------------
> | Server 1 |------| Server 2 |
> -------------- ----------------
> | |
> Eth0 eth0
> | |
> External Network
> IPs
> - server1 (storage01): eth0:10.1.1.70 eth1:192.168.0.2
> - server2 (storage02): eth0:10.1.1.71 eth1:192.168.0.3
>
> I can migrate the resource between the to node, but the problem is when i
> make a hard power-off of server01 ( the server where is running the
> resource) the second server (server02) doesn't make failover. (the
> resource
> doesn't start)
> May you can take a look to my config file in the following
Really hard to say without logs. Otherwise, this is probably an issue
somewhere in the drbd setup. I guess that it's better to talk to the
drbd list.
Thanks,
Dejan
>
> Thanks for your help
>
> Thomas Schneider
>
> Drbd.conf
> ------------------------------------------------------------------------
> global {
> usage-count no;
> }
>
> common {
> syncer { rate 35M; }
> }
>
> resource nfs {
> protocol C;
> handlers {
> fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
> after-resync-target "/usr/lib/drbd/crm-unfence-peer.sh";
> }
> startup {
> degr-wfc-timeout 120; # 2 minutes.
> }
> disk {
> on-io-error detach;
> fencing resource-only;
> }
> net {
> max-buffers 2048;
> max-epoch-size 2048;
> }
> syncer {
> rate 35M;
> al-extents 257;
> }
> on storage01.myriapulse.local {
> device /dev/drbd0;
> disk /dev/sda4;
> address 192.168.0.2:7788;
> meta-disk /dev/sda3[0];
> }
> on storage02.myriapulse.local {
> device /dev/drbd0;
> disk /dev/sda4;
> address 192.168.0.3:7788;
> meta-disk /dev/sda3[0];
> }
> }
> ----------------------------------------------------------------------------
> ----------
>
> storage01:~# crm configure show
> node storage01.myriapulse.local \
> attributes standby="off"
> node storage02.myriapulse.local \
> attributes standby="off"
> primitive drbd_nfs ocf:linbit:drbd \
> params drbd_resource="nfs" \
> op monitor interval="15s" \
> meta target-role="Started"
> primitive fs_nfs ocf:heartbeat:Filesystem \
> params device="/dev/drbd/by-res/nfs" directory="/share"
> fstype="ext3" \
> meta is-managed="true"
> primitive ftp-server lsb:proftpd \
> op monitor interval="1min"
> primitive ip_nfs ocf:heartbeat:IPaddr2 \
> params ip="10.1.1.69" nic="eth0"
> primitive nfs-kernel-server lsb:nfs-kernel-server \
> op monitor interval="1min"
> group nfs fs_nfs ip_nfs nfs-kernel-server \
> meta target-role="Started"
> ms ms_drbd_nfs drbd_nfs \
> meta master-max="1" master-node-max="1" clone-max="2"
> clone-node-max="1" notify="true"
> location cli-standby-nfs nfs \
> rule $id="cli-standby-rule-nfs" -inf: #uname eq
> storage02.myriapulse.local
> colocation ftp_on_nfs inf: ftp-server nfs
> colocation nfs_on_drbd inf: nfs ms_drbd_nfs:Master
> order ftp_after_nfs inf: nfs ftp-server
> order nfs_after_drbd inf: ms_drbd_nfs:promote nfs:start
> property $id="cib-bootstrap-options" \
> dc-version="1.0.5-unknown" \
> cluster-infrastructure="openais" \
> expected-quorum-votes="2" \
> no-quorum-policy="ignore" \
> stonith-enabled="false"
> storage01:~#
> ----------------------------------------------------------------------
> Openais.conf
>
> storage02:~# cat /etc/openais/openais.conf
> # Please read the openais.conf.5 manual page
>
> totem {
> version: 2
>
> # How long before declaring a token lost (ms)
> token: 3000
>
> # How many token retransmits before forming a new configuration
> token_retransmits_before_loss_const: 10
>
> # How long to wait for join messages in the membership protocol
> (ms)
> join: 60
>
> # How long to wait for consensus to be achieved before starting a
> new round of membership configuration (ms)
> consensus: 1500
>
> # Turn off the virtual synchrony filter
> vsftype: none
>
> # Number of messages that may be sent by one processor on receipt
> of
> the token
> max_messages: 20
>
> # Limit generated nodeids to 31-bits (positive signed integers)
> clear_node_high_bit: yes
>
> # Disable encryption
> secauth: on
>
> # How many threads to use for encryption/decryption
> threads: 0
>
> # Optionally assign a fixed node id (integer)
> # nodeid: 1234
>
> # This specifies the mode of redundant ring, which may be none,
> active, or passive.
> rrp_mode: passive
>
> interface {
> # The following values need to be set based on your
> environment
> ringnumber: 0
> bindnetaddr: 10.1.1.0
> mcastaddr: 226.94.1.1
> mcastport: 5405
> }
> interface {
> # The following values need to be set based on your
> environment
> ringnumber: 1
> bindnetaddr: 192.168.0.0
> mcastaddr: 226.94.2.1
> mcastport: 5405
> }
> }
>
> logging {
> to_stderr: yes
> debug: off
> timestamp: on
> to_file: /var/log/openais/openais.log
> to_syslog: yes
> syslog_facility: daemon
> }
>
> amf {
> mode: disabled
> }
>
> service {
> # Load the Pacemaker Cluster Resource Manager
> ver: 0
> name: pacemaker
> use_mgmtd: yes
> }
>
> aisexec {
> user: root
> group: root
> }
>
>
> _______________________________________________
> Pacemaker mailing list
> Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
--
http://www.fastmail.fm - Access your email from home and the web
More information about the Pacemaker
mailing list